Reviews Wort Transfer Pump

Happybuy Beer Brewing Pump Stainless Steel Head with 1/2 Inch Mpt Magnetic Home Brew Pump 110 Volt Inline Home Brewing System Beer Pump

  • Specifications: 1/2inch MPT Inlet&Outlet.
  • With 19 LPM (5 GPM) max flow rate, our beer pump can lift max 3.4 m (10 ft)..
  • Safe Transfer Liquids: Tested for safety and performance standards, it can transfer hot and cold liquids quickly and safely. Comply with FDA food standards, can be used in prpfessional occasions. Food grade pump can withstand caustic chemicals and can be effectively sanitized..
  • Quiet and Efficient: The separation of the pump main shaft and the impeller achieves the effect of damping and preventing vibration, and reduces the impact of the motor vibration on the pump. With excellent smooth running and efficient quiet cycle..
  • Easy Operation: Prime by running liquid through pump prior to turning on.
  • The liquid travels from the bottom of the valve into the pump, and once device is powered on (plugged in to outlet), the propeller circulates liquid for maximum flow.
  • Use to dispense beer, treat water, transfer hot water from your kettle to a mash tun, or recirculate mash wort and sparge and transfer to a brew kettle.
  • Used Widely: This homebrew beer pump is an optimum liquid transport pump with high output volume and quiet operation for industrial and home equipment..
Check Stock

Coldbreak Homebrew 6-11 Gallon Batch Copper Immersion Wort Chiller, Large, 3/8” x 60' Pure Copper, Leak Free Compression Barbs, Tubing and Garden Hose Fitting, USA Made

  • ...ion type, this counterflow wort chiller has much less risk of getting any wild yeast into the pot to damage wort taste since it is used outside the brewing kettle, won't interfere hop additions, don't need to worry about the surface oil occurring, smaller size for easy storage, chills beer fastly since chilling and transfer to the fermenter are done simultaneously, uses less water!.
  • Faster and less hassle than making an ice bath for your wort: With this counterflow hot liquid accelerated cooler, no more filling the sink with ice water and having to replace ice several times, no more long waiting hours to get to proper temperature cooling your wort, only several mins to get to cooling target degrees with water running at a trickle. Treat yourself to this wort chiller to make brewing batches of beer easier rather than putting ice in the bathtub..
  • No leaks and equipped with super long dispensing hose: Comes with all things needed to get this wort chiller up, you don't need to buy dispensing hose separately, I.D 9mm silicone hose fits O.D 10mm hose barb and O.D 9.52mm stainless tube of the wort chiller, hose clamps ensure a water tight fit and great sealing. There won't be any water running into your wort since the water runs in the outer plastic hose....
Check Stock

Happybuy MP-15RM beer brewing pump Plastic Head with 0.5 inch MPT Magnetic home brew pump 110 Volt Inline Home Brewing System Beer Pump

  • 【EASY OPERATION】- Prime by running liquid through pump prior to turning on.
  • Use to dispense beer, treat water, transfer hot water from your kettle to a mash tun, or recirculate mash wort and sparge and transfer to a brew kettle.
  • The liquid travels from the bottom of the valve into the pump, and once device is powered on (plugged in to outlet), the propeller circulates liquid for maximum flow.
  • 【OPERATION QUIET】 – Advanced magnetic drive technology with static-impeller, without any leakage ever.Brew pumps very quiet..
  • 【USED WIDELY】 -This homebrew pump is an optimum liquid transport pump with high output volume and quiet operation for industrial and home equipment..
  • With 19 LPM (5 GPM) max flow rate, our beer pump can lift max 3.4 m (10 ft)..
  • 【SPECIFICATIONS】-1/2inch MPT Inlet&Outlet.
  • 【MATERIAL】- The food grade pump MP-15RM features with food grade high temp plastic head 1/2 inch thread to transfer hot and cold liquids, is the most efficient way to move piping hot and heavy loads of liquid.
Check Stock

Ferroday 20 Plate Wort Chiller Stainless Steel Brazed Plate Heat Exchanger 1/2 NPT Thread Plate Chiller (7.5\ x 1.97\)

  • [Durable Material]: This wort chiller is made of 304 stainless steel plates with 99.9% copper brazed. Using this plate chiller can reduce oxidation in your homebrew heat exchange..
  • [Quickly Chilling Beer Wort]: This compact heat exchanger is designed for chilling your beer/ wort/water. Compared with the immersion chiller, our heat exchanger has 20 brazed plates and cools wort within minutes rather than several hours..
  • [Easy To Clean Out]: The heat exchanger can't be dissembled to clean. So firstly you can run 5 gallons of cleaning solution through this chiller. Then running some clear water through the wort chiller. After done, dry the chiller before storage..
  • [Can Work With Water Pump]: The wort-in port of the chiller connect your mash tun, the wort-out port connect your fermenter, the wort can be transferred by a wort pump. One side of the water hose connects to your water tap and the other side connects to the water-in port of our plate chiller. Using another hose to connect the water-out port of the chiller to remove the warm water..
  • [Multifunctional Usage]: Using for cooling wort/beer/water. It's perfect to use in the lab, for beer brewing, or for any application that requires the exchange of heat between two fluids. Please install a filter for the ....
Check Stock

FERRODAY Wort Chiller 30 Plate 1/2 NPT Plate Chiller Stainless Steel Brazed Plate Heat Exchanger 1/2 Thread Plate Chiller - 7.3' x 2.8'

  • [Durable Material]: This wort chiller is made of 304 stainless steel plates with 99.9% copper brazed. Using this plate chiller can reduce oxidation in your homebrew heat exchange..
  • [Quickly Chilling Beer Wort]: This compact heat exchanger is designed for chilling your beer/ wort/water. Compared with the immersion chiller, our heat exchanger has 30 brazed plates and cools wort within minutes rather than several hours..
  • [Easy To Clean Out]: The heat exchanger can't be dissembled to clean. So firstly you can run 5 gallons of cleaning solution through this chiller. Then running some clear water through the wort chiller. After done, dry the chiller before storage..
  • [Can Work With Water Pump]: The wort-in port of the chiller connect your mash tun, the wort-out port connect your fermenter, the wort can be transferred by a wort pump. One side of the water hose connects to your water tap and the other side connects to the water-in port of our plate chiller. Using another hose to connect the water-out port of the chiller to remove the warm water..
  • [Multifunctional Usage]: Using for cooling wort/beer/water. It's perfect to use in the lab, for beer brewing, or for any application that requires the exchange of heat between two fluids. Please install a filter for the ....
Check Stock

110V Magnetic Home Brewing System Beer Pump, Food Grade Stainless Steel Head with 1/2'' NPT Thread, Advanced High Temperature Resistance System Pump (Stainless Steel Head)

  • with 19 LPM (5 GPM) max flow rate, our beer pump can lift max 3.4 m (10 ft)..
  • No Leak, Good Sealing — Pump shaft is a closed static seal, Splash proof, Greatly avoiding liquid leakage and Achieving excellent sealing, Easier to prime, Amazing liquid circulation beer pump.
  • The liquid travels from the bottom of the valve into the pump, and once device is powered on (plugged in to outlet), the propeller circulates liquid for maximum flow.
  • Specifications — 1/2 inch Inlet & Outlet.
  • Food Grade Stainless Steel — Magnetic pump head with 1/2 inch Thread is made of Food grade 304 stainless steel, High resistance to corrosion, Not easy to get rust, Non-toxic, Environmentally friendly, Lifetime-Using brewing pump.
  • No Noise, Quiet Operation — Main shaft is separated from the impeller, with damping and anti-Vibration function, Reducing the influence of motor vibration on the pump, Low power consumption, High efficiency,Run smoothly, Excellent Repeatable magnetic pump.
  • Easy to Use — Prime by running liquid through pump prior to turning on.
  • Use to dispense beer, treat water, transfer hot water from your kettle to a mash tun, or recirculate mash wort and sparge and transfer to a brew kettle.
Check Stock

BACOENG Stainless Steel 115 Volt Inline Home Brewing System Beer Pump, 55” Cord WITH Plug, Inlet 1/2” x Outlet 1/2” MPT

  • SPECIFICATIONS: 1/2inch MPT Inlet&Outlet.
  • FDA FOOD COMPLIANT - Stainless steel is used in professional setups because it is a durable, food-grade metal that can withstand caustic chemicals and can be effectively sanitized..
  • EASY TO USE: Prime by running liquid through pump prior to turning on.
  • The liquid travels from the bottom of the valve into the pump, and once device is powered on (plugged in to outlet), the propeller circulates liquid for maximum flow.
  • Use to dispense beer, treat water, transfer hot water from your kettle to a mash tun, or recirculate mash wort and sparge and transfer to a brew kettle.
  • MATERIAL PERFORMANCE: Pump extraction medium temperature changes should be controlled within 100℃, high temperature does not exceed 120℃. Shaft bearing adopt special ceramics material which make it characterize strong resistance for abrasion and corrosion..
  • MAGNETIC: Fully sealed pump motor with connecting magnetic shaft and magnetic propeller.
  • Magnetically coupled for enhanced operation.
Check Stock

Northern Brewer Stainless Steel Counterflow Wort Chiller

  • Chill your wort like the professionals do!.
  • A full 18' of contact area for your wort! The tube-within-a-tube design allows for hot wort to flow through the chiller in one direction, while cooling water flows the opposite direction in a cooling jacket surrounding the wort..
  • Threaded Stainless Steel Fittings for ALL Connections (unlike units from other manufacturers). No Brass Connections and No flimsy tubing clamps required..
  • Solidly constructed of 304 grade stainless steel with 1/2" NPT Wort Fittings and Male Garden Hose Threaded Water Fittings..
  • Low Flow Restriction: Gravity feed your wort or use a pump. The choice is yours!.
Check Stock

FERRODAY Magnetic Drive Pump Wort Pump Food Grade High Temperature Stainless Head Magnetic Pump 15RM with 1/2"NPT thread Home Brew

  • 【Solid Magnetic Pump】 : Fully-sealed magnetic pump, motor with connecting the magnetic shaft and magnetic propeller, all magnetically coupled for enhanced operation. This is a High output volume and quiet operation industrial/ home brew equipment. Great heat resistant up to 120℃/ 248℉..
  • 【Safely Transfer Liquid】 : Transferring liquids is an important part of any brew operation, and the most easy and safe way to transferring liquids is to attach this magnetic pump, the propeller will magnetically circulates liquids for you. Please note: Moving giant vessel with hot wort yourself is not safe..
  • 【Life Time Service】We are committed to offer you high quality product as well as superior service! Please feel free to tell us if any problems, we would try our best to satisfy you. Lifetime technical support..
  • Perfect for transferring and circulation..
  • 【Quiet and Efficient】 : The pump’s main shaft is separated from the impeller, which has damping and anti-Vibration function, aim to reducing the influence of motor vibration on the pump. Realized a high efficiency smooth running, and excellent quiet circulation..
  • 【Easy to Use】 : Prime by running liquid through the pump prior to turning it on.
  •  The liquid travels from the bottom of the valv....
Check Stock

ProMaker Home Brewing Stainless Steel Diffusion Stone Inline oxygenation Aeration Aerator Kit Oxygenation Diffuser for Wort Chiller Kettle Pump Beer Brewing Stone Kit

  • 【High Quality】:Stainless Steel 2 micron diffusion stone and parts make it more durable and keep beer fresh taste.
  • 【Aeration and Oxygenation Kit】:1/2'' MPT Homebrew Inline Aeration/Oxygenation Diffusion Stone with barb fitting,full Kit comes ready to assemble to your equipment.
  • 【 Brewing Tools】Oxygenate wort thoroughly to insure a healthy fermentation and carbonate quickly,connects inline with third fitting connected to your oxygen regulator. The oxygen stone will aerate your wort as they flow through..
  • 【Simple Assembly】:1/4" barb inlet for oxygen regulator or air pump connection,1/2" Hose barbs for beer flow,it can connects inline with any Kettle, Pump, or counterflow/plate wort chiller.
  • 【Package Include】:1* Stainless Diffusion stone + 1*Stainless tee fiting + 2*Hose barb Fitting.
Check Stock

ZAOJIAO DC 12V Home Brew Little Pump, Solar Hot Water Circulation Brushless Pump 780L/H 206GPH 5M/16ft Low Noise + 10ft Silicone Tubing Food Grade + ETL Listed DC Power Supply Adapter

  • Max lift height: 5m (16ft). 1/2″ Male thread on the pump, the brass hose fittings comes with the pump, the OD of the brass coupler is 3/8”(10mm). Plug type: 2.1mm x 5.5mm female. Entirely waterproof, super long working life (more than 30,000 hours). Brushless Motor, small size, high efficiency, low consumption, low noise..
  • ★ Wildly used for home brewing, beer making, recirculating wort, transfer water, hot water circulating, etc. Perfect home brew pump!.
  • ★ Silicone Tubing Size. The inside diameter(ID): 10mm(3/8 inch), the outside diameter(OD): 13mm(1/2 inch). The thickness of tube is 1.5mm. Length: 10 ft. Food grade, soft, flexible and durable..
  • ★ ETL Certified power supply adapter, safety guarantee. Power source: DC 12V, rated current: 2A. The point straight in line with the pump body is the water inlet, vertical to the pump body is water outlet..
  • ★ Circulation pump is non-self-priming pump. Max circulating water temperature: 80℃/176°F, it’s submersible but can’t be immersed in hot water.
  • ★ Package includes: 1 x Water pump, 1 x AC 110V- 240V to DC 12V 2A Power Supply Adapter, 1x 10 ft Silicone Tubing, 2 x Brass hose fittings, 2x Hose Clamps..
Check Stock

Silicone Tubing, 8mm ID x 10mm OD High Temp Food Grade Flexible Pure Silicone Water Air Hose for Brewing Wine Making Pump Transfer (10FT)

  • High quality flexible pure silicone tubing compound in compliance with FDA and 3A Sanitary Standards..
  • The inside diameter(ID): 8mm, the outside diameter(OD): 10mm. The thickness of tube is 1mm. Length: 10 ft.
  • High temperature silicone tube can work under -50°C to 200°C (-58°F to 392°F), such as boil temps, boiling wort, hot water, etc..
  • Crystal-clear tubing provides excellent resistance to chemicals, solvents, alkalis, and acids. Smooth inner surface for easy flow and easy cleaning. BPA Free and non-toxic..
  • Silicone tubing in Platinum cured translucent is designed for a variety of pump and transfer applications including pharmaceutical, laboratory, bioprocess manufacturing and food and beverage applications..
Check Stock

ProMaker Home Brewing Stainless Steel 2 Micron Inline Oxygenation Diffusion Stone Aeration Stone 1/2 NPT Carbonation Stone to Barb Fitting Stone

  • ◆ TOP QUALITY -- Made of 316 stainless steel,anti-corrosion, high temperature resistant and durable.
  • ◆ NO BLOCKING -- Millions of tiny pores make it can carbonation beer and soda prior to fermentation quickly,the micron stone is ideal to force carbonate your kegged beer or as an aeration stone prior to fermentation.Not easy to get clogged as long as it's ungreasy.
  • ◆ A MUST HAVE -- A must have for Homebrewers who Carbonate in Kegs Made of stainless steel 316, better than stainless 304. Perfect for carbonation of Beer or Soda..
  • ◆ EASY TO USE--Just connect your oxygen regulator or aeration pump to the stainless steel diffusion stone and aerate your wort as beer flows through the line. Connects inline with any kettle, pump, or counterflow/plate wort chiller.
  • ◆ MONEY BACK GUARANTEE - Your happiness is our priority. As such, if you aren't satisfied with your purchase, contact us within thirty days, and we'll issue you a full refund.
Check Stock