Reviews Woodworking Ruler

Aweohtle Aluminum Alloy Woodworking Square, 3D Mitre Angle Measuring Tool, 45/90 Degree Woodworking Saddle Layout Square for Engineer, Carpenters, Woodworking Gifts

  • 【MULTIFUNCTION 3D SADDLE SQUARE 】There are over 10 functions for this woodworking tool: three-dimensional marks, 45°angel and 90°angel limit stop, Dovetail Template, marking gauge for parallel lines, drill gauge, ruler for vertical line and parallel line, T-shaped Scribe, Protractor. 10 in 1 design, this multifunctional 3d carpenters square is more convenient for engineers and carpentar..
  • 【PREMIUM MATERIAL ANGLE RULER】The t square woodworking ruler are made of high-quality aluminum alloy. The real material is non-deformable, anti-drop, anti-corrosion. Compared with other universal angle ruler, 3d square woodworking tools is more durable and longlasting. Even using it for drilling positioning, it still works well and would not break. Also with the fine polishing surface, angle ruler woodworking is comfortable in your hand..
  • 【ACCURATE MEASUREMENT】Laser engraved marking makes the number embedded in aluminum material, so T square ruler will not wear out and never fade.With clear engraving metric scales, Aweohtle t square ruler is accurate and easy to read. 3D design, no need to flip the body when measuring, just slide to mark the left and right 45 degree angles.With 45°& 90°limit stop and 0-90° scale, aluminum angle ruler could allow you t....
Check Stock

Mr. Pen - T Square, T Ruler, 12 inch Metal Ruler, T Square Ruler, Drafting Tools, Architect Ruler, Set Square, Drafting Ruler, Tsquare, Truler, Architectural Triangle, Tee Ruler, L Square, Scale Ruler

  • 【MULTIFUNCTION 3D SADDLE SQUARE 】There are over 10 functions for this woodworking tool: three-dimensional marks, 45°angel and 90°angel limit stop, Dovetail Template, marking gauge for parallel lines, drill gauge, ruler for vertical line and parallel line, T-shaped Scribe, Protractor. 10 in 1 design, this multifunctional 3d carpenters square is more convenient for engineers and carpentar..
  • 【PREMIUM MATERIAL ANGLE RULER】The t square woodworking ruler are made of high-quality aluminum alloy. The real material is non-deformable, anti-drop, anti-corrosion. Compared with other universal angle ruler, 3d square woodworking tools is more durable and longlasting. Even using it for drilling positioning, it still works well and would not break. Also with the fine polishing surface, angle ruler woodworking is comfortable in your hand..
  • 【ACCURATE MEASUREMENT】Laser engraved marking makes the number embedded in aluminum material, so T square ruler will not wear out and never fade.With clear engraving metric scales, Aweohtle t square ruler is accurate and easy to read. 3D design, no need to flip the body when measuring, just slide to mark the left and right 45 degree angles.With 45°& 90°limit stop and 0-90° scale, aluminum angle ruler could allow you t....
Check Stock

TWOZOZO Woodworking Edge Ruler, Precision Woodworking Tools Ruler with Adjustable Protractor Angle Finder, Stainless Steel Carpenter Mark Rule（20 Inch）

  • MULTI-ANGLE USE : Our woodworking measuring tools come with a protractor to measure both length and angle. The woodworker adjusts the angle from 0° to 70° according to the use, and draws the line in the desired position precisely. The ruler is simple and easy to operate, a good helper for you.
  • CLEAR AND LEGIBLE SCALES: T square ruler is laser precision engraved. It has permanent dark markings and white scales for maximum readability in any light.
  • DURABLE MATERIALS: The dial of the woodworking edge ruler is made of plastic ABS, and the goniometer and body are made of stainless steel, which is resistant to moisture, rust and corrosion. The measuring tape is perfect for carpenters, designers, architects, mechanics, engineers, etc.
  • EASY TO HANDLE: You can put the cross side of the disc close to the edge of the board and turn the ruler to get the angle you want, draw a straight or diagonal line. The pencil tip is placed in the notch of the serrated groove and moved along the board to facilitate your measurement.
  • WOODWORKING RULER PLACEMENT: The carpenter's ruler comes with a wall....
Check Stock

TOURACE Aluminum Woodworking Rulers with Slide Stop, 3 Pcs Ruler Set Include 6, 8, and 12 Inch Precision Pocket Rulers

  • 【Ruler Set】 Including 6, 8 and 12 inch Aluminum Precision Rulers. Professional woodworking rulers. Three sizes meet your various woodworking measurement.
  • 【Material】 Made of Aluminum Alloy and made by CNC process. wear-resistant, rust-proof, light and portable. Will not be worn after tens of thousands of times of use..
  • 【Slide Stop】Build in slide stops which can go through the entire length of the ruler. Helping repeat the measurement on the multiple boards.
  • 【Multiple measurement】Used for vertical Measuring, slide the stop off the end and insert it into the cut-out blade, now your ruler get a perfect stand to keep it upright. The bottom also marked with 1/4 1/2 and 3/4 depth measurement units..
  • You no longer need other woodworking ruler.
Check Stock

Bosch GTL3 65ft Square Laser Level for Tile and Square Layout

  • MULTI-FUNCTION: MUSIBO woodworking protractors & ruler is a multifunctional device for length measurement and angle drawing. It can measure lengths and draw parallel lines at different angles and intervals easily, which will bring much convenience to your work. Each woodworking ruler is equipped with a wall-mounted storage rack, which make it easy to store. MUSIBO woodworking protractors & ruler is an indispensable tool for every woodworkers and mechanics.
  • HIGH PRECISION: The ruler tool can be adjusted from 0° to 70°, every 5° (plus 22-1/ 2°, 67-1/ 2°) has a steel ball to lock the angle firmly during the painting lines.
  • Any angle can be obtained by moving and rotating the ruler. The ruler has a total length of 13in, and the smallest scale is accurate to 1/32in. There are 104 serrated notches and 13 circular holes, The spacing of the serrations is 11/112in (approximately equal to 2.49 mm) and that of the round holes is 1in.
  • SIMPLE OPERATION: You can make the cross surface of the disc next to the edge of the board, then turn the ruler to get the angle you want. Adjust the nut to get the best feel. Place the tip of the pencil in the saw tooth notch and then move the ruler along the edge of the board to get different parallel lines. In short, you can ....
Check Stock

Precision Pocket Ruler Woodworking by Clear Style | Inch and Metric Indicators Professional Woodworking T Track Ruler 3 Pack 6, 8 and 12 inchs

  • 5 YEARS WARRANTY ON OUR PRECISION POCKET RULER WOODWORKING.
  • CLEAR STYLE POCKET RULER - Our Pocket ruler is made by top Aluminum quality and made by CNC prcess..
  • THE BEST RULER FOR WOODWORKING AND T TRACK TASKS - Both inch and Metric..
  • 100% MONEY BACK GUARANTEE NO QUESTIONS ASKED - Our customers are #1 priority. If you are not 100% satisfied with your purchase, return it for a full refun!! ORDER NOW!!.
Check Stock

Stainless Steel t Square, Incra T Rule, Edge Ruler Woodworking, Compass and Protractor Set, Multi-Function Angle Measure Tool with Wall Hanging Storage Rack(18-INCH)

  • FUNCTION:woodworking protractors & ruler is a multifunctional device for length measurement and angle drawing. It can measure lengths and draw parallel lines at different angles and intervals easily, which will bring much convenience to your work.
  • PRECISION：The ruler tool can be adjusted from 0° to 70°, every 5° (plus 22-1/ 2°, 67-1/ 2°) has a steel ball to lock the angle firmly during the painting lines.
  • Any angle can be obtained by moving and rotating the ruler. The ruler has a total length of 18in, and the smallest scale is accurate to 1/32in. There are 144 serrated notches and 18 circular holes, The spacing of the serrations is 11/112in (approximately equal to 2.49 mm) and that of the round holes is 1in.
  • MATERIAL：The dial of this adjustable woodworkers edge rule is made of hard plastic, both the angle finder and ruler body are made of stainless steel, which is moisture-proof, rust-proof and corrosion-resistant. The laser scale is clear and precise, does not fade, and effectively extends its service life.
  • T-SHAPED DESIGN: this angle measure tool is designed with t-shape, a series of precision-machined index ....
Check Stock

45 Degree Aluminum Alloy Angle Ruler, 2in/6cm Right Angle Triangle Height Ruler Woodworking Square Multifunction Measuring Tool

  • High Quality Material: This woodworking square triangle ruler is made of high-quality aluminum alloy material, which is oxidized, not easy to corrode and rust, strong and wear-resistant, not easy to deform, and has a long service life..
  • Dual Scale Design: This angle measuring ruler is designed with both centimeters and inches, and the front and side laser-engraved scales are clear and precise, making it easy to read the value or mark when using..
  • Easy To Use: The woodworking angle ruler is designed with a large center hole, suitable for your fingers to hold or fix on the workpiece, easy and comfortable to place, handle or move without damaging the fragile cutting edge..
  • Applications: This 45 degree aluminum alloy square is designed to clip boxes, picture frames, etc. to assist in square crafting.
  • a must-have tool for woodworking hobbyists, home builders, carpenters, engineers, and hobbyists..
  • Professional Manufacturing: This square measuring ruler is manufactured by professional technology, with high precision, good effect and stable performance. It is suitable for most working env....
Check Stock

MUSIBO Protractor Angle Finder, Woodworkers Edge Ruler, T Square, T Ruler, Straight Edge inch Ruler,Multi-Function Angle Measure Tool Woodworking Metal Ruler Kit with Wall Hanging Storage Rack(13in)

  • MULTI-FUNCTION: MUSIBO woodworking protractors & ruler is a multifunctional device for length measurement and angle drawing. It can measure lengths and draw parallel lines at different angles and intervals easily, which will bring much convenience to your work. Each woodworking ruler is equipped with a wall-mounted storage rack, which make it easy to store. MUSIBO woodworking protractors & ruler is an indispensable tool for every woodworkers and mechanics.
  • HIGH PRECISION: The ruler tool can be adjusted from 0° to 70°, every 5° (plus 22-1/ 2°, 67-1/ 2°) has a steel ball to lock the angle firmly during the painting lines.
  • Any angle can be obtained by moving and rotating the ruler. The ruler has a total length of 13in, and the smallest scale is accurate to 1/32in. There are 104 serrated notches and 13 circular holes, The spacing of the serrations is 11/112in (approximately equal to 2.49 mm) and that of the round holes is 1in.
  • SIMPLE OPERATION: You can make the cross surface of the disc next to the edge of the board, then turn the ruler to get the angle you want. Adjust the nut to get the best feel. Place the tip of the pencil in the saw tooth notch and then move the ruler along the edge of the board to get different parallel lines. In short, you can ....
Check Stock

Upgraded woodworkers Edge Ruler Thickness 1.5mm Approximately 15in .0-70 Degrees Adjustable Protractor ,Multifunctional Construction Ruler JXHONG

  • Ruler thickness 1.5mm approximately, much stronger than others(0.8mm typically).The ruler dial is made of plastic with good hardness. it has a long service life..
  • woodworking ruler is a multifunctional device for length measurement and angle drawing.this tool for every woodworkers and mechanics..
  • The protractor can be adjustable from 0 degree to 70 degrees and firmly locked every 5 degrees..
  • Loosen the nut first , adjust it to a suitable angle , and then tighten the nut to fix it at this angle . Pick up the stroke line , and then go to the next step ..
  • Each woodworking ruler is equipped with a wall-mounted storage rack, which make it easy to store..
Check Stock

3 Pieces Woodworking Ruler 6 8 12 Inch Metal Millimeter Precision Pocket Ruler Metric T Type Machinist Ruler with 10 Construction Carpenter Pencils for Concrete Marking Measuring Machinist Engineer

  • Nice Combination: the package comes with 3 piece of woodworking rulers in 3 sizes, about 6 inches, 8 inches and 12 inches, and 10 pieces of wood pencils.
  • The slide ruler has scales in the inch and metric system with 3 standards, about 30 cm/ 12 inches, 20 cm/ 8 inches and 15 cm/ 6 inches.
  • The nice combination can meet your daily woodworking needs.
  • Reliable and Serviceable: the pocket ruler is made of quality aluminum alloy materials with a sturdy surface, reliable and long lasting.
  • The carpenters pencil is mainly made of wood, not easy to break or deform, they can stand for your long term use.
  • Easy to Use: the machinist ruler is compact, easy to install and replace, and can also be hung on the wall, which is convenient for storage and easy to read.
  • The 2 thumbscrews can fix the slide rail firmly, which will not loosen easily during use.
  • Precision Measurement: the metal working ruler can provide an accurate measurement reference, can be accurately measured on various drawings, has measurement scales on both sides, and can be immediately converted to the desired woodworking measurement.
Check Stock

Woodworking Edge Ruler, 0-70 Degrees Adjustable Protractor ,Multifunctional Construction Ruler, Angle Measuring Ruler,Thickness 1.5mm Approximately .(20in)

  • Ruler thickness 1.5mm approximately, much stronger than others(0.8mm typically).The ruler dial is made of plastic with good hardness. it has a long service life..
  • woodworking ruler is a multifunctional device for length measurement and angle drawing.this tool for every woodworkers and mechanics..
  • The protractor can be adjustable from 0 degree to 70 degrees and firmly locked every 5 degrees..
  • Loosen the nut first , adjust it to a suitable angle , and then tighten the nut to fix it at this angle . Pick up the stroke line , and then go to the next step ..
  • Each woodworking ruler is equipped with a wall-mounted storage rack, which make it easy to store..
Check Stock

HTTMT- 20 Woodworker Edge Ruler 0-70°Adjustable Protractor Angle Finder Two Arm Carpentry Ruler Measure Layout Tool [P/N ET-TOOL041-20-RAW]

  • 【Multi-function】HTTMT woodworking protractors & ruler is a 2-in-1 device Compatible With length and angle measuring / drawing..
  • 【High Accuracy】The ruler tool can be adjusted from 0° to 70°, and every 5° (plus 22-1/ 2°, 67-1/ 2°) has a steel ball to lock the angle....
  • 【Simple Operation】You can make the cross surface of the disc next to the edge of the board, then turn the ruler to get the angle you want. Even if....
  • 【Easy Storage】Each woodworking ruler is equipped with a wall-mounted storage rack, which makes it easy to store..
Check Stock