Reviews Z wave Motion Detectors

Zooz Z-Wave Plus S2 Outdoor Motion Sensor ZSE29

  • OUTDOOR SENSOR: Introducing the first Z-Wave motion detector created for outdoor use. Monitor activity remotely through your Z-Wave hub (required, sold separately) and automate outdoor lighting based on motion. Keep away from direct rainfall and sunlight..
  • EASY TO INSTALL: Add it to your system quickly through auto-inclusion and mount it in minutes with just a couple of screws. Power it with batteries (included) or micro USB (cable + adapter sold separately). Program motion time-out and light level trigger by turning the knobs right on the sensor. New version (2.0) comes with advanced settings for motion sensitivity and lux reports if supported by your hub. Motion detection up to 20 feet..
  • COMPATIBILITY: The sensor works great on HomeSeer, Hubitat, Fibaro, and Vera. Custom device handler needed for SmartThings (go to Zooz support portal or contact seller for instructions). Does NOT work with Wink, Ring, ADT, or other Z-Wave alarm panels. Alexa is NOT a Z-Wave hub (the sensor won't work directly with Echo)..
  • SECURITY: Equipped with the latest authenticated S2 security protocol for encrypted signal and hacker-proof smart home (NOTE: your Z-Wave hub needs to support S2 for this feature to work). Tamper protection and low battery alerts for your peace of mi....
Check Stock

HomeSeer HS-MS100+ G2 Z-Wave Plus Motion Sensor

  • MOTION SENSOR: Sends Z-Wave commands back to the hub when motion has been sensed and when motion has not been sensed for a period of time..
  • EASY TO INSTALL: Includes 1-screw magnetic mount for easy installation anywhere in your home..
  • SECURE: Includes Z-Wave S2 encryption for the highest level of security..
  • COMPATIBILITY: Works with most Z-Wave hubs. Device handler available for SmartThings new app users..
Check Stock

HFS DC06 Microwave Radar Sensor Switch Module, 5.8G DC 5V Smart Motion Sensor Switch Board, Home Control Corridor Aisle Garage, etc

  • OUTDOOR SENSOR: Introducing the first Z-Wave motion detector created for outdoor use. Monitor activity remotely through your Z-Wave hub (required, sold separately) and automate outdoor lighting based on motion. Keep away from direct rainfall and sunlight..
  • EASY TO INSTALL: Add it to your system quickly through auto-inclusion and mount it in minutes with just a couple of screws. Power it with batteries (included) or micro USB (cable + adapter sold separately). Program motion time-out and light level trigger by turning the knobs right on the sensor. New version (2.0) comes with advanced settings for motion sensitivity and lux reports if supported by your hub. Motion detection up to 20 feet..
  • COMPATIBILITY: The sensor works great on HomeSeer, Hubitat, Fibaro, and Vera. Custom device handler needed for SmartThings (go to Zooz support portal or contact seller for instructions). Does NOT work with Wink, Ring, ADT, or other Z-Wave alarm panels. Alexa is NOT a Z-Wave hub (the sensor won't work directly with Echo)..
  • SECURITY: Equipped with the latest authenticated S2 security protocol for encrypted signal and hacker-proof smart home (NOTE: your Z-Wave hub needs to support S2 for this feature to work). Tamper protection and low battery alerts for your peace of mi....
Check Stock

Zooz 700 Series Z-Wave Plus 4-in-1 Sensor ZSE40 (Motion / Light / Temperature / Humidity)

  • 4 SMART SENSORS IN 1: This compact device detects and reports motion, temperature, humidity, and light level to your smart home app. Compatible Z-Wave hub required, sold separately..
  • NEW 700 SERIES VERSION: The included CR123A battery makes the sensor lasts much longer than any previous version. Updated motion detection allows you to get even quicker activity reports. New Z-Wave chip for better performance..
  • CUSTOMIZE IT: Choose from 7 levels of motion sensitivity, adjust the motion clear delay time, and pick from 3 different LED indicator modes (your hub needs to support advanced parameter input)..
  • SECURITY FIRST: This sensor is equipped with the latest S2 authenticated security and signal encryption. It's Z-Wave Plus 2 certified to ensure it complies with the highest industry standards. Supports SmartStart inclusion with a unique identifying PIN and QR code..
  • WILL IT WORK WITH MY HUB? This sensor is NOT supported by Wink, Vivint, ADT Pulse, Qolsys, or other Z-Wave alarm panels. It will work great with open systems like Hubitat, HomeSeer, Home Assistant, and compatible with SmartThings Hub..
Check Stock

Aeotec TriSensor, Z-Wave Plus S2 Enabled Zwave Motion Sensor, Temperature, Light Sensor, Work with Zwave Hub Smartthings 3-in 1 Security System, Battery Powered

  • 3-in 1 Motion, Temperature, Light sensor. Motion sensor accurate to 23 feet, TriSensor also detects temperature -10~50°C / 14~122°C with accracy of ±1°C, 0~30000 LUX with ±3% accracy..
  • Wireless and Cordless. Powered by 1 x CR123A battery, estimated battery life: 1 Year. Battery not packed with the box..
  • Adjustable calibration. Craft your own smart home with 3 levels of detecting calibration..
  • Compatible with certified Z-Wave gateways including: Samsung SmartThings, Vera, Zipabox, Open Z-Wave, Homeseer HS3, Domoticz, Isy994i ZW universal controller and more..
  • Z-Wave Plus and Z-Wave S2 certified for quicker response time, better wireless range up to 490 feet in open space, and additional wireless security encryption. Z-Wave Plus certification number: ZC10-18056128..
Check Stock

HomeSeer HS-FLS100 Z-Wave Plus Floodlight Sensor GEN 2

  • AUTOMATIC AND REMOTE CONTROL: Controls floodlights automtically when motion is sensed or remotely with Z-Wave commands..
  • MULTIPLE SENSORS: Built-in motion, temperature and light (LUX) level sensors report back to the hub..
  • EASY TO INSTALL: Works with standard floodlight fixtures and 120v incandescent & LED flood light bulbs..
  • COMPATIBILITY: Works with most Z-Wave hubs. Device handler avaialble for SmartThings new app users..
  • LATEST TECH: Includes Z-Wave Plus technology and S2 encryption for best performance and security..
Check Stock

GE Enbrighten Z-Wave Plus Smart Motion Light Switch, Compatible with Alexa, Google Assistant, SmartThings, Wink, Zwave Hub Required, Repeater/Range Extender, 3-Way Compatible, Black, 35547

  • VOICE CONTROL – ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). Works with the following Z-Wave certified hubs: SmartThings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera and more..
  • SELECtABLE MOTION CONTROL – Personalize the switch with three motion-detection options – occupancy, vacancy and manual. Occupancy mode turns lights ON/OFF automatically, while lights are turned on manually and off automatically in the vacancy setting. To deactivate the motion sensor, select manual operation. With five time-out duration options ranging from five seconds to 30 minutes and up to 180-degree detection coverage, the switch accommodates any room with varying amounts of activity. Additionally, enjoy custom scenes, versatile scheduling and convenient alerts with remote operation and voice control when connected to a compatible hub..
  • 3-WAY READY – The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723, 12728, 46199 or 46200. Up to four add-on switches can be connected to the same device..
  • FULL-HOME COVERAGE – Z-Wave Plus works with all previous Z-Wave generations to allow c....
Check Stock

Qubino Z-Wave Plus Smart On/Off Thermostat 2 ZMNKID3 (Z-Wave Hub Required)

  • UNIQUE Z-WAVE: The Stelpro KI is the first Z-Wave thermostat in North America to work with line voltage, with a 2-wire connection to the heater..
  • EFFICIENT HEATING: Remotely control your baseboard and convector heaters from your mobile device or computer (when included to a Z-Wave gateway controller - sold separately)..
  • SAVE SMART: Set your own temperature schedules to reduce energy bills with minimal effort.
  • take advantage of the device's ECO mode, designed to be as energy-efficient as possible..
  • ELEVATED CLIMATE CONTROL: Create advanced automations by pairing the Stelpro KI with other Z-Wave devices. Trigger the heating on/off with a door/window sensor, temperature sensor, motion sensor, etc..
  • CERTIFIED QUALITY: This thermostat is Z-Wave Plus and UL certified. Made in Canada. Works with SmartThings, Vera, HomeSeer, Nexia and Wink..
Check Stock

Enbrighten Z-Wave Plus Smart Motion Sensor Light Switch, On/Off, Vacancy / Occupancy Sensor, Includes White and Lt. Almond, Zwave Hub Required, Works with SmartThings, Wink, and Alexa, 26931

  • VOICE CONTROL – ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). Works with the following Z-Wave certified hubs: SmartThings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, Home Seer, Harmony Home Hub Extender, Vera and more..
  • SELECtABLE MOTION CONTROL – Personalize the switch with three motion-detection options – occupancy, vacancy and manual. Occupancy mode turns lights ON/OFF automatically, while lights are turned on manually and off automatically in the vacancy setting. To deactivate the motion sensor, select manual operation. With five time-out duration options ranging from five seconds to 30 minutes and up to 180-degree detection coverage, the switch accommodates any room with varying amounts of activity. Additionally, enjoy custom scenes, versatile scheduling and convenient alerts with remote operation and voice control when connected to a compatible hub..
  • 3-WAY READY – The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723, 12728, 46199 or 46200. Up to four add-on switches can be connected to the same device.Voltage:120 volt.
  • FULL-HOME COVERAGE – Z-Wave Plus works with all previous Z-Wave gener....
Check Stock

Enbrighten, White & Light Almond, GE Z-Wave Plus Smart Motion Light Dimmer, Works with Alexa, Google Assistant, SmartThings, Wink, Zwave Hub Required, Repeater/Range Extender, 3-Way Compatible, 26933

  • VOICE CONTROL – ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). Works with the following Z-Wave certified hubs: SmartThings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, Home Seer, Harmony Home Hub Extender, Vera and more..
  • SELECt MOTION CONTROL – The dimmer adjusts brightness levels of dimmable LED, CFL, incandescent and halogen lights from 0-100 percent to reduce energy costs and improve bulb life. Personalize the dimmer with three motion-detection options – occupancy, vacancy and manual. Occupancy mode turns lights ON/OFF automatically, while lights are turned on manually and off automatically in the vacancy setting. To deactivate the motion sensor, select manual operation. With five time-out duration options ranging from five seconds to 30 minutes and up to 180-degree detection coverage, the dimmer accommodates any room with varying amounts of activity. Additionally, enjoy custom scenes, versatile scheduling and convenient alerts with remote operation and voice control when connected to a compatible hub..
  • 3-WAY READY – The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723 or 46199. Up to fo....
Check Stock

Aeotec Multisensor 6 Z-Wave Plus 6-in1 motion temperature humidity light UV vibration sensor

  • 6-in-1 Z-Wave Plus MultiSensor: motion, humidity, temperature, light lux, UV, vibration sensor..
  • Super-small at 1.8 inches. Can be installed in corner, in-wall, on shelf or in downlight..
  • Works with certified Z-Wave gateways and tested with Fibaro, Indigo 7, openHAB, SmartThings, Vera..
  • Z-Wave Plus certified. Certification number: ZC10-15070011.
Check Stock

HomeSeer HSM200 Z-Wave Motion, Temperature and Light Sensor with RGB LED Indicator

  • Z-WAVE PLUS MULTISENSOR: Reports Motion, Temperature, Light Levels With Wireless Z-Wave Commands.
  • ANNUNCIATOR: RGB LED May Be Programmed To Glow 7 Different Colors When Things Happen In Your HomeSeer Controlled Smart Home.
  • LINE POWERED: Just Plug It Into Any 120-Volt US Style Receptacle | No Batteries To Replace.
  • WORKS AS REPEATER: Expands The Range And Performance Of Your Z-Wave Network.
  • COMPATIBILITY: Works with HomeSeer, Hubitat, Home Assistant and SmartThings (with HomeSeer Edge Driver). NOT FOR USE WITH Wink or Vera..
Check Stock

Zooz Z-Wave Plus Q Sensor ZSE11 | Motion, Temperature, Humidity, Light (Hub Required)

  • 4 SMART SENSORS: Get motion alerts and monitor temperature, humidity, and light to take your smart home to the next level. Use this device as the trigger to lighting automations, security alerts, or climate control. It's as versatile and as quick to report as can be. Compatible Z-Wave hub required (sold separately)..
  • FLEXIBLE MOUNT: Use the included mounting bracket to adjust the sensor's field of view and ensure precise monitoring. Power the sensor with batteries (included) or a micro USB cable (sold separately). Always use a single power source only. Works as a Z-Wave repeater when included on USB power..
  • Z-WAVE COMPATIBILITY: Most basic Z-Wave systems aren't advanced enough to display multisensors correctly. The ZSE11 Q Sensor is supported by: SmartThings (with a custom handler, instructions included with the product), Hubitat, Home Assistant, Indigo, Vera, and HomeSeer. Please do NOT buy this device if your hub isn't listed here, it will not be recognized by your system..
  • MINIMAL DESIGN: Simple and modern look to compliment any interior. This sensor is small enough for discreet monitoring of your home, office, or warehouse space..
  • MORE SECURITY: Includes S2 Authenticated Z-Wave security and SmartStart for the safest communication possible. Back by a ....
Check Stock