Reviews Xdm Suppressor Sights

Trijicon GL02 Night Sight Installation Tool Kit for Glock Models

  • Installation tool kit for Trijicon Bright & Tough and HD Night sight sets for Glock models.
  • Not compatible with Trijicon Suppressor Sights or Glock 42/43 models.
  • Contents: Rear sight pusher tool and front sight screwdriver for the small retaining screw.
  • Does not work with Trijicon Suppressor Sights.
  • Trijicon night sight tool kit for Glock models.
Check Stock

Suppressor Height Sights Set, Suppressor Sights for Precise Targeting, Front and Rear Sights Compatible for Glock 17 17L 19 26 27 33 34 38 39 All Models Except 42 and 43.

  • ...with a fortress finish coating for maximum protection. The matte black will reduce any glare with some standard sights. The front sight comes with a mounting screw and the rear sight has a co-witness setup combo, which improves stability and visibility during the day..
  • 【Higher Brightness & Precise Shooting】These suppressor height Glock sights set are raised up allowing you to see over the top through the window, which largely help increase higher brightness and precise shooting..
  • 【Special Three-dot Sight Design】Sits just high enough over the body to see but not overly high that it would take too much real estate in glass window. The front sight is slim and the rears are wide which are great for fast sight acquisition..
  • 【Easy to Install】These suppressor height sights set works well with all optics co-witness and is very easy to install. Step1.Loosen the allen head on the glock with the hex key allen wrench and then clean the holes up. Step2. Pull the hex nut screw off and install the front sight. Step3. Put your finger on the front sight and put the screw back. Step4. Slide and push the rear sight. Use the sight pusher tool if you rear sight is tight, do not try to use a hammer and punch..
  • 【Wide Compatibility】This suppressor front and rear....
Check Stock

Black Scorpion Outdoor Gear Springfield XD-M Elite 4.5'' IWB Belt Wing Tuckable HC23-XDM45-CF

  • Compatible with the Springfield Armory XD-M 4.5'' barel, XD-M Elite 4.5'' barrel. The Belt Attachment Clip is compatible with belts that are up to 1.5'' wide..
  • Red-Dot Friendly: Virtually compatible with any RMR or SRO.
  • Open Muzzle: Allows threaded barrels to pass through.
  • Raised Sight-Line: 15mm clearance for most suppressor height sights.
Check Stock

TRUGLO Glock Sight Installation Kit Glock Sight Installation Kit

  • Front and rear sight installation tools for Glock pistols.
  • Remove, install, or adjust factory or after-market sights.
  • Approved for use with tritium night sights.
  • Compatible with suppressor height sights.
  • Compatible with pistol Red-Dot sight mounts.
Check Stock

OWB Paddle Holster fits Sig P365 X-Macro (Carbon Fiber, Right-Hand Draw)

  • Compatible with the Sig P365 X-MACRO 3.1”. The Outside the Waistband Paddle Holster is a great option for everyday carry. These holsters feature the same competition speed cut that allows you to use red dots, raised suppressor sights, and threaded barrels. The paddle hooks to your pants and belt without the need of using a clip..
  • Holster is designed to be compatible with red dot, suppressor height sights and threaded barrel models. The undercut trigger guard prevents the holster from interfering when drawing your handgun..
  • Adjustable retention and holster angle from -30° – +30°.
Check Stock

Black Scorpion Outdoor Gear FNH 509 Compact/Midsize OWB Kydex Paddle Holster, HC03-PADDLEFN509CFRH

  • Compatible with the FN Herstal 509, 509 Compact, 509 Compact Tactical, Midsize. The Outside the Waistband Paddle Holster is a great option for everyday carry. These holsters feature the same competition speed cut that allows you to use red dots, raised suppressor sights, and threaded barrels. The paddle hooks to your pants and belt without the need of using a clip..
  • Holster is designed to be compatible with red dot, suppressor height sights and threaded barrel models. The undercut trigger guard prevents the holster from interfering when drawing your handgun..
  • Adjustable retention and holster angle from -30° - +30°.
Check Stock

Black Scorpion Outdoor Gear Springfield Armory XD-M Elite 4.5'' OWB Kydex HC03-PADDLE-XDM45-CFRH

  • Compatible with the Springfield Armory XD-M, XD-M Elite 4.5'' barrel. The Outside the Waistband Paddle Holster is a great option for everyday carry. These holsters feature the same competition speed cut that allows you to use red dots, raised suppressor sights, and threaded barrels. The paddle hooks to your pants and belt without the need of using a clip..
  • Holster is designed to be compatible with red dot, suppressor height sights and threaded barrel models. The undercut trigger guard prevents the holster from interfering when drawing your handgun..
  • Adjustable retention and holster angle from -30 degree - +30 degree.
Check Stock

Rear Sight Pusher Tool for Glocks Sight Removal Installation Adjustment Press Tool for Dovetail Sights

  • This sight pusher is designed, built, and assembled by hand in the United States. Each pusher is inspected for faults or errors, ensuring the highest quality product is being delivered directly to the consumer..
  • High grade polymer construction that won't scratch your new gun sights or your slide like metal pusher will.
  • Works for angled sights, flat sights, and suppressor height sights.
  • Portable design(6.13” x 3.5” x 1.06”) perfect for windage adjustments at the range.
Check Stock

Glock Suppressor Height Sights Fits Glock 48, 43 & 43X Tall Suppressor Height Sights Red Dot Co-Witness MOS Compatible

  • Versatility & Durability: Use in mid to high-light situations as your back up sights.
  • Much stronger than any other plastic Glock sights set.
  • V-Shape Sight Picture: Tyrant Designs suppressor height sights co-witness and offer a unique v shape sight picture helps narrow shot placements to the tiniest groupings.
  • Light Deflection: Chevron “v” stye serrations help deflect light at 45 degree angles instead of just one direction like other Glock sights.
  • Strong: Precision machined from aerospace grade aluminum for maximum durability and usability.
  • Tyrant's Glock sights are manufactured to last a lifetime.
Check Stock

Rear Sight Pusher Tool and Front Sight Tool for Glocks Sight Removal Installation Adjustment Press Tool for Dovetail Sights

  • This sight pusher is designed, built, and assembled by hand in the United States. Each pusher is inspected for faults or errors, ensuring the highest quality product is being delivered directly to the consumer..
  • High grade polymer construction that won’t scratch your new gun sights or your slide like metal pusher will.
  • Works for angled sights, flat sights, and suppressor height sights.
  • Portable design(6.13” x 3.5” x 1.06”) perfect for windage adjustments at the range.
Check Stock

Outerimpact Micro Red Dot Adapter for Springfield XD XD MOD 2 XDM XDS

  • Compatible Guns: XD, XD Mod 2, XDM, XDS, NON-OSP XDM Elite (will not work with 5.25).
  • Compatible Red Dot Sights (Mounting Screws INCLUDED): Holosun 407k/507k, Sig Romeo Zero, Shield RMSc, Swampfox Sentinel, JPoint, Crimson Trace 1550.
  • Coating: Anodize -- Finish: Black Anodize.
  • Mounting Hardware: (2) 6-48 Weaver T-10 Torx Head screws. (2) M3 x 8mm Flat Head Screws. (2) M3 x 6mm Socket Head Cap Screws. (2) M3x8mm Socket Head....
Check Stock

TRUGLO Tritium Handgun Glow-in-The-Dark Night Sights for Springfield XD Series Pistols

  • Fits Springfield XD Series (XD, XDS, XDE, XDM excluding 5.25" Comp Series).
  • Tritium night sights transition from standard white dot sights during the daylight, to glowing green dots in the the dark.
  • Utilizes quality Swiss tritium for maximum brightness and unmatched visibility in all shooting conditions 24/7.
  • Glows in the dark with no batteries or light sources needed.
  • Compact design maintains factory sight radius and fits standard holsters.
  • Angled rear sight edge for emergency one–hand operation.
Check Stock

XS SIGHTS DXT2 Standard Dot Night Sight for Glock Pistols (Glock Suppressor Height 17,19,22-24,26,27,31-36,38)

  • Suppressor Height. Fits Glock 17, 19, 22-24, 26, 27, 31-36, 38, 45 - All Generations, Including Mos Models. Front Sight Tool, Allen Key And Thread Locker Included..
  • Tritium Front & Rear DXT2 Big Dot Night Sights.  Full Tritium Night Sight Set Glows 24/7 Without Batteries For 10+ Years. Xs Tritium Iron Sights Provide A Highly Visible Sight Picture Day Or Night..
  • High Visibility Big Dot Front Sight.  The Big Dot Front Sight Is Available With A Photoluminescent Yellow Or Orange Glowing Dot Surrounding The Tritium Insert.  Increases Visibility In All Lighting Conditions.  DXT2s Offer The Fastest Front Sight Acquisition When Speed Matters..
  • Don’T Struggle To See Your Sights.  The Straight-Line Sight Picture – Dot-The-I- Draws The Eye To The Front Sight For Rapid Acquisition.  Center The Dot Over The Vertical Bar For Precision Sight Alignment.   Helps Overcome Eyesight Issues..
  • Steel Sights, Made In The USA, No Questions Asked Warranty.  XS Sights Are Machined In Fort Worth, TX From American Made Steel.  We Stand Behind Our Products With A 10-Year, No Questions Asked Warranty. .
Check Stock