Reviews Z Edge Sdual Dash Cam Manual

Suction Cup Mount for Yi Dash Cam 2.7', Uniden Dashcam, Black Box G1w Dash Camera etc, Hold Tightly Removeable Easy to Install and Stand Heat, 2 Pcs

  • Stick to Window Strongly And Stand Heat Well. Our Experiment shows this suction mount can hang up 9 POUNDS of cola, the yi car camera weights about 0.5 pound, this suction cup mount can hold the YI dash cam tightly even in a bouncy work truck.
  • SIMPLE structure and FRIENDLY design, EASY to install, EASY to remove and reposition, EASY to adjust angle of the yi Smart Dash Cam to get a good view.
  • Fits Most Popular Dash Camera for Cars, Such Like G1W/ YI camera dash /Z-Edge/BlackBox/Spy Tec/Transcend/DOD/Papago/Vicovation/HP....
  • One Year Guarantee. Any problem in one year, just get a new one or MONEY BACK. We provide 2 suction mounts, but it doesn’t mean they are poor quality, we just want to give you more benefit.
Check Stock

Dash Cam Hardwire Kit, for Garmin 010-12530-03 Power Cord,for Garmin Dash Cam 45 55 65W 46 56 66W and Garmin Dash Cam Mini Power Cable 010-12530-01

  • Specially Design for Charging your Garmin Dash Cam Hardwire Kit.
  • 【24 Hours Surveillance 】 The vehicle hard-wire kit connected to car battery or fuse box power, can uninterruptedly supply power for dash camera for 24 hours. It can even supply power when the car is turned off.If the voltage of your car battery drops to 11.6V or 23.2V, the regulator will cut off the power,which leaves you with enough power to start your car.
  • Compatible with the following Garmin Dash cams:Dash Cam 45 , Dash Cam 55 ， Dash Cam 65w，Dash Cam 46 , Dash Cam 56 , Dash Cam 66W and Dash Cam Mini.
  • Input: 12v - 24v, Output: 5v 2A /Build in Dynamic IC Charge IC & Magnetic ferrite to prevent Electro-Magnetic shock,Low Voltage Protection, Overall 13ft hardwire kit can be installed basically on All vehicles. Input length: 3ft, Output length: 10ft..
  • WARRANTY: One year free service for any question you are facing with this dash cam hardwire kit. ( Package Contents ),Dashboard Camera Hardwire Kit ,Fuse Tap Cable x4 , Installing crowbar x1 ,User Manual,.
Check Stock

Sportway S10 Suction Cup Dash Cam Mount Holder with 6+pcs Joints for Rove APEMAN CHORTAU Roav Nexar iiwey YI Z-Edge Old Shark KDLINKS Falcon Zero... Most Car Dash Cameras

  • S10 with 6+pcs different joints, suitable for most popular brand dash cam, such as Rove APEMAN CHORTAU Roav Nexar iiwey YI Z-Edge Old Shark KDLINKS Falcon Zero… For the corresponding brand and model, please check the picture.
  • The mount uses POM and ABS plastics ,tolerable temperature range is :-40℃～120℃.
  • the suction cup uses PVC material, tolerable temperature range is :-20℃～70℃,and bearing weight up to 5kgs(11 lb).
  • Easy to Install,Remove the suction cup protective film and attach to a Clean and smooth surface to get Maximum holding strength on the Windshield. Easier to use than 3M Double-Sided Adhesive Mount Holder Bracket, no harm to car glass..
  • 270 degree rotation design,rotate ball adapter head provides flexibility for positioning the dash cam..
  • We offer 3-Year warranty for quality-related issues,and If this mount does not fit for your dash cam, welcome to visit Sportway other mounts, such as S10 S10Pro S20 S30 S40 S50 S60 S80… There’s always one for you!.
Check Stock

Dash Cam Mount, Sportway S10 Pro Suction Cup Dash Camera Mount Holder with 10+pcs Joints for Rove APEMAN CHORTAU Roav Nexar iiwey REXING Z-Edge Old Shark YI ... 98% Car Dash Cameras

  • S10 Pro with 10+pcs different joints, suitable for most popular brand dash cam, such as Rove APEMAN CHORTAU Roav Nexar iiwey REXING Z-Edge Old Shark YI Crosstour VANTRUE… For the corresponding brand and model, please check the picture.
  • The mount uses POM and ABS plastics ,tolerable temperature range is :-40℃～120℃.
  • the suction cup uses PVC material, tolerable temperature range is :-20℃～70℃,and bearing weight up to 5kgs(11 lb).
  • Easy to Install,Remove the suction cup protective film and attach to a Clean and smooth surface to get Maximum holding strength on the Windshield. Easier to use than 3M Double-Sided Adhesive Mount Holder Bracket, no harm to car glass..
  • 270 degree rotation design,rotate ball adapter head provides flexibility for positioning the dash cam..
  • We offer 3-Year warranty for quality-related issues,and If this mount does not fit for your dash cam, welcome to visit Sportway other mounts, such as S10 S10Pro S20 S30 S40 S50 S60 S80… There’s always one for you!.
Check Stock

Dash Cam Hardwire Kit, Mini USB, for ROVE R2-4K Car Dash Camera

  • 【Compatible for ROVE R2-4K Dash Cam with Mini USB】This dash cam hardwire kit is specially designed for ROVE R2-4K dash cam and most other dash camera with a Mini USB to be used for 24-hours parking monitor..
  • 【24/7 Parking Monitoring】ROVE R2-4K has a 24-Hours Parking Monitor feature – This feature is used with an R2-4K hard wire kit, which provides continuous power to your R2-4K dash cam when your car is parked..
  • 【Clean Installation – USB Car Charger NOT Required】You can use this dash cam hardwiring kit for clean installation in your car. This dashcam hardware kit connects to your car’s fuse box directly..
  • 【A Complete dashcam hard wiring kit 】All necessary fuse taps, volt meter, and other components are included in our kit for an easy installation and user experience that you will only get with ROVE..
  • 【Easy DIY Installation】Our products come with a beautifully written user manual, and how-to videos are also available for you..
Check Stock

Falcon Zero Original Mix

  • ★S60 with 10 different joints, suitable for most popular brand dash cam, such as Z-Edge/ YI /OldShark/Falcon Zero/G1W, G1W-B, G1W-C, G1W-CB.../HP....
  • ★Ultra-slim 9.70mm design,and Clamping Diameter range:13-51mm(0.5-2.0inch), very easy to install and suit most of car rearview mirrors.
  • ★Real 360 degree rotation design, adjust to any angle you want.
  • ★Using POM plastics and rubber material and Screw,Net weight: 56g, Bearing weight: up to 10kgs (22Ib).
  • ★Never fall off the windshield like the suction cup holder..
Check Stock

Suction Cup Mount for Yi Dash Cam 2.7 Black Box G1w Dash Camera etc Hold Tightly Removeable Easy to Install and Stand Heat 2 Pcs

  • Stick to Window Strongly And Stand Heat Well. Our Experiment shows this suction mount can hang up 9 POUNDS of cola, the yi car camera weights about....
  • SIMPLE structure and FRIENDLY design, EASY to install, EASY to remove and reposition, EASY to adjust angle of the yi Smart Dash Cam to get a good view.
  • Fits Most Popular Dash Camera for Cars, Such Like G1W/ YI camera dash /Z-Edge/BlackBox/Spy Tec/Transcend/DOD/Papago/Vicovation/HP....
  • One Year Guarantee. Any problem in one year, just get a new one or MONEY BACK. We provide 2 suction mounts, but it doesn’t mean they are poor....
Check Stock

Dash Camera for Cars, 1080P FHD Dash Cam Front and Inside, 240 Degree Rotatable Dashboard Camera Lens, 120° Wide Angle, 3-inch Dash Cam with Super Night Vision, WDR, G-Sensor, and Loop Recording

  • ...t and rear, 240-degree rotatable dashboard camera lens, 120° wide angle, 3-inch dash cam with super night vision, WDR, G-Sensor, and loop recording..
  • INSTALLATION & USE: This A68 dual dash cam is easy to install in your car and easily remove with (3M Stickers) bracket. You can also operate with the help of our user manual. First, you need to put in an SD card (not included) and connect the cam power adapter to the place of the car charger. The dash camera will start recording when the engine started. It will be stop recording when the car engine off..
  • AFTER-SALES 7/24 SUPPORT: We will be available on 7/24 for giving our valuable customer after-sale service to solve any problem while using our product..
Check Stock

Dash Cam for Cars 1080P FHD 2022 Car Dash Camera for Cars CHORTAU 3 inch Dashcam with Night Vision,170°Wide Angle, Parking Monitor, Loop Recording, G-Sensor

  • ...someone in parking, this video will be save & locked, thus providing you a video evidence. The car dash cam needs a constant power supply either from external battery pack or hard wire, hence ensuring your peace of mind with complete 24x7 monitoring of your car..
  • 【Easy Install & Operate】Professional dashcam user manual could be found in package or product page.This front dash cam is very easy to install and operate. The included suction mount could be easily attaches on your windshield in few minutes. Just insert the SD card and connect to the power supply. The mini dash cam will start recording immediately after igniting, shut down and save the video when you shut off the car engine..
  • 【Always standby Support 】CHORTAU is a remarkable company and believes in driving innovations to add value to our customers. We offer lifetime support for this dash camera. If you have any queries of this car dash cam,please reach our customer service team who will immediately respond within 12 hours..
Check Stock

iSportgo S30 Dash Cam Suction Mount with 5 Different Joints Kit for Z-Edge, Old Shark, YI,KDLINKS X1,Falcon Zero F170HD and Most Other Dash Cameras DVR GPS

  • ★★★NOTICE: iSportgo brand mount ONLY sold by “Leaderway USA” Store,and Fulfilled by Amazon ★S30 with 10pcs different joints, suitable for most popular brand dash cam, such as REXING,Z-Edge,Old Shark,YI,KDLINKS,Falcon Zero,Transcend,Crosstour,VANTRUE,Black Box,GoPro Hero……For the corresponding brand and model, please check the picture.
  • The mount uses POM and ABS plastics ,tolerable temperature range is :-40℃～120℃.
  • the suction cup uses PVC material, tolerable temperature range is :-20℃～70℃,and bearing weight up to 5kgs(11 lb).
  • Easy to Install,Remove the suction cup protective film and attach to a Clean and smooth surface to get Maximum holding strength on the Windshield..
  • 360 degree rotation design,rotate ball adapter head provides flexibility for positioning the dash cam..
  • Easier to use than 3M Double-Sided Adhesive Mount Holder Bracket, no harm to car glass.
Check Stock

Range Tour 360 Degree Rotatable Lens Dash Camera,Car DVR Full HD 1080P G-Sensor Night Vision Video Recroder Camcorder

  • 1080P Front & 480P Rear Dual Cams :Equipped [email protected] front cam, and 480P rear cam, this dash cam bring you a full site of both the front and....
  • Dash Camera Functions:Motion detection, G-sensor, loop recording, Screen Saverthese wonderful features makes this dash cam more user friendly..
  • Wide Angle Mount: Front 150 Degree Wide Angle / Rear 120 Degree Wide Angle Angle provide extra clear and broader field of your view. The front lens....
  • Easy Installation and Operation:Easy understanding operation system, detailed manual and our video can help you easily install and operate the dash....
  • The First Class After-sale Service:Range Tour promise you 30 days money back policy, 12 months warranty. Please just contact Range Tour directly if....
Check Stock

iSaddle Dash Cam Mirror Mount Holder - Professional Rearview Mirror Dash Cam Mount Holder with Various Joints fits 99% On-Dash Mounted Cameras

  • A MUST HAVE!!! - Easy To Mount Dash Cam Behind Car Rearview Mirror, Never Fall Down From The Windshield Any More..
  • EASY TO CUSTOMIZE! - Rotate to Any Angle You Need and Get Best Driver's View, Easy To Customize it With iSaddle Mounting Kit..
  • SUIT FOR 99% CARS! - 9.70mm Ultra-Slim Mounting Clip Fits 99% Vehicles(Make Sure the Stem of Rearview Mirror is Longer Than 0.4 Inch)..
  • SUIT FOR 99% CAMS! - Various Joints Fits 99% Dash Cams/Action Cams(For Yi/Rexing/Falcon/Z-Edge/Old....
  • 100% MONEY BACK GUARANTEE!!! - Purchase Now, Risk-Free. Feel Free to click the "Add to Cart" Button RIGHT NOW!.
Check Stock

Dash Cam Hardwire Kit, USB Type C, for ROVE R3 Touch Screen 3 Channel Dash Camera

  • 【Compatible for ROVE R3 Dash Cam with USB Type C】 This dash cam hardwire kit is specially designed for ROVE R3 touch screen, 3 channel dash cam to be used for 24-hours parking monitor..
  • 【24/7 Parking Monitoring】ROVE R3 has a 24-Hours Parking Monitor feature – This feature is used with an R3 hard wire kit, which provides continuous power to your R3 when your car is parked..
  • 【Clean Installation – USB Car Charger NOT Required】You can use this dash cam hardwiring kit for clean installation in your car. This dashcam hardware kit connects to your car’s fuse box directly..
  • 【A Complete dashcam hard wiring kit 】All necessary fuse taps, volt meter, and other components are included in our kit for an easy installation and user experience that you will only get with ROVE..
  • 【Easy DIY Installation】Our products come with a beautifully written user manual, and how-to videos are also available for you..
Check Stock