Reviews Working Center

KEWAYO Combined Center Drill Bit Set, 7Pcs HSS 60 Degree Countersink Lathe Mill Tooling Set for Wood Metal Alloy

• Widely Applicable: work with lathe machines and most electronic drills to drill holes in Steel, Iron, Alum, Carbon Steel, Brass and other tough material ranging from 170HB up to 200HB.
• Multiple Sizes: 7 Pieces of Plain Center Drill Bits Set Including 1.0 1.5 2.0 2.5 3.0 4.0 5.0 to meet different needs..
• Accurate: A 60-Degree Angle center drill is very useful in drilling accurate center holes, 60-degree countersink holes or starter holes for bigger drill bits in metal-working.
• High Quality: Center drill bit is made of HSS high speed steel, with extremely sharp blade, low consumption and durable with impact resistance, wear resistance..
• SPIRAL FLUTE: Spiral groove helps clear chips and debris away from the bit, decreasing friction and heat for a faster, cooler drilling process. The precision ground surface is corrosion resistance to achieve better using effects and prolong the working life..

Running Errands

• 【FITMENT】Fit For Harley Touring Models 2009-2016. Please check the description part for more details..
• Material: Metal+Aluminum+Stainless steel..
• 【Air Ride Kit】Waterproof,dust-proof (IP)：IP54. Output Voltage：DC-12V. Working Period：15%@100PSI. Maximum Working Voltage：130PSI(9.1KG/c㎡). Maximum current：14A. Pump's Size(L×W×H)：152mm × 88.5mm × 135mm. The Ventilating Flux: [email protected], When under 0PSI, the rate of flow is approx. 36.0L/MIN. (Calculation formula: 1CFM=28.3185 L/MIN)..
• 【NOTE】CAN NOT Fit With The Cross-Under Exhaust Pipes. Before you buy,please check this part to make sure it can fit your motorcycle or not..
• 【PACKAGE INCLUDED】1 Air Ride Suspension Kit+1 Electric Center Stand..

Sendero

• Lids soft open gently, Ideal for supporting the lid to keep it open.
• Force: 18 Lbs(Per Strut), Length (Center-to-Center): 6.89 inch(175 mm), Compressed Length (Center-to-Center): 4.73 inch(120 mm).
• Support opens lids to a maximum angle of 90 degrees. Available working temperature: -10℃~50℃/14℉-122℉.
• Instructions Included, Screws Included. As the installation, just install it as the image shown in the description or the instructions in the package, While if you still have problem, please kindly Click "Ask Seller" Besides Your Order for In-time Assistance.
• We offer 1 YEAR 100% SATISFACTORY WARRANTY, if unfortunately our SOFT OPEN LID GAS STRUT did not work well, please kindly contact us for exchange, refund or return.

Apexstone 100N/22.5lb Gas Struts 15 inch Gas Strut Lift Support Gas Shocks Gas Spring Strut Gas Prop Struts 15 Inch, Set of 2

• FORCE:22.5 Lbs/100 N(Per Strut),LENGTH(Center-to-Center):14.96 inch(380 mm),COMPRESSED LENGTH(Center-to-Center):9.06 inch(230 mm).Bracket Holes’ Size: 8 mm(diameter),8 mm(diameter),10 mm X 8 mm(Length X Width).WORKING TEMPERATURE: -10 ℃ – 40 ℃/14℉-104℉.
• SET OF 2 IN THE PACKAGE:It could hold open 22.5 lb individually or together for around 45lb on any object such as car lid ,trailer,bed,RV under-bed storage, trap door etc.mm(diameter),8 mm(diameter),10 mm X 8 mm(Length X Width).WORKING TEMPERATURE: -10 ℃ – 40 ℃/14℉-104℉.
• HOW TO INSTALL&ADJUST IT:The instructions is NOT included. Just install it as the image shown in the description ,While if you still have problem, please kindly Click “Ask Seller” Besides Your Order for In-time Assistance.
• 100% SATISFACTORY WARRANTY: We offer 1 year 100% satisfactory warranty,if unfortunately our gas strut did not work well ,please kindly contact us for exchange, refund or return.

PAMAGOO C16-06389 C1606389 14 inch Gas Strut 24 lb 107 N Per Prop, Gas Spring Shock Lift for Camper Shell Shock Topper Rear Window Toolbox Cabinet Lid(2 Pack)

• 14in gas spring parameters Interchange Part Number: C1606389, C16-06389, 8196312, SX140P25, SX140P25S10.
• Extended Length (Center-to-Center): 14" (356 mm).
• Compressed Length (Center-to-Center): 8.9" (224 mm).
• Force: 24 Lbs (107 N) Per Strut,2 Pack!!.
• Scope of applicationSuitable for Camper Shell Window, Trunk Topper Window, Tool Box, Toy Chest Box Lid and so on. If use on DIY builds, suitable weight range apply to the lid: 18-26lbs..
• Easy InstallationWe have gas spring installation videos and online service to guide quick installation in minutes. After successful installation, the covers can be lifted easily..
• WHY CHOOSE US? 180,000 times-passed TUV fatigue test. Pamagoo choose special low-temperature-resistant materials, WORKING TEMPERATURE: ❄-40℃~60 ℃/-40℉~140℉.
• Our promise every Pamagoo gas struts has been undertaken with 180,000 times durability test to ensure its service life and smooth working performance, Pamagoo will provide 18 months replacement support to ensure your no-worries using!.

4 Inch Marking Center Finder Stainless Steel Center Scriber Marking Centerline Tool Woodworking Center Gauge Line Scriber Center Finder Ruler for Woodworker Carpenter

• Use tip: it is recommended to use this center finder in conjunction with a 2B pencil, which is very suitable for determining the precise center of the....
• Size detail: the steel scribe tool is measured about 5.7 x 0.2 x 0.07 inch, small and compact design is very suitable for finding the center of the....
• Material: the center finder tool is made of stainless steel, which is sturdy, reliable, labor-saving, with high measurement accuracy, easy to operate,....
• Designed for woodworking: woodworking center gauge slides very smoothly and protects your working fingers from burrs, suitable for woodworking work.
• Apply to: the center marking tool can be applied to mark the center of a board whose thickness or width does not exceed 4 inch.

ACDelco Specialty 519-30 Rear Spring Assisted Shock Absorber

• Lids soft open gently, Ideal for supporting the lid to keep it open.
• Force: 18 Lbs(Per Strut), Length (Center-to-Center): 6.89 inch(175 mm), Compressed Length (Center-to-Center): 4.73 inch(120 mm).
• Support opens lids to a maximum angle of 90 degrees. Available working temperature: -10℃~50℃/14℉-122℉.
• Instructions Included, Screws Included. As the installation, just install it as the image shown in the description or the instructions in the package, While if you still have problem, please kindly Click "Ask Seller" Besides Your Order for In-time Assistance.
• We offer 1 YEAR 100% SATISFACTORY WARRANTY, if unfortunately our SOFT OPEN LID GAS STRUT did not work well, please kindly contact us for exchange, refund or return.

NEIKO 02638A 5-Inch Automatic Center Hole Punch, Adjustable Impact Spring-Loaded Puncher Tool

• CENTER HOLE-PUNCH TOOL: Our 5-inch automatic center punch tool is a great tool for working with materials like wood, plastic, metal, glass, and leather. Each center tool is spring loaded with an adjustable stroke and cap that accommodates any project..
• COMPACT STEEL TIP: Center punches are important when it comes to marking an accurate drilling location. With the spring-driven action and hard steel awl tip, our hand-held puncher lets you mark drill holes anywhere while on the job..
• HEAVY DUTY WITH IMPACT: This chrome-plated shank body withstands intense impact force, and the metal resists corrosion and damage over time. The reinforced S2 steel tip holds up to hard materials and makes surfaces ready for any nail or drill..
• EASY USE & GRIP: With a nonslip surface and a precision-centered tip, this center metal punch has increased force control for accurate holes every time. Activate this tool with a firm downward push to achieve the exact size hole you need..
• ALL-IN-ONE CENTER PUNCH: This spring-loaded glass breaker and center punch tool is suitable for all kinds of tasks. Whether you need a window hole puncher, an awl for leather belts, or a metal hole punch, this efficient tool gets the job done right..

QWORK Marking Center Finder Medium Marking Centerline Tool Stainless Steel Woodworking Line Scriber

• High quality: QWORK Marking Center Finder made of stainless steel, no rust, corrosion resistance, durable..
• Ergonomics design: In line with the ergonomics design, easy to use and labor-saving..
• Suitable for: For determining the precise center of the board edge under stable and high-speed production..
• Accurate: Mark the center on a board that does not exceed 4 inches in thickness or width..
• Easy to use: It can slide smoothly on the board, easy to operate during work, and protect your working fingers from burrs..

IAQWE 43102 Truck Tailgate Assist Shock Compatible with 2007-2018 Chevy Silverado/GMC Sierra1500 2500HD 3500HD

• Lids soft open gently, Ideal for supporting the lid to keep it open.
• Force: 18 Lbs(Per Strut), Length (Center-to-Center): 6.89 inch(175 mm), Compressed Length (Center-to-Center): 4.73 inch(120 mm).
• Support opens lids to a maximum angle of 90 degrees. Available working temperature: -10℃~50℃/14℉-122℉.
• Instructions Included, Screws Included. As the installation, just install it as the image shown in the description or the instructions in the package, While if you still have problem, please kindly Click "Ask Seller" Besides Your Order for In-time Assistance.
• We offer 1 YEAR 100% SATISFACTORY WARRANTY, if unfortunately our SOFT OPEN LID GAS STRUT did not work well, please kindly contact us for exchange, refund or return.

SLIK Pro 700 DX Tripod Legs - Black

SLIK tripod sprint MINI II GM N 4-stage travel tripod 106 556

SIRUI AM223 Travel Carbon Fiber Mini Tripod with SL-100 Two-Section Carbon Center Column

• Durable Carbon Fiber: Manufactured with premium carbon fiber, SIRUI AM-223 tripod kit is lightweight, sturdy and durable, and can support up to a 15kg/33.1lbs load..
• Compact&Portable Tripod: The SIRUI AM-223 tripod kit is retractable and foldable, thus it can perfectly fit into photographers’ carrying bag without occupying too much space..
• Detachable Center Column: SIRUI SL-100 carbon column can be either connected to tripod for extra height when it’s necessary or detached in seconds for lighter weight..
• Wide Compatibility: Both AM-223 tripod and SL-100 column are equipped with convertible 1/4” and 3/8” screws, which makes it compatible with various photographic devices..
• Flexible Working Height: With the detachable SL-100 center column and extendable legs, the working height can be adjusted from 58mm/2.3” to 350mm/13.8”+310mm/12.2”. Suitable for both indoor and outdoor photography..