Reviews Zinc Ingot

GONGYI High-Purity Graphite Ingot Molds Mould for Melting Casting Refining Metal Copper Gold Silver Aluminum Brass #1-0.65kg-35ml-1.18fl. oz

• Specification: For 665g Gold / 320g Silver.
• Selected Material: Graphite ingot molds are made from high density fine grain graphite, 99.95% Graphite. Ash content less than 0.1%. Better for Refining than Silicon Carbide Graphite Crucibles..
• Well-made: The smooth cavity finish of the graphite ingot mold makes the ingot very easy to remove without sticking to the mold itself..
• Wide Application: The graphite ingot mold receives liquid metal of precious metals and other types of metals, such as gold, silver, metal, aluminum, copper, brass, zinc and so on, and conserves them until they are solidified.
• Extremely Durable: Great alkali resistance and corrosion, super acid and impact resistance..

4 Pieces Graphite Ingot Mould Crucible Ingot Casting Mould Silver 1 KG Gold Ingot Mould for Gold Silver Metal Aluminum Copper Brass Melting Casting Refining (90 x 40 x 20 mm)

• Package comes with: you will receive 4 pieces of graphite ingot moulds in the package, the sufficient quantities for you can meet your DIY requirements in daily life.
• Quality material: our casting ingot crucible moulds are mainly made of graphite material, almost no ash content to ensure that the metal refining process does not affect the purity of the metal, which are durable, sturdy, reliable and reusable, not easy to break or deform, you can use them for a long time.
• Size detail: the outside dimension of our silver gold ingot mould is approx. 100 x 50 x 25 mm/ 3.94 x 1.97 x 0.98 inch and the inner size is approx. 90 x 40 x 20 mm/ 3.54 x 1.57 x 0.79 inch, and the capacity is about 1 kg gold or 500 g silver, proper size can meet your daily needs.
• Good performance: our ingot crucible mould has good thermal conductivity, which can greatly shorten the melting time and save energy, and can withstand a temperature of 2000 degrees Celsius, good acid and impact resistance, good alkali resistance and corrosion resistance, 89 MPA compressive strength and 48.7 MPa flex resistance.
• Various applications: this graphite casting mould has a wide range of applications, it is suitable for experiments and melting of non-ferrous metals, such as gold, silver, metal, alumin....

2 Pieces Graphite Ingot Mould Crucible Mould for Casting Gold Silver Metal Aluminum Copper Brass Melting Refining (4 x 2 x 1 Inch)

• ...impact resistance, 89 MPA compression resistance, and 48.7 MPa flex resistance.
• Widely applicable: the mould can be applied for experiments and smelting of non-ferrous metals, such as gold, silver, copper, aluminum, and so on.
• Considering the size of this product, it is more suitable for small-capacity metal melting.
• Ingot mould size: 1KG graphite ingot mould outer is 100 x 50 x 25 mm/ 4 x 2 x 1 inch, inner is 90 x 40 x 20 mm/ 3.54 x 1.6 x 0.8 inch.
• 2KG graphite ingot mould outer is 100 x 60 x 40 mm/ 3.93 x 2.36 x 1.57 inch, inner is 85 x 45 x 30 mm/ 3.35 x 1.77 x 1.18 inch, melting and casting metals like gold, silver, brass, aluminum, copper, zinc, plumbum, and more.
• The capacity is an approximate volume is 1 kg hold or 500g silver.
• What you receive: there are 2 pieces of graphite ingot moulds in this package include 2 different size, enough quantity for you to use, improving your work efficiency in daily life.

Graphite Ingot Mold Silver Ingot Mould Gold Casting Ingot Crucible Mold for Melting Casting Refining Gold Silver Metal Aluminum Copper Brass (40 x 40 x 45 mm, 1000 g Gold/ 500 g Silver)

• ...t your most melting or casting needs for metals.
• Durable material: the main material is graphite, hardly ash content ensures that the metal purity will not be affected during the metal refining process.
• Fast cold and hot conditions, with good thermal stability, exquisite refining effect.
• Nice performance: our casting ingot crucible mold has nice thermal conductivity, which can highly shorten the melting time and save energy, and withstand 2000 degrees Celsius, nice acid and alkali resistance, nice corrosion resistance, impact resistance, 89 MPA compression resistance, and 48.7 MPa flex resistance, nice impact resistance performance to ensure the reliability of product quality.
• Wide uses: this ingot mould is suitable for experiments and melting of non-ferrous metals, such as gold, silver, brass, copper, aluminum zinc, lead and so on, also can be applied as graphite crucible melting into non-ferrous metals, test analysis, as the ingot mold and other purposes.
• Taking the size of the product into account, small-capacity metal melting are more suitable.
• Package contents: you will get 1 piece of graphite ingot mold with exquisite craftsmanship and versatile usages, which can meet your daily needs.
• You can also invite your friends or family to enjoy handmade fu....

Graphite Ingot Mold Melting Casting Mould for Gold Silver Metal (85x45x30mm - 665g Gold/320g Silver)

• 【Ingot Size】For 665g Gold / 320g Silver.
• Inner 2.56x 1.18 x 0.78 inch (1.18 fl oz). Melting and casting metals such as Gold, Silver, Brass, Aluminum, Copper, Zinc, Plumbum, etc..
• 【Composition:】99.95% Graphite. Ash content less than 0.1%. Better for Refining than Silicon Carbide Graphite Crucibles..
• 【Warm-Tips】Pure graphite crucible can NOT be heating by carbon furnace or charcoal kiln. It will be oxidized and cracked.
• Pure graphite will start to oxidize at 752 °F （400℃). The withstand temperatures can be 3200 °F if you use Air Electric Furnace. The withstand temperatures can be 5000 °F if you use Vacuum or Gas Protection Furnace..
• 【Package】1x Graphite Casting Melting Ingot. Well Packaged to ensure the item will be safely delivered..

3 Pieces Heart Star Cross Graphite Casting Ingot Mold Metal Refining Scrap Melting Casting Mould for Smelting Gold Silver Metal Aluminum Copper Brass Zinc

• Quality Graphite Material: made of quality graphite material, the ingot molds won't affect the metal purity during the metal refining process.
• Fast cold and hot conditions, with good thermal stability, producing exquisite refining effect for you.
• Detailed Size Information: the outside dimension of heart graphite casting mold is about 50 x 50 x 20 mm/ 1.97 x 1.97 x 0.79 inch, the inner is about 10 mm high.
• The cross graphite casting mold is about 88 x 47 x 8 mm/ 3.45 x 1.85 x 0.31 inch, the inner is 63 x 38 x 4 mm/ 2.48 x 1.5 x 0.16 inch.
• The star graphite casting mold is 50 mm/ 1.97 inches in length and width, 11.45 mm/ 0.45 inch on each side, proper in size for you to cast metal and make your own jewelry.
• Good Performance: the graphite molds for casting metal has nice thermal stability, which can withstand 2000 degrees Celsius, shorten the melting time and save energy, has good impact resistance and corrosion resistance to acid and alkali, good in performance to ensure the reliability of product quality.
• A Wide Range of Application: the casting ingot mold has a wide range of application, suitable for experiments and melting of non ferrous metals, such as gold and silver, brass, copper, aluminum, zinc and so on, they can also be applied for test analysi....

RotoMetals Zinc Ingot 99.7% min About 3.5 pounds Great for Small Castings/Weight- Made in USA

Tin Ingot 2 pounds | 99.9+% Pure Raw Tin Metal by MS MetalShipper

• ✔️ Tin Ingot (2 pounds | 99.9+% Pure) Our 2lb Tin Ingots are approximately 2lbs each and you will receive two ingots totaling 2lbs. They are all sourced directly from the Minsur mine in Peru where they are produced and are 100% virgin metal (not recycled). We sell this metal in ingot form, so if you need 8lbs total, simply add a quantity of 4 to your cart. Be sure to see our promotional discounts for certain quantity levels if you would like to save money per ingot..
• ✔️ USAGE - This is high purity tin that can be confidently used in any application where tin is required. This item is one of our best sellers because of its versatility and ease of use..
• ✔️ SIZE - Each tin ingot is approximately 4 inches long by 2 inches wide by 1.50 inches high. The exact size of each ingot will vary slightly..
• ✔️ SPECIFICATIONS - Meets ASTM B339 specification. * Atomic Number = 50 | Melting Point (F) = 450 | Atomic Mass= 118.71 | Boiling Point (F) = 4100 | Density (g/cm3) = 7.29. Analysis: TIN 99.9650%, ANTIMONY 0.0184%, LEAD 0.0049%, BISMUTH 0.0023%, COPPER 0.0020%..
• ✔️ PACKAGING - This 2lbs of tin ingot will arrive sealed inside of heavy duty BPA free plastic to prevent any corrosion or oxidation..

Tin Ingot 4 pounds | 99.9+% Pure Raw Tin Metal by MS MetalShipper

• ✔️ Tin Ingot (4 pounds | 99.9+% Pure) Our 4lb Tin Ingots are approximately 2lbs each and you will receive two ingots totaling 4lbs. They are all sourced directly from the Minsur mine in Peru where they are produced and are 100% virgin metal (not recycled). We sell this metal in ingot form, so if you need 12lbs total, simply add a quantity of 3 to your cart. Be sure to see our promotional discounts for certain quantity levels if you would like to save money per ingot..
• ✔️ USAGE - This is high purity tin that can be confidently used in any application where tin is required. This item is one of our best sellers because of its versatility and ease of use..
• ✔️ SIZE - Each tin ingot is approximately 4 inches long by 2 inches wide by 1.50 inches high. The exact size of each ingot will vary slightly..
• ✔️ SPECIFICATIONS - Meets ASTM B339 specification. * Atomic Number = 50 | Melting Point (F) = 450 | Atomic Mass= 118.71 | Boiling Point (F) = 4100 | Density (g/cm3) = 7.29. Analysis: TIN 99.9650%, ANTIMONY 0.0184%, LEAD 0.0049%, BISMUTH 0.0023%, COPPER 0.0020%..
• ✔️ PACKAGING - This 4lbs of tin ingot will arrive sealed inside of heavy duty BPA free plastic to prevent any corrosion or oxidation..

Pure Soft Lead Ingot

• ✔️ PEWTER INGOT 2LBS - 97LF - 97% TIN | 2.5% Bismuth | 0.5% COPPER. Our Pewter Ingots are approximately 2 pounds each and are made up of 97% Tin, 2.5% Bismuth, and 0.5% Copper. This is lead-free pewter and is very good to use for casting. We sell this Pewter in ingot form as shown in the product images. This type of Pewter is also known as Britannia Alloy. Be sure to see our promotional discounts for certain quantity levels if you would like to save money. MADE IN THE USA..
• ✔️ USAGE - This is lead-free pewter and is very good to use for casting. It melts easily and retains its shine. This pewter is used often in jewelry making and also making utensils, teapots, candlesticks, urns, maces, and drinking vessels. This item is one of our best sellers because of its versatility and ease of use..
• ✔️ SIZE - Each 2lb pewter ingot is approximately 4.25 inches long by 2 inches wide by 1.25 inches high.
• ✔️ SPECIFICATIONS - Melting Point (F) = 563 | Pouring Temp (F) = 650 | Density (g/cm3) = 7.28 | Analysis: TIN 92%, BISMUTH 2.5%, COPPER 0.5%..
• ✔️ PACKAGING - This 2lb pewter ingot will arrive sealed in heavy duty BPA free plastic to prevent any corrosion or oxidation. Each 2lb ingot is guaranteed to be 2lbs plus or minus 4%..

Pewter Ingot 97LF Fine Detail Pewter (2lbs | 97% Tin 2.5% Bismuth .5% Copper) Lead Free by MS MetalShipper

• ✔️ PEWTER INGOT 2LBS - 97LF - 97% TIN | 2.5% Bismuth | 0.5% COPPER. Our Pewter Ingots are approximately 2 pounds each and are made up of 97% Tin, 2.5% Bismuth, and 0.5% Copper. This is lead-free pewter and is very good to use for casting. We sell this Pewter in ingot form as shown in the product images. This type of Pewter is also known as Britannia Alloy. Be sure to see our promotional discounts for certain quantity levels if you would like to save money. MADE IN THE USA..
• ✔️ USAGE - This is lead-free pewter and is very good to use for casting. It melts easily and retains its shine. This pewter is used often in jewelry making and also making utensils, teapots, candlesticks, urns, maces, and drinking vessels. This item is one of our best sellers because of its versatility and ease of use..
• ✔️ SIZE - Each 2lb pewter ingot is approximately 4.25 inches long by 2 inches wide by 1.25 inches high.
• ✔️ SPECIFICATIONS - Melting Point (F) = 563 | Pouring Temp (F) = 650 | Density (g/cm3) = 7.28 | Analysis: TIN 92%, BISMUTH 2.5%, COPPER 0.5%..
• ✔️ PACKAGING - This 2lb pewter ingot will arrive sealed in heavy duty BPA free plastic to prevent any corrosion or oxidation. Each 2lb ingot is guaranteed to be 2lbs plus or minus 4%..

Graphite Ingot Mold, 60ml Capacity Crucible Mould, 2Packs Metal Casting Molds for Casting Melting Refining Gold Silver Aluminum Copper Brass Zinc Plumbum and Alloy (4\x2\x1\-1000g Gold; 540g Silver)

• [PREMIUM MATERIAL] - The ingot mold is made of 99.95% Graphite and ash content less than 0.1% which ensures that the metal purity will not be affected during metal refining. The metal casting molds feature with nice thermal stability and suitable for rapid cold and hot working conditions. The durable graphite ingot molds have a long working life and can be used as more as 20,000 times. Better than Silicon Carbide Graphite Crucibles..
• [INGOT MOLD SIZE] - Outer Dimension 3.93x1.97x0.98inch(100x50x25mm), inner dimensions 3.54x1.57x0.79inch (90x40x20mm). Volume 60ml. Capacity: 1000g Gold or 540g Silver..
• [HIGHLIGHT FEATURES] - Completed with good thermal conductivity, the ingot molds can greatly shorten the melting time and save energy. The premium graphite ingot molds can withstand up to 3600°F (2000 ℃). Strong acid and alkali resistance, good corrosion resistance, impact resistance, 75MPA compression resistance, and 55MPa flex resistance..
• [WIDE APPLICATION] - The metal casting molds can be applied for experiments and smelting of non-ferrous metals, such as gold, silver, copper, aluminum, lead and more. The ingot molds can also work as graphite crucible for melting into non-ferrous metals, test analysis, or other purposes..

Pewter Ingot 2lbs - Britannia Alloy - Lead Free By MS MetalShipper

• ✔️ PEWTER INGOT 2LBS - BRITANNIA ALLOY - 92% TIN | 7.5% ANTIMONY | 0.5% COPPER. Our Pewter Ingots are approximately 2 pounds each and are made up....
• ✔️ USAGE - This is lead-free pewter and is very good to use for casting. It melts easily and retains its shine. This pewter is used in many....
• ✔️ SIZE - Each 2lb pewter ingot is approximately 4.25 inches long by 2 inches wide by 1.25 inches high.
• ✔️ SPECIFICATIONS - Melting Point (F) = 563 | Pouring Temp (F) = 650 | Density (g/cm3) = 7.28 | Analysis: TIN 91.9708%, ANTIMONY 7.4992%, COPPER....
• ✔️ PACKAGING - This 2lb pewter ingot will arrive sealed inside of heavy duty BPA free plastic to prevent any corrosion or oxidation. Each 2lb....