Taper Pin Reamer, Spiral, 10
- Knobs, Handles, Workholding & Machine Tool Accessories.
Check StockDE-STA-CO 8115 Pneumatic Swing Clamp
- Knobs, Handles, Workholding & Machine Tool Accessories.
- Smallest in our series of pneumatic swing cylinders.
- Supplied with magnetic ring for position sensing.
Check StockGEARWRENCH 5 Pc. Straight Fluted Screw Extractor Set - 720DD
- Knobs, Handles, Workholding & Machine Tool Accessories.
Check StockTE-CO 20413 Machinist Clamp Kit, 1/2\ Table T-Slot x 3/8-16\ Stud, 52 Pieces
- Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
- For workholding during machining applications.
- 1/2" machine tool table T-slot to fit 1/2" T-slot nuts.
- Bridgeport type milling machines use Part No. 20402.
- Made from case hardened 1018 steel with a black-oxide finish.
Check StockTE-CO 20402 Machinist Clamp Kit, 5/8\ Table T-Slot x 1/2-13\ Stud, 52 Pieces
- Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
- For workholding during machining applications.
- 5/8" machine tool table T-slot to fit 5/8" T-slot nuts.
- Bridgeport type milling machines use Part No. 20402.
- Made from case hardened 1018 steel with a black-oxide finish.
Check StockTE-CO 20401 Machinist Clamp Kit, 9/16\ Table T-Slot x 1/2-13\ Stud, 52 Pieces
- Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
- For workholding during machining applications.
- 9/16" machine tool table T-slot to fit 9/16" T-slot nuts.
- Bridgeport type milling machines use Part No. 20402.
- Made from case hardened 1018 steel with a black-oxide finish.
Check StockTE-CO 20402PL Machinist Promo Kit, 5/8\ Table T-Slot x 1/2-13\ Stud, 52 Pieces
- Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
- For workholding during machining applications.
- 5/8" machine tool table T-slot to fit 5/8" T-slot nuts.
- Bridgeport type milling machines use Part No. 20402.
- Made from case hardened 1018 steel with a black-oxide finish.
Check StockOumefar 15Pcs ER11 Spring Collets Set High Precision Workholding Engraving Collets for CNC Engraving Machine & Milling Lathe Tool
- SPRING STEEL ER11 COLLETS SET: The Spring Collet is made of high quality spring steel, they are stable in performance.
- HIGH PRECISION SPRING COLLETS SET: Fine workmanship, good elasticity, high precision.
- WORKHOLDING ENGRAVING COLLETS: Collet must be placed into collet chuck nut before inserting into collet chuck.
- INDIVIDUALLY PACKAGED COLLET SET: Each collet is well packed in separate protective container with label.
- WIDE APPLICATION SPRING COLLET: The Collet Set is suitable for CNC milling lathe tool and work-holding engraving machine.
Check Stock
10 Pack Hold Down Toggle Clamps Woodworking,201B Clamps Hand Tool Toggle Clamp 220Lbs Holding Capacity,Antislip Quick Release Horizontal Toggle Clamp,Heavy Duty Toggle Clamp for Cam Over Clamp-SKYCY
- Quick Release Clamp:Cam clamp quick release toggle clamps for holdfast woodworking.Cam lever hold down clamp for cnc workholding clamps.Vertical clamp with non-slip oil and stain-resistant red vinyl solid handle is easy for woodworking clamps hand tool..
- Large Toggle Clamp:90.7Kg/200Lbs heavy duty clamps with solid grip.This 201b toggle clamp is adjustable toggle clamp by screw down clamps lever.It's perfect for t track cam action hold down clamp..
- Material: Cold rolled carbon steel, galvanized coating, corrosion resistant. Rugged grip, mounted on clamps, tool holders or removable bases..
- Size Spesifics : 5.90 * 3.74 * 1.41 inches. screw: M6 * 45..
- Wide Range of Uses: Rugged fixtures, mounted on fixtures, tool holders or movable bases, are ideal for fast fixing of metal plates or boards for machine operations, woodworking, welding, molds and more..
Check Stock
E-TING 6-Pack 4001 330Lbs Holding Capacity Adjustable Toggle Latch Clamp Smoker Latch Clamps 150Kg Quick Release Pull Latch Toggle Clamp for Various Tool Box
- Package Include - 6 Pack 4001 adjustable toggle clamp latch and 24PCS screws,.
- Material: Cold-rolled carbon Steel with Zinc plated coating for corrosion resistance.
- fit for different temperature environments, indoor or outdoor.Oil and Stain resistant red vinyl solid hand grips, complete with adjustable rubber pressure tips..
- Strong Holding Power - Made best quality of latch clamp made of top metal and enough strength to hole 330lbs(150kg)..
- Easy to Install - The toggle latch clamp are easy install, just fix them with screws. The installation distance is adjustable, maximum overall length is 4-1/8inch, lock up range from 3-1/2 to 4-1/8 inches long. Use them to keep the halves tightly or loosely closed as you like. Simply tighten the tension hook to get the maximum tightness..
- Used - 4001 toggle latch clamp perfectly fit for freezer door, cabinet doors, garbage cans, table leaf, storage box, tool boxes, cases, smoker lid, making jigs, tool fixtures, workholding, connecting movable parts, tensioning two sectional, and more..
Check StockMagswitch Ultimate Thin Stock Jig Rip Guide - Tool Attachment for use with the Magswitch Workholding System
- The Thin Stock Jig Rip Guide attachment is the ultimate thin stock work holding tool - it's three tools in one! Built for use with the Magswitch Workholding system, the jig rip guide mounts to the Universal Mounting Base and MagJigs (not included).
- Features a stepped side for most common sizes of 1/8, 1/4 and 3/8". The opposite side is sloped for odd sizes up to ¾ inch.
- Enhances safety by keeping your fingers away from the blade while also minimizing chatter for clean cuts and is low profile enough for use on your smallest tables.
- This jig rip guide features a fixed roller bearing and extends forward for accurate repetitive ripping of your thin stock, making it ideal for thin stock hold down or infeed/outfeed on a table saw.
- The jig rip guide is built from strong and durable ABS UL94VO material for years of use. All required attachment hardware is included.
Check Stock
16 Pack Adjustable Toggle Clamp, 330lbs Holding Capacity Heavy Duty 4001 Style Toggle Latch Hasp Clamp for Door, Box Case Trunk, Smoker Lid Jig, Quick Release Pull Latch, Sturdy Metal Draw Latch
- 【HOLDING CAPACITY】: 150Kg/ 330 Lbs, 4001 Style Toggle Latch Clamp..
- 【EASY ADJUSTABLE】Maximum overall length is 4-1/8”, lock up range from 3-1/2 to 4-1/8 inches long. Use them to keep two halves closed tightly or loosely as you like. Just screw the tension hook to get the maximum tightness.
- 【MULTIPURPOSE】Someone say they have thousands of USES. The hasp latch can be worked For cabinet doors, storage boxes, tool boxes, cases, smoker lid, making jigs, tool fixtures , workholding, connecting movable parts, tensioning two sectional , and more.
- 【EASY INSTALL】The toggle clamps are easy install, just fix them with screws. The installation distance is adjustable, Even if you install it little bit away or close, you could always adjust the screw and make it tight or loose.
- 【STURDY AND ANTI-RUST】:Toggle latch made by premium metal plating zinc for corrosion resistance, anti-rust. Works well for different temperature environments, indoor or outdoor. Soft plastics cover handle for easy, safe and comfortable operation.
Check Stock
5pack Hold Down Toggle Clamps Woodworking,201B Clamps for Woodworking,Vertical Clamp,Cam Clamp Quick Release Toggle Clamp for CNC Hold Down Clamps,200Lbs Heavy Duty Toggle Clamp for T Track Cam Action
- Holdfast Clamp:Quick-release horizontal toggle clamps with rubber tips,cam lever hold down clamp for cnc workholding clamps.Quick release clamp with non-slip oil- and stain-resistant red vinyl solid handle is easy for woodworking clamps..
- Large Toggle Clamp:90.7Kg/200Lbs heavy duty clamps with solid grip.This 201b toggle clamp is adjustable toggle clamp by screw down clamps lever.It's perfect for t track cam action hold down clamp..
- Material : Cold rolled carbon steel, galvanized coating, corrosion resistant. Rugged grip, mounted on clamps, tool holders or removable bases..
- Clamp Spesifics: Whole size of clamp 201B 5.90"x3.74"x1.41".
- Length of large toggle clamp foot including rubber 1.88".
- Wide Range of Uses: Rugged fixtures, mounted on fixtures, tool holders or movable bases, are ideal for fast fixing of metal plates or boards for machine operations, woodworking, welding, molds and more..
Check Stock
