Reviews Wort Chiller

FERRODAY Wort Chiller 30 Plate 1/2 NPT Plate Chiller Stainless Steel Brazed Plate Heat Exchanger 1/2 Thread Plate Chiller - 7.3' x 2.8'

  • [Durable Material]: This wort chiller is made of 304 stainless steel plates with 99.9% copper brazed. Using this plate chiller can reduce oxidation in your homebrew heat exchange..
  • [Quickly Chilling Beer Wort]: This compact heat exchanger is designed for chilling your beer/ wort/water. Compared with the immersion chiller, our heat exchanger has 30 brazed plates and cools wort within minutes rather than several hours..
  • [Easy To Clean Out]: The heat exchanger can't be dissembled to clean. So firstly you can run 5 gallons of cleaning solution through this chiller. Then running some clear water through the wort chiller. After done, dry the chiller before storage..
  • [Can Work With Water Pump]: The wort-in port of the chiller connect your mash tun, the wort-out port connect your fermenter, the wort can be transferred by a wort pump. One side of the water hose connects to your water tap and the other side connects to the water-in port of our plate chiller. Using another hose to connect the water-out port of the chiller to remove the warm water..
  • [Multifunctional Usage]: Using for cooling wort/beer/water. It's perfect to use in the lab, for beer brewing, or for any application that requires the exchange of heat between two fluids. Please install a filter for the ....
Check Stock

Coldbreak Homebrew 6-11 Gallon Batch Copper Immersion Wort Chiller, Large, 3/8” x 60' Pure Copper, Leak Free Compression Barbs, Tubing and Garden Hose Fitting, USA Made

  • No wort clogging and save cost while ensuring high cooling efficiency: Compared to plate chiller, this counterflow wort chiller has a wider wort cooling area, the tube wall is thin enough, don't need to make whirlpool, no clogging, cooling efficiency can be comparable to the 60-plate wort chiller.
  • works with the principle of gravity caused by position difference, don't need pump driving, don’t need to buy hose connector fittings separately, which will reduce your wort cooling costs perfectly!.
  • Used outside the mash tun and reduce brewing taste damage: Compared to the immersion type, this counterflow wort chiller has much less risk of getting any wild yeast into the pot to damage wort taste since it is used outside the brewing kettle, won't interfere hop additions, don't need to worry about the surface oil occurring, smaller size for easy storage, chills beer fastly since chilling and transfer to the fermenter are done simultaneously, uses less water!.
  • Faster and less hassle than making an ice bath for your wort: With this counterflow hot liquid accelerated cooler, no more filling the sink with ice water and having to replace ice several times, no more long waiting hours to get to proper temperature cooling your wort, only several mins to get to ....
Check Stock

YUEWO 26 ft Copper Immersion Wort Chiller Coil Homebrew for Beer Brewing with Vinyl Tubing Garden Hose Fitting

  • High Efficient & Easy to Clean - This immersion wort chiller used for cooling beer or malt. The beer wort chiller transfers heat more efficiently and is easy to clean..
  • High performance & Quick Cooling - The home brew wort cooler cools the wort down to a temperature where you can add beer yeast, which is part of what turns the wort into delicious beer. It has reliable performance and quick wort cooling process. Our wort chillers are up to the task whether it's winter or summer..
  • Package includes a garden hose connection, so you can brew outside, you can also connects to a laundry sink faucet as your chilling water source..
  • Dimension - 3.94inch x 7.87inch x 13.78inch/10cm x 20cm x 25cm(coil diameter x coil height x inlet height) copper immersion wort chiller, 2 pcs 1.5m/4.92feet vinyl tubing..
  • Package List - Package includes home brew wort chiller, 2 pcs vinyl tubing, one garden hose fitting and 2 hose clamps..
Check Stock

Dbgogo Counterflow Wort Chiller, 32.8’ Homebrew Stainless Steel Heat Exchanger Hot Liquid Accelerated Cooler for Brewing Kettle Mash Tun

  • High Efficient & Easy to Clean - This immersion wort chiller used for cooling beer or malt. The beer wort chiller transfers heat more efficiently and is easy to clean..
  • High performance & Quick Cooling - The home brew wort cooler cools the wort down to a temperature where you can add beer yeast, which is part of what turns the wort into delicious beer. It has reliable performance and quick wort cooling process. Our wort chillers are up to the task whether it's winter or summer..
  • Package includes a garden hose connection, so you can brew outside, you can also connects to a laundry sink faucet as your chilling water source..
  • Dimension - 3.94inch x 7.87inch x 13.78inch/10cm x 20cm x 25cm(coil diameter x coil height x inlet height) copper immersion wort chiller, 2 pcs 1.5m/4.92feet vinyl tubing..
  • Package List - Package includes home brew wort chiller, 2 pcs vinyl tubing, one garden hose fitting and 2 hose clamps..
Check Stock

NY Brew Supply - COMINHKPR96442 Stainless Wort Chiller with Garden Hose Fittings, 1/2\ x 50', Silver (AZ-W1250-SG)

  • Wort Chiller: Stainless Steel Beer Cooling Coil Suitable for connection to water circuit for even faster cooling..
  • Beer Brewing Wort Chillers: This cool the cooked wort quickly. Let the wort reach your preferred temperature for Yeast inoculation..
  • Stainless Steel Wort Chiller Coil: The beer chiller is made up of stainless steel material, durable and solid for use..
  • Beer Cooling Coil Pipe: Diameter size about 9.52mm, thickness size about 0.6mm, length size about 8.8m..
  • This Domestic Beer Cooler is used to cool beer or malt. The wort can be boiled completely after 15 minutes..
Check Stock

MRbrew Homebrew Magnetic Beer Pump Commercial Stainless Steel 1/2’’ NPT Thread Head Quiet Circulation Operation Excellent High Temperature Resistance System Wort Brewing Pump

  • ...ransferring speed in a more reasonable manner, save time and effort, save cost..
  • 【High End Stainless Steel】This magnetic wort brewing pump features a 1/2 inch male NPT thread head, which is made of commercial grade 304 stainless steel and can be connected to 1/2'' female thread quick disconnect working with wort chiller to increase wort cooling rate, high resistance to wear and tear, not easy to get rust, durable beer wort pump brings a healthy brewing life..
  • 【No Leak, Good Sealing】This wort brewing circulation pump has a closed static sealing shaft, the brewing pump thread is cut well and will fit brewing tools perfectly, which will greatly achieve excellent sealing and avoid wort beer liquid leakage, this amazing liquid circulation beer pump is easier to make wort transferred to the brewing mash tun faster and efficiently..
  • 【Increase wort transferring rate efficiently】MRbrew 1/2" male NPT thread fitting wort brewing pump has a tremendously low restriction, which makes it ideal for working with plate wort chiller or immersion wort chiller to do gravity transferring, improves wort transferring speed, allow for more mounting options and add the ultimate flexibility during brew day, excellent repeatable-using brewing wort pump runs smoothly an....
Check Stock

Northern Brewer - Copperhead Copper Immersion Wort Chiller for Beer Brewing

  • The copper brother to our customer favorite Silver Serpent, the sleek Copperhead 25-foot copper immersion wort chiller is the fast way to cool your wort to pitching temps!.
  • Simply drop your clean chiller into the kettle a few minutes before the end of the boil and it will be ready to go..
  • Brew with peace of mind like never before. Drop-angle connections keep surprise leaks outside your kettle and away from cooling wort..
  • Standard garden hose connection allows for brewing outside or connects to a laundry sink faucet as your chilling water source..
  • Comes fully assembled with tubing, barbed fittings, and hose clamps..
Check Stock

NY Brew Supply Copper Wort Chiller Medium

  • This Immersion Chiller is Designed for 5 Gallon Batches, and Will Cool Your Wort in Minutes, High Quality Brass Garden Hose Fittings Are Attached to....
  • An Instruction Sheet is Included With Information on How to Use and Care for Your Wort Chiller.
Check Stock

Super Efficient 3/8\ x 25' Stainless Steel Wort Chiller w/ GH Fittings

  • - This wort chiller is used for cooling beer or malt..
  • - Complete disinfection can be achieved after 15 minutes wort boiling..
  • - This cool the cooked wort quickly. Let the wort reach your preferred temperature for Yeast inoculation ..
Check Stock

Northern Brewer Stainless Steel Counterflow Wort Chiller

  • Chill your wort like the professionals do!.
  • A full 18' of contact area for your wort! The tube-within-a-tube design allows for hot wort to flow through the chiller in one direction, while cooling water flows the opposite direction in a cooling jacket surrounding the wort..
  • Threaded Stainless Steel Fittings for ALL Connections (unlike units from other manufacturers). No Brass Connections and No flimsy tubing clamps required..
  • Solidly constructed of 304 grade stainless steel with 1/2" NPT Wort Fittings and Male Garden Hose Threaded Water Fittings..
  • Low Flow Restriction: Gravity feed your wort or use a pump. The choice is yours!.
Check Stock

Super Efficient 3/8\ x 25' Stainless Steel Wort Chiller

  • Perfect for the kitchen homebrewer that is making extract batches. Typically, with extract batches you boil a smaller amount of concentrated wort (1-3 gallons) and then add clean cool water before adding the yeast..
  • The compact 15' copper immersion chiller is the perfect size for these batches and easily connects to your kitchen sink with a sink adapter (not included)..
  • Made in the USA (Michigan) from pure 3/8” copper tubing..
  • Leak free compression barbs keep your immersion chiller from leaking back into your wort during the chilling process..
  • Vinyl tubing comes assembled with (2) 4’ lengths, or 8 feet total..
  • The inlet has a standard heavy duty female garden hose fitting, also made in the USA..
  • 6.75" x 3" x 14" (coil diameter x coil height x inlet height).
Check Stock

Northern Brewer Deluxe Homebrew Starter Kit, Equipment and 5 Gallon Recipe (Fresh Squished IPA)

  • A 30' wort chiller is the perfect size if you are making full boil extract kits or making smaller all grain batches (3-6 gallons)..
  • Made in the USA (Michigan) from pure 3/8” copper tubing..
  • Leak free compression barbs keep your immersion chiller from leaking back into your wort during the chilling process..
  • Vinyl tubing comes assembled with (2) 4’ lengths, or 8 feet total..
  • The inlet has a standard heavy duty female garden hose fitting, also made in the USA..
  • It can easily connect to your kitchen sink with a sink adapter (not included).
  • 9" x 4.25" 18" (coil diameter x coil height x inlet height.
Check Stock

Stainless Steel Beer Cooling Coil, Home Brewing Immersion Wort Chiller Pipe Bar Wine Making Machine Part 8.8M Cooling Coil Pipe(Silver)

  • A 60' wort chiller is the perfect size for all grain brewers making 6-11 gallon batches..
  • Made in the USA (Michigan) from pure 3/8” copper tubing..
  • Leak free compression barbs keep your immersion chiller from leaking back into your wort during the chilling process..
  • Vinyl tubing comes assembled with (2) 4’ lengths, or 8 feet total..
  • The inlet has a standard heavy duty female garden hose fitting, also made in the USA..
  • It can easily connect to your kitchen sink with a sink adapter (not included).
  • 9" x 9.5" x 20" (coil diameter x coil height x inlet height).
Check Stock