Reviews Zirconium Heated Oxygen Sensor

Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set-5 Pcs, 02 Oxygen Sensor Socket Offset Wrench Remover Tool,A7841F-FBA +Thread Chaser,by Lucky Seven

  • ...c M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
  • Oxygen Sensor Socket Wrench Set Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires，Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines..
  • 5 Pcs Oxygen Sensor Switch Socket Wrench Kit and Thread Chaser Set-3 types of universal socket wrenchs cover various situations of oxygen sensor location,6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar..
  • Oxygen Sensor Socket Wrench kit-Including 3 oxygen sensor sockets and 2 thread chasers for cleaning and repairing damaged threads,oem oxygen sensor wrench socket,oxygen sensor wrench socket,o2 oxygen sensor socket wrench,o2 sensor socket wrench,oxygen sensor wrench set,oxygen sensor wrench tool,oxygen sensor wrench kit,oxygen sensor wrench 1/2 drive,oxygen sensor wrench socket..
  • Automotive oxygen sensor removers,the items are the same as the pictures.We provide carefree return, Our aim at pursuing the maximum satisfaction of our buyers!oxyg....
Check Stock

MIROZO 234-4092 Oxygen O2 Sensor Downstream for Acura NSX 1995-1999, for Honda Civic 2001-2005, for Honda Odyssey 1996-1998, for Honda Prelude 1997-2001 1PCS

  • ...it has been contaminated by a faulty part or substance upstream, and correct the fault before replacing the sensor..
  • FEATURES OF THE MIROZO OXYGEN SENSOR - Internal Ceramic Insulation for optimal sensor performance.
  • Laser welded sensor body to keep out contaminants.
  • Dual Insulated Protective Cover Prevents premature zirconium sensor wear.
  • Sealed wire leads prevent water interference with electronic signal..
  • ADVANTAGES OF THE MIROZO OXYGEN SENSOR: Improve Engine Response & Performance.
  • Prevent premature failure of the catalytic converter..
  • An OBD Scan Tool will usually identify Oxygen (O2) Sensors by the Bank Number (B1 = Bank 1.
  • B2 = Bank 2) and Sensor Number (S1 = Sensor 1.
  • S2 = Sensor 2, etc.). Bank 1 is not on the same side of the engine for every vehicle. Bank 2 refers to the bank opposite Bank 1. Sensor 1 refers to the sensor before the catalytic converter. Other Terms: Upstream Sensor, Pre-Cat Sensor. Sensor 2+ typically refers to the sensor(s) after the catalytic converter. Other Terms: Downstream Sensor, Post-Cat Sensor..
  • FITMENT: Downstream for Acura NSX 1995 1996 1997 1998 1999, for Honda Civic 2001 2002 2003 2004 2005, for Honda Odyssey 1996 1997 1998, for Honda Prelude 1997 1998 1999 2000 20....
Check Stock

ATPEAM Oxygen Sensor Socket Set 3 Piece O2 Sensor Socket Set Oxygen Sensor Removal Tool Set 1/2in and 3/8in Sq Drive

  • Extra Durable: Constructed of heat-treated chrome vanadium steel, this oxygen sensor remover set is built for strength, durability, and longevity.
  • Application: Sockets O2 Sensor Tool Set lets you quickly and easily remove oxygen sensors, oil pressure sending unit, fuel injectors, and vacuum switches.
  • Features: 3/8-inch or 1/2-inch square drive to fit your O2 sensor wrench drives.
  • For use with ratchet, breaker bar, or hand wrench (driver tools not included).
  • Specification: The specification for these oxygen sensor sockets are: 1pc 3/8 inch Drive 7/8 inch (22 mm) Deep, 1pc 3/8 inch Drive 7/8 inch (22 mm) Crowfoot, and 1pc 1/2 inch Drive 7/8 inch (22 mm) Deep Crowfoot Sockets, 1pc plastic red or blue carrying case.
  • Wide Application: Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines.
Check Stock

ITEQ 7/8 Inch (22 mm) 6-Point by 1/2 Inch Drive Offset Oxygen Sensor Socket with Wide Side Cutout for Preventing Damage to Wires

  • Perfect tool for removing, inspecting, replacing and installing heated and non-heated oxygen sensors on most vehicles with computer-controlled engines.
  • The 6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 1/2” drive and 7/8” ends can be used with both ratchet and torque wrench.
  • The oxygen sensor socket's special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires.
  • Made of high-quality Chrome vanadium steel for extra strength and durability.
  • Suitable for oxygen sensors found on most modern vehicles.
Check Stock

ITEQ 5 Pcs Automotive Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set

  • Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines.
  • 3 types of universal socket wrenchs cover various situations of oxygen sensor location.
  • 6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar.
  • Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires.
  • Set Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
Check Stock

MIROZO 234-9009 Oxygen O2 Sensor Upstream for Toyota Avalon Camry Highlander RAV4 Sienna Solara for Lexus ES300 RX300 Air Fuel Ratio Sensor 1pcs

  • TIPS: If you are not sure whether this product is suitable for your model, please check your car in amazon vehicle adapter in the upper left corner, or in for m us your vehicle part number to let us check for you.
  • WHEN TO REPLACE: Once your fuel economy and per for mance will drop off pretty drastically,which shows the O2 sensor starts to fail. Your Check Engine light will be illuminated trouble codes relating to the O2 sensor will be stored in your engine control computer.
  • ADVANTAGES OF THE MIROZO OXYGEN SENSOR: Improve Engine Response & Performance.
  • Prevent premature failure of the catalytic converter..
  • FEATURES OF THE MIROZO OXYGEN SENSOR - Internal Ceramic Insulation for optimal sensor performance.
  • Laser welded sensor body to keep out contaminants.
  • Dual Insulated Protective Cover Prevents premature zirconium sensor wear.
  • Sealed wire leads prevent water interference with electronic signal..
  • FITMENT: Upstream Front for Lexus ES300 1998-1999, for Lexus RX300 1999-2003, for Toyota Avalon 1997-1999, for Toyota Camry 1997-2000, for Toyota Highlander 2001-2003, for Toyota RAV4 1997-2003, for Toyota Sienna 1999-2000, for Toyota Solara 1999-2000.
Check Stock

ABN Oxygen 02 Sensor Socket 7-Piece Tool Kit – 22mm (7/8in), 27mm, 29mm – All Vehicle O2 Removal and Installation

  • ...al sensor switches, vacuum switches, and brake light switches.
  • Each socket is permanently etched with size marking for your convenience.
  • MATCHES YOUR CAR: Universal fit for Audi, BMW, Citroen, Mercedes, Peugeot, Renault, Skoda, Vauxhall/Open (GM), and Volkswagen.
  • Sizes include 22mm (7/8”), 27mm, and 29mm.
  • For both heated and non-heated oxygen sensors.
  • Compatible with 3/8-inch and 1/2-inch ratchet drivers or extensions.
  • Side cutout sections allow the sockets to fit over wiring harness and prevent damage to wires.
  • BUILT TO LAST: Constructed from chrome-vanadium steel (CR-V) for extra strength and longevity.
  • Tools have a light coating of oil to protect them from rusting.
  • EASY STORAGE: Heavy-duty 9” x 2.25” x 8” inch (22.9cm x 5.7cm x 20.3cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
  • CONTENTS: Package includes (1) 29mm pressure/vacuum switch 6pt socket + (1) 22mm (7/8 inch) vacuum switch 6pt socket + (1) 22mm (7/8 inch) vacuum switch 12pt socket + (1) 27mm oil pressure sending unit socket + (1) 1-1/16 and 1 inch oil pressure sending unit socket + (1) 7/8 inch long oxygen sensor socket wrench + (1) 7/8 inch short oxygen sensor socket wrench + (1) carrying case.
Check Stock

Denso 234-4622 Downstream Oxygen Sensor with 4-Terminal Plug, Black

  • Designed to detect the amount of oxygen in the exhaust system. The mounting type is threaded.
  • Constructed from high quality material. The type of sensor is thimble and the thread diameter is 18mm.
  • Features double protection layer, aluminum oxide trap layer, PTFE filter and stainless steel housing.
  • Manufactured with precision to meet OE standards.
  • NOTE:Kindly refer to the user manual provided as a PDF manual in the product description section.
Check Stock

Denso 2344256 OXYGEN SENSOR

  • High Quality: A ABIGAIL Oxygen Sensor Features double protection layer, aluminum oxide trap layer, PTFE filter and stainless steel housing..
  • Interchange Part No.: A ABIGAIL Oxygen Sensor is Compatible with Bosch 15284 Denso 234-4668. This sensor will meet or exceed OEM standards, it is a direct replacement though it is NOT a genuine part..
  • Function:Lambda sensor can improve engine efficiency performance and fuel economy, reduce CO2 and other harmful emissions, extend expensive Catalytic ..
  • Performance: The metal shroud doesnot look as shiny as other Oxygen Sensors. Because it is made of SUS310 high temperature resistant material. And every single item is heated at 1562℉. The high temperature also mskes it stands wear and tear..
  • One Year Unlimited Warranty. Please use the Year & Make & Model drop down bar and check the wire length & plug & position to confirm the compatibility before placing orders. Please check your part pictures with our pictures, it must be completely same. Or it will not fit your car. It will save your time and cost. If you have any questions or the items you received with problems, contact us directly, we'll provide you with some professional suggestions within 24 hours..
Check Stock

Heated Oxygen Sensor 234-4622 13355 Downstream Sensor 2 for Toyota 4Runner Camry RAV4 Solara Tacoma Avalon Lexus ES300 ES300h ES330 GS300

  • High Quality: A ABIGAIL Oxygen Sensor Features double protection layer, aluminum oxide trap layer, PTFE filter and stainless steel housing..
  • Function:Lambda sensor can improve engine efficiency performance and fuel economy, reduce CO2 and other harmful emissions, extend expensive Catalytic Converter life..
  • Interchange Part number: A ABIGAIL Oxygen Sensor is Compatible with Bosch 13355 Denso 234-4622. These sensors will meet or exceed OEM standards, it is a direct replacement though it is NOT a genuine part..
  • The metal shroud doesnot look as shiny as other Oxygen Sensors. Because it is made of SUS310 high temperature resistant material. And every single item is heated at 1562. The high temperature also makes it stands wear and tear..
  • One Year Unlimited Warranty. Please use the Year & Make & Model drop down bar and check the wire length & plug & position to confirm the compatibility before placing orders. Please check your part pictures with our pictures, it must be completely same. Or it will not fit your car. It will save your time and cost. If you have any questions or the items you received with problems, contact us directly, we'll provide you with some professional suggestions within 24 hours..
Check Stock

Garage-Pro Oxygen Sensor After Catalytic Converter Compatible with 2003-2007 Honda Accord Fits 2004-2008 Acura TSX Heated 4-Wire Threaded-in type Fits K24A2 Engine

  • Garage-Pro Aftermarket Replacement Oxygen Sensor Compatible with 2003-2007 Honda Accord, Fits 2004-2008 Acura TSX.
  • Garage-Pro JCWARBH960908GP Features: Heated, 4-Wire, Threaded-in type.
  • Interchange Part Numbers: 25024476, 15409, 2344797.
  • A high quality, Direct Fit OE Replacement Oxygen Sensor with FREE 1-year UNLIMITED mileage warranty coverage on Garage-Pro items..
Check Stock

Ledaut Catalytic Converter Notched Style O2 Oxygen Sensor Bung and Plug 4 Bungs/ 4 Plugs M18X1.5

  • A. INTERCHANGE PART NUMBER/REPLACE OE: Perfect fit original equipment 15717、15716、15664、ZZC318861、XR3Z9G444CA. If the plug of the o2 sensor is....
  • B. VEHICLE COMPATIBILITY: For Select 1990-2011 FORD F-150/250/350, Explorer, Expedition, Escape, Escort, Excursion, E-150/250, Mustang, Ranger,....
  • C. CHECK THE FITMENT: Please check the Plug & Connector & Description for accurate information before buying this o2 sensors. Enter your vehicle model....
  • D.NIFEIDA OXYGEN SENSOR ADVANTAGE: 1) Made of high-quality stainless steel and other materials, strong durability, to ensure service life.
  • E.2-Year Warranty: Fast Delivery. Package Contains: 1*heated o2 sensor. 24-hours Online Friendly Customer Service. If there is a quality issue, it can....
Check Stock

Oxygen Sensor Replace OE Part # Bosch 17014 17315 Upstream Oxygen Sensor

  • Fitments: The 17014 oxygen sensor is fit for 2004-2006 Rolls-Royce. Please double check the fitment before your purchase. And you can get a more....
  • Replace OE #: The Apeixoto oxygen sensor is designed and manufactured with OE standard and can be replaced directly with fitted vehicles. The....
  • Function: Oxygen sensor is a key part to reduce the harmful emission and the increase the fuel efficiency. The Apeixoto oxygen sensor is wrapped with....
  • Solid Quality: Every sensor is 100% tested before shipping..
  • Warranty: You are backed by our Performance Assurance. this oxygen sensor comes with 30 Days HASSLE-FREE RETURN & 1 Year / 12 months unlimited....
Check Stock