Reviews Worm Shaft System

JET CS-315, 12-Inch Ferrous Manual Cold Saw, 230V 3PH, 2HP (414227)

  • LONG BLADE LIFE: Flood coolant system with a 1-1/3 gallon reservoir and pump with flow control system..
  • REPEAT CUTS: Fully-adjustable material depth stop for sawing repeatability and increased production..
  • POWERFUL: Hardened and ground direct-drive worm shaft and bronze worm wheel transmits maximum torque to saw blade..
  • SOLID CONSTRUCTION: Heavy-duty cast iron frame base with easy access storage, provides a stable cutting platform..
  • ADDED SAFETY: Two-piece cast iron blade guard system permits quick and easy blade changes without removing the guards..
Check Stock

Jet Tools CS-315, 315mm 1-Phase Ferrous Manual Cold Saw (414229), Standard

  • DURABILITY: Blade drive reduction gearbox operates in an oil bath..
  • FLOOD COOLANT SYSTEM: 1-1/3 gallon coolant reservoir and pump with flow control system extends blade life..
  • REPEAT CUTS: Fully-adjustable material depth stop for sawing repeatability and increased production..
  • MAXIMUM TORQUE: Hardened and ground direct-drive worm shaft, and bronze worm wheel, transmits maximum torque to the saw blade..
  • BURR-FREE CUTTING: Quick-clamping cam-action vise with adjustable gib and material support bar..
Check Stock

Worm Gear Set, 20: 1 Bronze Worm Gear Wheel and Metal Shaft, High Torsion Worm Gear Replace for 4:1, Industrial Robot Parts for DIY Project

  • INDUSTRIAL ROBOT SPARE PARTS: The worm drive has a simple, compact, small size and light weight. Simple structure, easy installation and disassembly..
  • WORM GEAR: If you need more torque or slower output speed, it can be used to replace the 4:1 worm gear that comes standard with the worm gear box. Again, this unit reduces backdrive to almost zero..
  • NOTE: The worm gear is mounted on a 4.7mm D-shaft diameter. The worm is mounted on a 6mm or 4.7mm diameter D-shaft..
  • HIGH QUALITY MATERIAL: The worm is made of metal, and the worm wheel is made of bronze, which has impact resistance, high temperature resistance, corrosion resistance and long service life..
  • PARAMETERS: The gear ratio is 20:1, which is suitable for building industrial robots with various functional shapes..
Check Stock

CNBTR 0.5 Modulus Brass Metal Speed Reducer with 60 T Wheel 5mm Bore Gear Shaft

  • [Product Type] Size 1: Brass Gear Wheel: 0.5 Modulus, 60T, Hole Diameter: 6mm/0.24inch, Gear: 31x12mm/1.22x0.47inch (DxH). Size 2: Brass Gear Shaft: 0.5 Modulus, Hole Diameter: 5mm/0.2inch, Overall Length: 20mm/0.79inch..
  • [Material] Made of brass material, not easy to wear, durable and lasting performance. This gear wheel & shaft are the excellent industrial replacement accessory..
  • [Function] The transmission structure of gear shaft is simple, compact, small volume and light weight. Easy to install and use..
  • [Package] The item contains one 0.5 modulus brass worm gear shaft and one 60T brass worm gear wheel..
  • If you have any question about the product, feel free to contact the CNBTR Service and we will try our best to give you a satisfactory answer..
Check Stock

OEMTOOLS 24831 3/4 Ton Engine Leveler

  • 4 Point Mounting System Provides Maximum Control.
  • 3 Chain Positions to Accommodate Different Engine Configurations.
  • Smooth Operating Worm Drive Shaft for Easy Level Adjustment.
Check Stock

CNBTR 4mm Bore Hole Diameter Brass Gear Shaft with 60 T Wheel 0.5 Modulus Set Drive Gear Box Shaft

  • Set include one 0.5 modulus 4MM Hole Dia brass gear shaft and one 60 T brass worm gear wheel..
  • The transmission structure of worm shaft is simple, compact, small volume and light weight..
  • Shaft Z1=1, turn a round of gear T, can get a large transmission ratio, generally in the power transmission, the transmission ratio I=10-80, like big transmission ratio, if use with gear transmission, will need to take the multi-stage transmission..
  • High quality material selection, carefully processing create high quality product..
Check Stock

Cloudray Mechanical Parts Set Inner Sliding Rails 1300x900 Single Head For CO2 Laser engraver Engraving Cutting Machine

  • Application size: Stepper motor 8mm to 11mm bore adapter.
  • Turbine reducer shaft sleeve 8mm to 11mm bore adapter for worm gear reducer shaft sleeve.
Check Stock

Magisale Garage Door Parts Bracket Adjustable Reinforcement Bracket, Carbon Steel Zinc Plated

  • VIRTIONZ replacement Gear & Sprocket Kit for LiftMaster Sears Craftsman 41C4220A, 41A2817 Garage Door.
  • Specs - Large Gear: 2 3/4" x 1/2" with 1/2" bore. Worm Gear: 1 1/8" Outside Diameter with 1 1/4" wide teeth..
  • Includes - (1) Gear & Sprocket Kit with Worm Gear, Grease, Motor Shaft Bearings, Sprocket Bearings & Hardware.
  • If your garage door opener is a 1/2 HP or 1/3 HP chain drive model with a production date of 1984 to present, this kit will be compatible.
  • Do NOT use for garage openers with dual sprockets on the output shaft.
Check Stock

Powerbuilt Engine Leveler with Handle, 1500 Pound. 3/4 Ton Capacity, Four Point Mounting System, Adjust Engine Tilt - 640470

  • Balances or tilts engine/transmission for easier install/removal.
  • Four point mounting system for maximum control.
  • Precision four point mounting system gives you maximum control.
  • Built-in swivel handle lets you adjust the tilt of the engine as you raise or lower it.
  • Worm shaft rotates using built-in swivel handle.
Check Stock

LiftMaster Gear and Sprocket Assembly 41A5658 - G2595

  • The ROP Shop replacement Gear & Sprocket Kit for LiftMaster 1245LK, 1250, 1255, 1255R, 1260 Garage Doors.
  • Specs - Large Gear: 2 3/4" x 1/2" with 1/2" bore. Worm Gear: 1 1/8" Outside Diameter with 1 1/4" wide teeth. Refer to images 2 & 3 for more information.
  • Includes - (1) Gear & Sprocket Kit with Worm Gear, Grease, Motor Shaft Bearings, Sprocket Bearings & Hardware.
  • Compatible with Residential Chamberlain, Liftmaster, Sears Craftsman, Master Mechanic and Garage Master, 1/2, 1/3, 3/4 HP chain drive models manufactured 1984 to present.
  • Do NOT use for garage openers with dual sprockets on the output shaft.
  • Not compatible with Sears openers made before 1984 - body color of powerhead unit: brown, green, or yellow.
Check Stock

Gear and Sprocket Replacement Kit for Liftmaster 41c4220a, fits Chamberlain, Sears, Craftsman 1/3 and 1/2 HP Chain Drive Models (Chain Drive Gear and Sprocket Kit)

  • Kit Includes: Gear and sprocket, worm gear, grease, motor shaft bearings, sprocket bearings..
  • Compatible with Chamberlain, Sears, Craftsman and LiftMaster 1/3 and 1/2 HP chain drive models..
  • Compatible with chain drive Chamberlain Sears Craftsman manufactured operators 1984-current..
  • Installation: Step-by-step instructions included, free tech support available. This OEM kit 041c4220a includes all of the 41A2817 Drive / Worm Gear kit, and is easier to install because you do not have to disassemble the output shaft assembly - the spur gear is already mounted on the new output shaft..
Check Stock

Grizzly Industrial T28173-14\ x 78\ Heavy-Duty Roller Table with Work Stop

  • The table top can be adjusted by 360° rotation.
  • Countertop 360° scribing for easy reading.
  • Precision shafting design, adjustable shaft clearance and good stability.
  • Finished worm gear drive with large reduction ratio and high precision.
  • The air-back structure ensures that the worm and the worm are fully meshed, reducing the movement of the table.
  • The upper and lower sides have standard hole spacing connection holes, which are convenient to connect with other stages to form a multi-dimensional mobile station..
Check Stock

Greartisan DC 12V 35RPM Turbo Worm Geared Motor High Torque Turbine Worm Gear Box Reduction Motor 6mm Shaft JSX255-370

  • ALL-METAL GEARS: High-temperature resistance, high abrasion resistance, strong load capacity, sturdy and durable, effectively protect the turbo worm gear box motor body..
  • PURE COPPER WIRE CORE ROTOR: With precision winding technology, the turbo worm geared motor power instant increased by 30%..
  • D SHAPED OUTPUT SHAFT: Using high hardness steel, good toughness, impact resistance, the quality of the bearing and the service life of the turbo worm gear motor are improved, extremely durable..
  • GEAR DC MOTOR with MICRO-TURBINE WORM: You can change the wiring-connection to change motor rotation. Low noise and high torque..
  • RELIABLE GURANTEE: Any quality issues, we promise 100% unconditional return service. If you need other voltage and rpm, please feel free to contact us!.
Check Stock