Reviews Z wave Compatible

Peanut Butter SmartSticks 3 Pack Bundle

  • LATEST Z-WAVE TECH: SmartStick+ Includes a 700 Series Z-Wave Module (v7.17x firmware) and is Z-Wave Plus V2 Certified.
  • SUPPORTS Z-WAVE S2 SECURITY: Includes Smart Start Inclusion (Requires Smart Start Compatible Hub or Software).
  • Z-FLASH COMPATIBLE: Works Nicely with HomeSeer Z-Flash OTA Firmware Updater.
  • Z-WAVE PLUS (V2) PERMORMANCE: Longest Range, Fastest Transmission Speed, Best Bandwidth.
  • SUPPORTS NETWORK BACKUP & RESTORE: Easily restore or move your network to another SmartStick+ (requires HomeSeer hub).
Check Stock

GoControl WD500Z-1 Z-Wave 500-Watt Wall-Mount Dimmer Switch

  • Z-wave & Manual Control For Connected Lights.
  • White.This device requires a neutral connection.
  • Easily replace existing standard switch to add a Z-Wave controlled lighting dimmer. Compatible with any Z-Wave certified gateway.
  • Linear Z-Wave products provide up to 100 feet range between the wireless controller and/or the closest Z-Wave device.
  • Linear has been providing best-in-class home & business control solutions for over 50-years and is a leading worldwide mfg.. of Z-Wave products.
  • Compatible with incandescent and most dimmable fluorescent, halogen, Xenon and LED fixtures and The wires are pre-cut for easy stripping..
Check Stock

Aeotec Range Extender 6, Zwave Extender, Z-Wave Plus Repeater, 2 Pack

  • Z-Wave Plus wireless signal repeater and range extender. Compatible with Z-Wave and Z-Wave Plus..
  • Amplifies and repeats weak signals boosting the range and reliability of weak Z-Wave devices..
  • Plug in to 110 volt wall socket. Small design so it does not block other outlets.
  • Compatible with all Z-Wave gateways including Control4, Fibaro, SmartThings, Vera and more..
  • Z-Wave Plus certified. Certification number: ZC10-16095239.
Check Stock

EATON RF9640-NDW Z-Wave Plus Universal Dimmer, White

  • Compatible Z-Wave controller/hub required.
  • Z-Wave Plus devices can be controlled through voice assistants such as Amazon Alexa or Google Home when used with compatible Z-Wave controller/hub.
  • Compatible with Z-Wave Plus accessory dimmer (RF9642-Z) for wireless 3-way control, eliminating the need for traditional 3-way wiring or dedicated traveler wire.
  • Can be associated with up to 5 other Z-Wave Plus devices.
  • Dimmable seven step blue LED display alongside push pad indicates selected light level - even in full daylight (coordinates light level status with associated dimmer accessory).
Check Stock

Optex TD-20U Indoor/Outdoor Wireless Infrared Transmitter

  • Works with Windows / Mac / Linux / Raspberry Pi 4 (2020 upgrade) to create a zwave hub for control of Z-Wave plus and Zwave devices, Tiny but powerful.
  • 1.1 x 0.4 x 3.5 inches in size and capable of controlling up to 232 different Z-Wave devices. package: 1x Z-Stick Gen5, 1x Manual, the others are not included.
  • Can be used to upgrade the firmware of compatible Z-Wave Plus devices that can accept OTA / wirelss firmware upgrades.
  • Compatible with Z-Wave enabled, home automation software including Home Assistant, Home Seer, Indigo 7, OpenHab, and OpenHab2. No software included.
  • Z-Wave Plus certified. Certification number: ZC10-15060006.
Check Stock

Aeotec Z-Stick Gen5 Plus Z-Wave Plus USB to Create Your Own Z-Wave Hub SmartStart and S2 Enabled Works with Raspberry Pi 4 Compatible with SmartThings HomeSeer and Others

  • Works with Raspberry Pi, Windows, Mac, Linux to create a z wave hub for control of Z-Wave and Z-Wave Plus devices.
  • Easier device setup than standard Z-Stick Gen5. Now supports SmartStart device installation when used with compatible software connect Z-Wave devices....
  • More secure than standard Z-Stick Gen5. Upgraded to offer Z-Wave Security 2 (S2) encryption, this Plus edition of Z-Stick is enhanced with AES 128-bit....
  • Faster than standard Z-Stick Gen5. Plus edition offers a 50% speed performance when communicating securely vs. non Plus edition. And can be used to....
  • Compatible with Z-Wave enabled, home automation software including Home Assistant, Home Seer, Indigo 7, OpenHab, and OpenHab2. No software included.....
Check Stock

Enbrighten 55256 Z-Wave Plus Smart Receptacle, Works with Alexa, Google Assistant, Tamper-Resistant, 1 ZWave 1 Always On Outlet Hub Required, White

  • "ALEXA COMPATIBLE - REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products (Alexa device and hub sold separately). CANNOT connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus)..
  • Requires a Z-Wave certified gateway. Compatible with the following Z-Wave certified Hubs: SmartThings, Wink, ADT Pulse, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Connect and Iris. Works with Alexa for voice control (hub required.
  • Wirelessly control lights or appliances by turning them on and off, schedule a timed event, or create a custom scene from anywhere in the world, at any time of the day. Works with all LED, CFL, Halogen, and Incandescent bulbs..
  • Features one always-on pass-through AC outlet and one Z-Wave enabled outlet with tamper resistant outlets..
  • Requires in-wall installation with hard-wired connections - Neutral wire is REQUIRED (wall plate not included).DescriptionTransform any home into a smart home with the GE Z-Wave plus wireless smart lighting control Duplex receptacle. The GE Z-Wave Duplex receptacle enables wireless control of on/off functions from the Z-Wave controlled outlet, and is compatible with incandescent, LED, xenon, halogen....
Check Stock

Minoston Z-Wave Plug 700 Plug-in Outlet Built-in Repeater Range Extender, Z-Wave Hub Required, Alexa and Google Assistant Compatible(MP31Z)

  • This Z-Wave plug is compatible with those Z-Wave hub: SmartThings, Vera, Wink, Fibaro, Homeseer, Ring, Honeywell, 2GIG, Hubitat(change device type). ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). CANNOT connect directly with ECHO PLUS！Z-Wave Frequency: 908.42MHz. FCC & ETL listed..
  • Z-Wave plug in outlet is 15A Max Loading for using with most of home lighting devices and home appliances..
  • Timer schedule: Control lights to come on or turn off via a schedule at certain times of the day to reduce your electricity bill, set up custom scenes with other devices enrich intelligent life..
  • Z-Wave 700 series chip for Smart Start and for most of Z-Wave hubs..
  • Easy to Setup: No wiring required. Simply plug in the device to a wall outlet and connect to your hub for convenient smart outlet features..
Check Stock

Aeotec Z-Stick Gen5 Z-Wave Hub Z-Wave Plus USB to Create Gateway (Ordinary White)

  • Works with Windows / Mac / Linux / Raspberry Pi 4 (2020 upgrade) to create a zwave hub for control of Z-Wave plus and Zwave devices, Tiny but powerful.
  • 1.1 x 0.4 x 3.5 inches in size and capable of controlling up to 232 different Z-Wave devices. package: 1x Z-Stick Gen5, 1x Manual, the others are not included.
  • Can be used to upgrade the firmware of compatible Z-Wave Plus devices that can accept OTA / wirelss firmware upgrades.
  • Compatible with Z-Wave enabled, home automation software including Home Assistant, Home Seer, Indigo 7, OpenHab, and OpenHab2. No software included.
  • Z-Wave Plus certified. Certification number: ZC10-15060006.
Check Stock

GoControl/Linear GD00Z-4 Z-Wave Garage Door Opener Remote Controller, Small, Black

  • Go Control z-wave products provide up to 100 feet range between the wireless controller and/or the closest z-wave device.
  • Nortek security & control/Go Control has been providing best-in-class home & business control solutions for over 50-years and is a leading worldwide mfg. . of z-wave products.
  • Garage door position sensor frequency: 345 MHz.
  • This product requires the use and pre-installation of a Z wave HUB..
  • Add Z-Wave control to your current garage door opener. Compatible with virtually any automatic garage opener w-sectional garage door.
  • Linear Z-Wave products provide up to 100 feet range between the wireless controller and/or the closest Z-Wave device.
  • Provides both audible and visual warnings prior to door movement.
  • Linear has been providing best-in-class home & business control solutions for over 50-years and is a leading worldwide mfg.. of Z-Wave products.
  • Specifications - Power: 120VAC, 50/60 Hz, Garage door position sensor frequency: 345 MHz, Z-Wave Frequency: 908.42 MHz.
Check Stock

EATON RF9642-ZDW Z-Wave Plus Accessory Dimmer, White

  • Compatible Z-Wave controller/hub required.
  • Z-Wave Plus devices can be controlled through voice assistants such as Amazon Alexa or Google Home when used with compatible Z-Wave controller/hub.
  • Must be used with Z-Wave Plus Master Dimmer (RF9640-N).
  • Multi-location dimming when used with master dimmer (RF9640-N).
  • Dimmable seven step blue LED display alongside push pad indicates selected light level - even in full daylight (coordinates light level status with associated dimmer accessory).
Check Stock

Aeotec Siren 6, Z-Wave Plus S2 Enabled Zwave Siren Safety Speaker, Wall-Mounted Sound & Light Security Intruder Zwave Alarm with Backup Battery, 110dB

  • Aeotec Zwave Siren 6 is your home smart indoor siren. Built with Z-Wave Plus S2 to be a smart home security siren, it features a 110dB speaker coupled with 1,000 lumens visual light alert strobe. Can be used as siren for security alarm, smoke sensor, and CO sensors via Z-Wave.
  • Pre-loaded 6 security sounds, 8 safety sounds, and 30 tones in total. Each tone is volume adjustable between 80dB and 110dB.
  • 4-hour backup battery lets Siren 6 work even when power is turned off.
  • Can also be used as doorbell by pairing with Aeotec Button. Can use up to 3 zwave buttons, each sold separately.
  • 5-Compatible with certified Z-Wave gateways including: Samsung SmartThings, HomeSeer, Open Z-Wave, Zipabox and more(Not compatible with Vera). Z-Wave Plus and Z-Wave S2 certified for quicker response time, better wireless range up to 490 feet in open space, and additional wireless security encryption. Z-Wave Plus certification number: ZC10-19046417..
Check Stock

Minoston Z-Wave Outdoor Dimmer Plug, Outdoor Smart Outlet Switch, Z-Wave Hub Required, Weatherproof, Built-in Repeater, Work with SmartThings, Wink, Alexa, Black(MP22ZD)

  • This Z-Wave outdoor dimmer plug compatible with those Z-Wave hub: SmartThings, Vera, Wink, Fibaro, Homeseer, Ring, Honeywell, 2GIG, Hubitat(change device type). ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). CANNOT connect directly with ECHO PLUS！Z-Wave Frequency: 908.42MHz. FCC & ETL listed..
  • 0-100% Dimming and Voice Control: This Z-Wave outdoor dimmer for string lights can adjust the light brightness from 0-100% by voice commands. Just say:“Hey Alexa, set the led strip lights to 75%”..
  • Ideal for Outdoor: IP65 weatherproof housing. Ideal for Garden, Backyard, Kitchen, Bathroom, Porch, Balcony, Garage, Basement, Patio or Electric grill, Sprinkler, Washing machine, Christmas tree, landscape lighting, fountains, lamps, pumps, and other outdoor or indoor-use electric appliances..
  • Schedule and Timer: You can set automatic daily timers or create on/off routing so that the Z-Wave plug can turn on and off automatically. And saving energy when the plugged-in appliances are not needed or are left on by accident..
  • 400W Max Power Z-Wave Dimmer Plug: The Z-Wave plug-in smart dimmer plug works with dimmable string lights in LED, INC bulb. Please make sure your string lights are dimmable and the total power is less than 400W. 150W Max for....
Check Stock