Reviews Worm Gear Slewing Ring

Worm Gear Set, 20: 1 Bronze Worm Gear Wheel and Metal Shaft, High Torsion Worm Gear Replace for 4:1, Industrial Robot Parts for DIY Project

  • INDUSTRIAL ROBOT SPARE PARTS: The worm drive has a simple, compact, small size and light weight. Simple structure, easy installation and disassembly..
  • WORM GEAR: If you need more torque or slower output speed, it can be used to replace the 4:1 worm gear that comes standard with the worm gear box. Again, this unit reduces backdrive to almost zero..
  • NOTE: The worm gear is mounted on a 4.7mm D-shaft diameter. The worm is mounted on a 6mm or 4.7mm diameter D-shaft..
  • HIGH QUALITY MATERIAL: The worm is made of metal, and the worm wheel is made of bronze, which has impact resistance, high temperature resistance, corrosion resistance and long service life..
  • PARAMETERS: The gear ratio is 20:1, which is suitable for building industrial robots with various functional shapes..
Check Stock

Liftmaster/Chamberlain- Sears/Craftsman 41a4885-2 Genuine Replacement Part Gear and Sprocket Kit, DC Belt

  • Liftmaster 41A4885-2 Belt Drive Gear and Drive Pully Set.
  • Includes:Drive shaft with belt pulley,spring washer, and.
  • thrust washer, retaining ring, bearing plate, and.
  • roll pins (2), drive gear, worm gear, helical gear with retainer, grease,installation instructions..
  • For BELT DRIVE Units only Manufactured 1984-2001..
Check Stock

WYKA 10 Pack 25-45mm Heavy Duty Upgrade T-bolt Clamps 304 Stainless Steel Tension Pipe Clamps Worm Hose Clamp for Air Ducting Fuel Line Automotive Mechanical

  • 【High Quality】---This Worm Gear Hose Clamp Made of 304 stainless steel, and it is not easy to slip, stable and durable, anti-oxidation, high sealing..
  • 【Reusable】---This Worm Gear Hose Clamp can easily adjust the applicable size, turn the screw, and can be disassembled and used repeatedly..
  • 【Ingenious Design】---This Worm Gear Hose Clamp is ingeniously designed, no need to lock the holes, with gaskets, and exquisite processing..
  • 【Widely Used】---This Worm Gear Hose Clamp has excellent corrosion resistance and can be used in various environments. Salt-resistant, anti-rust, anti-corrosion, waterproof, and oil-proof..
  • 【A Variety of Sizes】---Worm Gear Hose Clamp has various specifications and good shock resistance. Please choose the size that suits you before buying..
Check Stock

JTGBBD3 Heavy Duty Aluminum Lazy Susan Ball Bearing 6in 8in 18in 24in 32in, 360 Degree Rotating Swivel Plate, Quiet Lazy Susan Hardware Turntable Bearing (Size : 28 inches (700mm))

  • ❉ The silent slewing bearing adopts heavy-duty aluminum alloy materials and solid steel balls with strong load-bearing capacity.
  • ❉ The slewing ring runs smoothly and flexibly. Suitable for all types of table plates and table tops.
  • ❉ Turntable bearing, built-in mute bar, mute, stable rotation, easy to use.
  • ❉ The bearings are equipped with non-slip rubber feet. Non-slip, wear-resistant, stable.
  • ❉ The rotating base is easy to install, just fix the screws in the required position to complete the installation.
Check Stock

GREEN FABWOOD 75 Type Plastic Crown Gear Single Double Reduction Gear Worm Gear (Original Version)

  • 75 Type Plastic Crown Gear Single Double Reduction Gear Worm Gear Description: Material: plastic Type: spindle gear, crown gear, single gear, double gear, worn gear, bevel gear, belt pulley, belt, connecting rack, axle sleeve, tee collar Quantity: 75 Feature: 75 type ideal for DIY science and small production, product design and mechanical model Package included: 19X Double Reduction Gear(each one) 12X Single Reduction Gear(each on) 11X Crow Gear(each one) 2x Worm Gear(each one) 9X Spindle Gear(each one) 7X Belt Pulley(each one) 6X Axle Sleeve(each one) 5X Belt(each one) 2X Connection Rack(each one) 1X Tee Collar.
Check Stock

Greartisan DC 12V 35RPM Turbo Worm Geared Motor High Torque Turbine Worm Gear Box Reduction Motor 6mm Shaft JSX255-370

  • ALL-METAL GEARS: High-temperature resistance, high abrasion resistance, strong load capacity, sturdy and durable, effectively protect the turbo worm gear box motor body..
  • PURE COPPER WIRE CORE ROTOR: With precision winding technology, the turbo worm geared motor power instant increased by 30%..
  • D SHAPED OUTPUT SHAFT: Using high hardness steel, good toughness, impact resistance, the quality of the bearing and the service life of the turbo worm gear motor are improved, extremely durable..
  • GEAR DC MOTOR with MICRO-TURBINE WORM: You can change the wiring-connection to change motor rotation. Low noise and high torque..
  • RELIABLE GURANTEE: Any quality issues, we promise 100% unconditional return service. If you need other voltage and rpm, please feel free to contact us!.
Check Stock

Wayborn 9096W Ladder Style White TV Stand, 22 x 49 x 9 in.

  • Our turntable is made of sturdy aluminum alloy material, which is sturdy and durable. Easy to clean..
  • Our slewing bearings have a variety of sizes for you to choose from: 20cm, 25cm, 30cm, 35cm, 40cm, 45cm, 50cm, 60cm, 68cm, 80cm, all the detailed dimensions are shown in the figure..
  • Silent level design: there is a 3MM height difference between the inner ring and the outer ring, equipped with a precision muffler bar, which is quieter and more flexible.
  • Wide range of applications: suitable for cake decoration, TV monitor stand, electronic repair, sculpture base, catering service, food display, service..
  • Note: If your turntable cannot rotate freely, you can try to apply some lubricant and synthetic spray lubricant to the side hole and the gap between the outer ring and the inner ring.
Check Stock

Penck 12 Pack 3/4 Inch Hose Clamps Stainless Steel Clamps Worm-Gear Hose Clamp Miniature Power-Seal Worm-Drive Kit 13-19mm Range

  • 304 Stainless steel worm gear clamp consists of a stainless steel band, housing, and screw..
  • They can adjust the miniature size for fitting small hoses. A worm gear mechanism adjusts the clamp's diameter to precisely apply sealing pressure..
  • The slotted screw allows installation using a blade screwdriver, nut driver, or socket wrench. Hose clamps attach hoses to fittings to prevent flow leakage. They come in a variety of designs and distribute uniform pressure over the circumference of hoses to bind them to fittings..
  • Worm Gear Hose Clamps are flexible and ductile with wide adjustable size about 1/2'' - 3/4'' (13-19mm). Fit for hose outside diameter 1/2'' - 3/4'' (13-19mm)..
  • You Can Adjust The Size According To Demand, Worm Friction Is Small, Lock Secure And Tight..
Check Stock

Magisale Garage Door Parts Bracket Adjustable Reinforcement Bracket, Carbon Steel Zinc Plated

  • VIRTIONZ replacement Gear & Sprocket Kit for LiftMaster Sears Craftsman 41C4220A, 41A2817 Garage Door.
  • Specs - Large Gear: 2 3/4" x 1/2" with 1/2" bore. Worm Gear: 1 1/8" Outside Diameter with 1 1/4" wide teeth..
  • Includes - (1) Gear & Sprocket Kit with Worm Gear, Grease, Motor Shaft Bearings, Sprocket Bearings & Hardware.
  • If your garage door opener is a 1/2 HP or 1/3 HP chain drive model with a production date of 1984 to present, this kit will be compatible.
  • Do NOT use for garage openers with dual sprockets on the output shaft.
Check Stock

Plastic Gears Set Pulley Belt Worm Kits Crown Gear Set Robot Motor Toy DIY Parts for Model Amateur(64 new gear packs)

  • Worm and worm gear Coincide distance from the center distance is 8 mm.
  • 1pairs x 0.5 Modulus Small Reduction Ratio of 1:10 Motor Output Copper Worm Wheel Gear For DIY.
Check Stock

LiftMaster Gear and Sprocket Assembly 41A5658 - G2595

  • The ROP Shop replacement Gear & Sprocket Kit for LiftMaster 1245LK, 1250, 1255, 1255R, 1260 Garage Doors.
  • Specs - Large Gear: 2 3/4" x 1/2" with 1/2" bore. Worm Gear: 1 1/8" Outside Diameter with 1 1/4" wide teeth. Refer to images 2 & 3 for more information.
  • Includes - (1) Gear & Sprocket Kit with Worm Gear, Grease, Motor Shaft Bearings, Sprocket Bearings & Hardware.
  • Compatible with Residential Chamberlain, Liftmaster, Sears Craftsman, Master Mechanic and Garage Master, 1/2, 1/3, 3/4 HP chain drive models manufactured 1984 to present.
  • Do NOT use for garage openers with dual sprockets on the output shaft.
  • Not compatible with Sears openers made before 1984 - body color of powerhead unit: brown, green, or yellow.
Check Stock

CNBTR 0.5 Modulus Brass Metal Speed Reducer with 60 T Wheel 5mm Bore Gear Shaft

  • [Product Type] Size 1: Brass Gear Wheel: 0.5 Modulus, 60T, Hole Diameter: 6mm/0.24inch, Gear: 31x12mm/1.22x0.47inch (DxH). Size 2: Brass Gear Shaft: 0.5 Modulus, Hole Diameter: 5mm/0.2inch, Overall Length: 20mm/0.79inch..
  • [Material] Made of brass material, not easy to wear, durable and lasting performance. This gear wheel & shaft are the excellent industrial replacement accessory..
  • [Function] The transmission structure of gear shaft is simple, compact, small volume and light weight. Easy to install and use..
  • [Package] The item contains one 0.5 modulus brass worm gear shaft and one 60T brass worm gear wheel..
  • If you have any question about the product, feel free to contact the CNBTR Service and we will try our best to give you a satisfactory answer..
Check Stock

Garage Door Replacement Parts Gear for Linear Moore-O-Matic XX150, X150X-S

  • Genie Garage Opener Drive Worm Gear - Part # 27090A Genie garage door opener is a replacement drive worm gear..
Check Stock