Reviews Zinc coated Washer

Mini Skater 200PCS Small Cross Flat Head Tapping Wood Screws with Oxide and Wax 4 Size Screws Assortment Kit (Black&Bronze,200pcs)

  • [COATED SCREWS] 2.5 mil of computer controlled powder coating apllied over zinc plating and chromate sealer. Resists harmful UV rays and chemical breakdown. Completely free of volatile organic compounds (VOC), and is entirely recyclable.
  • [TYPE A FASTENER] Designed for use in wood framed buildings.
  • [RESCUE SCREW] Used in retrofit applications in which existing screws have stripped/backed out & need to be replaced with a larger diameter.
  • [EPDM RUBBER WASHER] Head and washer face captures the washer even when drive at an angle & are designed to maximize Pull over strength.
Check Stock

Octagon Washer Pitching / Horseshoes Game

  • The "Competition" Set... my personal favorite for the serious player..
  • Exterior glue at all joints of sanded kiln dried 2x4's.
  • Our Washer game measures 15” across with a 4” tube and 6 - 2 ½” washers..
  • Silver zinc and yellow zinc coated washers... nothing to chip or repaint ever!!.
Check Stock

HELIFOUNER 320 Pieces #8#10#14 Hex Washer Head Self Drilling Sheet Metal Screws Assortment Kit, 410 Stainless Steel

  • Type：25 PCS #14 x 2-1/2" Hex Washer Head Self Drilling Sheet Metal Tek Screws.
  • Screw Length：2-1/2 inch or 63mm (measured from under the head).
  • Point Type: Self Drilling Point, #3, appropriate for material thicknesses up to 0.22”.
  • 410 Stainless steel (no coating outside) which is superior to regular steel and zinc plated fasteners, provides good strength and corrosion resistance in bad environments..
Check Stock

Metal Roofing Screws 250 12 x 2 ZINC/NO Paint Hex ReGrip Sheet Metal Roof Screw Sharp Point Metal to Wood siding Screws.

  • #12 Sheet Metal ROOFING SCREWS.  Sharp Point ReGrip Screws. 5/16" Hex Head, ~9/16" Washer.
  • 250 COUNT Metal-to-wood roofing screws are galvanized and zinc coated to prevent rusting.
  • Hex washer head, sharp point roof screw with EPDM washer seal, seals roofing panel to screws..
  • Corrugated roofing and corrugated siding screws for pole barns, storage shed, shops, etc..
  • Galvanized Screw is Non-Painted and gets it's Color from the Galvanizing Process and is natural gray.
Check Stock

100 Qty #8 x 3/4\ Black Phillips Modified Truss Head Wood Screws (BCP1078)

  • [COATED SCREWS] 2.5 mil of computer controlled powder coating apllied over zinc plating and chromate sealer. Resists harmful UV rays and chemical breakdown. Completely free of volatile organic compounds (VOC), and is entirely recyclable.
  • [ZXL NO RUST] 5/16" Cupped HWH is manufactured from a strong ZAMAC zinc-aluminum alloy. Molded Head encapsulates the EPDM washer, which fits neatly and conforms to the inside of the mold.
  • [KS LO-ROOT THREAD DESIGN] Fastener thread transitions from fine to coase. The low root design provides excellent pullout strength versus traditional or HI-LO thread forms.
  • [MICRO-BIT POINT DESIGN] Drill point design consistently penetrades metal panels, eliminates the need to "punch" the metal panels with a sharp point to start the drilling process. MB point is excellent for penetrating multiple thicknesses of steel often found on ridge cap or trim applications.
Check Stock

10 PCS M14-2.0x45 MM Metric Hex Flange Bolts Grade 10.9 Screws Phos & Oil

  • Package Contents：5 sets, each include one hex bolt, hex nut, flat washer and lock washer.
  • Screw Length: 5" or 125mm (measured from under the head).
  • Made of 304 Stainless Steel (no coating outside) which is superior to regular steel and any zinc plated fasteners, provides good strength and corrosion resistance in bad environments.
Check Stock

USS Flat Washers 3/8\ (100 Pieces)

  • Zinc coating for a corrosion resistant finish.
  • USS coarse washers for coarse threaded bolts.
  • Washers are used to increase the pressure a bolt or screw provides.
  • Use a washer that is the same finish as your other fasteners.
Check Stock

The Hillman Group 270052 Flat Zinc Washers, 3/16-Inch, 100-Pack

  • Zinc coating for a corrosion resistant finish.
  • USS coarse washers for coarse threaded bolts.
  • Washers are used to increase the pressure a bolt or screw provides.
  • Use a washer that is the same finish as your other fasteners.
Check Stock

LIONMAX Wood Screws #8 x 2 Inch, Pocket Hole Screws 300PCS with Coarse Thread, Washer Head Square Drive, Self Tapping, Zinc Plated, Rust-Resistant, 150MM Drive Bit Included

  • 【For Pocket Hole】: Optimized screws length and washer head is designed for invisible pocket hole. Avoiding over-drilling, and effectively predicted the screw position while drilling..
  • 【Square Drive】: Deep square of pocket hole screws wide contacts with drive bit, 4 square edges reduce torque for driving, avoids stripping at driving work..
  • 【Coarse thread+Self-Tapping】: Wood screws with coarse thread and self-tapping tip provide aggressive power for drilling, use for treated lumber, pilot hole needed..
  • 【Zinc Coated】: Zinc coating fully protects inside of the pocket hole screw, without peeling off, provides greater rust resistance..
  • 【Package】: #8 x 2 Inch Pocket Hole Screws 300 Pieces, 150MM Square Drive Bit Included..
Check Stock

5/16-18 x 3\ (6 Sets) Stainless Steel Hex Bolts Screws with Nuts Flat Washers Lock Washers, 304 SS 18-8, Hexagon Head, Fully Machine Threaded, Bright Finish

  • Package Contents：6 sets, each include one hex bolt, hex nut, flat washer and lock washer.
  • Screw Length: 3" or 75mm (measured from under the head).
  • Made of 304 Stainless Steel (no coating outside) which is superior to regular steel and any zinc plated fasteners, provides good strength and corrosion resistance in bad environments.
Check Stock

LIONMAX Pocket Screws #8 x 1 Inch, Wood Screws Coarse Thread 600PCS, Washer Head Square Drive Screws for Pocket Hole, Self Tapping, Zinc Plated, Rust-Resistant, 150MM Drive Bit Included

  • 【For Pocket Hole】: Optimized screws length and washer head is designed for invisible pocket hole. Avoiding over-drilling, and effectively predicted the screw position while drilling..
  • 【Square Drive】: Deep square of pocket hole screws wide contacts with drive bit, 4 square edges reduce torque for driving, avoids stripping at driving work..
  • 【Coarse thread+Self-Tapping】: Wood screws with coarse thread and self-tapping tip provide aggressive power for drilling, use for treated lumber, pilot hole needed..
  • 【Zinc Coated】: Zinc coating fully protects inside of the pocket hole screw, without peeling off, provides greater rust resistance..
  • 【Package】: #8 x 1 Inch Pocket Hole Screws 600 Pieces, 150MM Square Drive Bit Included..
Check Stock

1/4-20 x 3/4" (10 Sets) Stainless Steel Hex Bolts Screws with Nuts Flat Washers Lock Washers, 304 SS 18-8, Hexagon Head, Fully Machine Threaded, Bright Finish

  • Package Contents：10 sets, each include one hex bolt, hex nut, flat washer and lock washer.
  • Screw Length: 3/4" or 19mm (measured from under the head).
  • Made of 304 Stainless Steel (no coating outside) which is superior to regular steel and any zinc plated fasteners, provides good strength and corrosion resistance in bad environments.
Check Stock

Clothes Ringer

  • ... Wringing wet laundry by hand can be quite TOILSOME and can hurt hands and wrists. It also takes FOREVER to finish your laundry and FOREVER for it to dry! Save yourself from pain, stress, and wasted time by investing in a Calliger 360 Laundry Wringer. Start effortlessly wringing out way more water than any portable washer / manual washer and actually have FUN on laundry day or car washing day! And of course, watch your laundry dry much faster!!.
  • NEW PATENTED DESIGN makes this wringer washer the only one on the market that can attach to vertical OR horizontal surfaces! This means it can attach to table tops, counters, saw horses, wash basins, etc. Simply switch the direction of the clamps to suit your needs! This hand crank washing machine comes with a well thought out clamp design that ALSO has angled clamps, allowing it to attach to a round OR square metal wash tub / galvanized wash tub..
  • INCREASED LIFESPAN: Not only is this wringer built like a tank, but every single metal piece of this wringer washer has been zinc plated AND powder coated for maximum weather resistance. The steel frame and roller shafts are virtually indestructible, making this superior hand clothes wringer outlast all others on the market. Great for thin and thicker clothing items,....
Check Stock