Reviews Woodworking Banding Machine

Edge Supply Professional Heavy Duty Edge Banding Trimmer – Edge Trimmer for Wood Veneer Edge Banding, PVC, Melamine, Plastic – Veneer Trimmer for Perfect Straight Finish – Woodworking Veneer Cutter

  • EDGE BANDING POFESSIONAL HEAVY DUTY TRIMMER – this expert designed edge banding trimmer easily cuts veneer edge banding with ease thanks to the ultra-sharp steel blade. Cut off any excess material and achieve a perfect, straight finish every time, without tearing the banding.
  • STRAIGHT FLUSH EDGES – our veneer cutter is easy to use and is suitable for use by both professionals and hobby woodworkers. A versatile veneer trimmer which cuts neatly straight lines resulting in a clean, flush finish.
  • SUITABLE FOR A VARIETY OF EDGE BANDING SIZES – this edge banding cutter has been designed to fit edging up to 1 mm thick and between 0.5 and 2 inches wide bandings.
  • PREMIUM QUALITY VENEER CUTTER – made from the highest quality carbon steel, this long-lasting veneer trimmer features a steel blade which supplies a clean cut. The blade can be sharpenned so there is no need to replace blades like traditional trimmers..
  • VERSATILE EDGE BANDING CUTTER – this veneer edge trimmer is ideal for a variety of woodworking projects including furniture, shelving and cabinetry and can be used on a wide range of materials including wood veneer, melamine, plastic, PVC and more.
Check Stock

Edge Supply Edge Banding Trimmer – Veneer Edge Trimmer for Wood Veneer Edge Banding, PVC, Melamine, Plastic – Veneer Trimmer for Perfect Straight Finish – Woodworking Veneer Cutter

  • EDGE BANDING TRIMMER – this expert designed edge banding trimmer easily cuts veneer edge banding with ease thanks to the circular, ultra-sharp blade. Cut off any excess material and achieve a perfect, straight finish every time, without tearing the banding.
  • STRAIGHT FLUSH EDGES – our veneer cutter is easy to use and is suitable for use by both professionals and hobby woodworkers. A versatile veneer trimmer which cuts neatly around tight circular radiuses and straight lines resulting in a clean, flush finish.
  • SUITABLE FOR A VARIETY OF VENEER SIZES – this edge banding cutter has been designed to fit edging up to 1 mm thick and between 0.5 and 2 inches wide.
  • PREMIUM QUALITY VENEER CUTTER – made from the highest quality carbon steel, this long-lasting veneer trimmer features a circular blade which supplies a clean cut and can be slightly rotated to expose a fresh new edge if needed. There is no need to change blades for years..
  • VERSATILE EDGE BANDING CUTTER – this veneer edge trimmer is ideal for a variety of woodworking projects including furniture, shelving and cabinetry and can be used on a wide range of materials including wood veneer, melamine, plastic, PVC and more.
Check Stock

XFasten Double Sided Woodworking Tape 1/2" x 36 Yards (4-Pack) - Double Face Woodworker Turner's Tape for Wood Template, Edge Banding, Routing, Anchoring | Strong Adhesion but Removable & Residue Free

  • EASY TO WORK WITH Double-sided woodworking tape that ticks off all criteria for edge routing, banding, splicing, anchoring and pattern cutting. Optimal thickness enables the tape to be easily peeled off without damage or tearing when needed while maintaining its strength even on high-speed CNC machine routing..
  • RESIDUE-FREE AND SURFACE-SAFE. The XFasten Woodworker’s double-stick CNC woodworking tape has a good grip but not too much- stays stable and firm while routing, but comes off easily without ripping or chipping the fibers of wood, plywood, veneer, wood laminates, and MDF surface-finish. Each roll is 36-Yards..
  • MADE BY WOODWORKERS FOR WOODWORKERS. XFasten collaborated with professional woodworkers on Instagram to ask their much-needed specs, thickness, tackiness, and width and designed the ultimate double-sided masking tape for CNC and wood..
  • PROFESSIONAL-GRADE CRAFTSMANSHIP. Cloth backing allows the double face wood turners double sided tape to resist curling and unnecessary tearing, making it easy to manage, transfer, adhere and remove, lessening the preparation time and effort needed on each template..
Check Stock

EDSRDRUS FLT 125 TRU Clear Double Sided Woodworking Tape for Delicate Surfaces and Smooth Surfaces 3/4 Inch Width CNC Machine Tape Template Routing Removable Residue-Free Surface-Safe Total 180 Feet

  • Pro Design & Great Applications: Our tape’s thoughtfully calculated 125μ thickness is sleek, designed for delicate and smooth wood surfaces. EDSRDRUS FLT 125 TRU is widely used in woodworking for splicing, turning, machine cutting, stencil making, CNC woodworking, edge banding, wiring, and anchoring. It also serves as excellent cat training, gift wrapping, or photo album tape, among many applications..
  • Removable & Residue-Free: This tape’s 15-22 pound per square inch adhesion sticks firmly without damaging smooth or delicate wood surfaces. It leaves no residue upon removal. Any minor amount left behind is easily lifted away using the tape itself..
  • Highly Adaptable: With its sleek 125μ thickness, our carpentry tape is most suitable for smooth, delicate wood surfaces. However, it's also effective on many materials, like concrete, tile marble, aluminum or steel..
  • Multiple Sizes: Our tape meets all needs. Each roll is 90 feet (27m) long. It’s available in five widths: 3/4 inch (1.905cm), 1 inch (2.54cm), 1-1/2 inch (3.81cm), 2 inch (5.08cm) and 2-1/2 inch (6.35cm)..
Check Stock

Edge Supply White Melamine 3/4 inch X 25 ft roll of White Edge Banding – Pre-glued Flexible Edging – Easy Application Iron-On Edging for Cabinet Repairs, Furniture Restoration

  • WHITE MELAMINE EDGE BANDING – this roll of white edge banding is of superior quality and pre-glued with strong adhesive. Perfect for repairing or finishing off cabinets, DIY projects, shelving or repairing furniture, this edging will give a smooth, neat finish to your projects.
  • SUPERIOR QUALITY MELAMINE EDGE BANDING – made to last, this white roll of cabinet edge banding is durable and supplies a high-quality finish. Pre-glued, our edge banding is ready for your application and easy to use without snagging or splitting.
  • PRE-GLUED FLEXIBLE EDGE BANDING – pre-glued with top-quality, hot melt adhesive, our veneer edge banding is super easy to apply with a household iron. The extra strong hot melt glue is evenly distributed on the banding strip for a strong, permanent bond.
  • EASY TO APPLY – this white edge banding is very easy to apply by simply placing it onto your item, then applying firm, hot heat with a household iron. Supplied tightly rolled up, our melamine edging is easy to hold for accuracy. An edge banding machine is of course suitable to use for application if you have one in your toolkit.
  • VERSATILE FOR A RANGE OF SURFACES – trimming edge banding is used to enhance and supply a complete look to your shelving and cabinetry. You can use this....
Check Stock

EDSRDRUS FLT 240 Double Sided Woodworking Tape Smooth & Rough Surface 1-1/2 Inch Width CNC Machine Tape Template Routing Removable Residue-Free Surface-Safe 90 Feet

  • Pro Design & Great Applications: EDSRDRUS FLT 240, PVC backing with 240μ thickness. This careful calculated thickness is ideal to fit almost all the wood template from smooth to rough finish. Extensively used in the woodworking industry including splicing, woodturning, machine cutting, template, CNC woodworking, edge banding, routing and anchoring..
  • Removable & Residue Free: With a strength rating of 20-22lbs per square inch, the optimal adhesion allows for easy application and removal without leaving a sticky, messy residue behind. Any value more than 25lbs per square inch will lead to leftover residue. Simultaneously, it will not damage or lift the delicate surface of the wood during removal. If there is a small amount of leftover, you can simply use the tape stick it. The leftover will be removed..
  • Highly Adaptable & Durable: PVC backing gives our tape flexibility and adaptability to a wide range of wood surfaces, including textured and smooth ones. This product is also suitable for use on other surfaces, including concrete, tile, marble, aluminum, steel and etc. Stability and thickness allow this tape to perform well in extreme weather conditions. Strong and stick enough which will hold well even on high-speed CNC operation..
Check Stock

DNYSYSJ Automatic Rebar Tying Machine, 8-34mm Hand Held Rebar Bender Machine Tool Kit, for Civil Building, Foor Pipe, Heating Floor Mesh, Steel Bar w/Pliers+ Charger (Orange)

  • Applicable Scope Of Steel Strapping: 8mm - 34mm.
  • Knot The Required Time: 0.8 seconds at a time.
  • Machine Size: 275 mm * 65 mm * 240 mm / 10.83''x2.56''x9.45''(appr.).
  • ★Operating Skills -- 1. In use, the left tilt 45 degrees after banding, the next time the banding into a right tilt 45 degrees banding, left and right alternately banding. 2. When the machine is about to tighten, the machine will appear slightly shaking, while holding the hand of the machine not too tight, you can relax properly..
  • 1X Tying Wire in the machine (Tying Wire Standard: About 0.8 mm x 110 m/roll). (U.S. inventory, fast shipping!).
Check Stock

Edge Supply Birch 3/4” X 250' Roll of Plywood Edge Banding – Pre-glued Real Wood Veneer Edging – Flexible Veneer Edging – Easy Application Iron-on Edge Banding for Furniture Restoration – Made in USA

  • EXTRA CLEAN "A" GRADE NATURAL WOOD VENEER EDGING – highest grade veneer quality pre-glued, birch wood veneer edging for repair or enhancing cabinetry, furniture, DIY projects, shelving, crafts and more. Finely sanded to perfection, this plywood edge banding provides a perfect finish to your projects.
  • GERMAN PRE-GLUED HOT MELT ADHESIVE – pre-glued with top-quality, German hot melt adhesive, our veneer edge banding is super easy to apply with a household iron. The extra strong hot melt glue is evenly distributed on the veneer edging for a strong, permanent bond.
  • SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron at cotton temperature, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit.
  • SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron at cotton temperature, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit PREMIUM QUALITY REAL WOOD VENEER EDGING – this birch 3/4” x 250’ iron-on veneer roll is all prepared ready for your application. Finely sanded to perfection, this plywood edge banding can....
Check Stock

EDSRDRUS FLT 240 Double Sided Woodworking Tape Smooth & Rough Surface 3/4 Inch Width CNC Machine Tape Template Routing Removable Residue-Free Surface-Safe Total 180 Feet

  • Pro Design & Great Applications: EDSRDRUS FLT 240, PVC backing with 240μ thickness. This careful calculated thickness is ideal to fit almost all the wood template from smooth to rough finish. Extensively used in the woodworking industry including splicing, woodturning, machine cutting, template, CNC woodworking, edge banding, routing and anchoring..
  • Removable & Residue Free: With a strength rating of 20-22lbs per square inch, the optimal adhesion allows for easy application and removal without leaving a sticky, messy residue behind. Any value more than 25lbs per square inch will lead to leftover residue. Simultaneously, it will not damage or lift the delicate surface of the wood during removal. If there is a small amount of leftover, you can simply use the tape stick it. The leftover will be removed..
  • Highly Adaptable & Durable: PVC backing gives our tape flexibility and adaptability to a wide range of wood surfaces, including textured and smooth ones. This product is also suitable for use on other surfaces, including concrete, tile, marble, aluminum, steel and etc. Stability and thickness allow this tape to perform well in extreme weather conditions. S....
Check Stock

Edge Banding Trimmer for All Directions, Edge Trimmer with Tungsten Carbide Blades (1-Pack)

  • Easy To Use - Works perfectly with no practice or experience, Pneumatic action allows the edge banding cutter to adjust to different thicknesses very easily. Makes edge banding a breeze, is very comfortable to use, will not cause palm fatigue..
  • Save Time - Using our edge banding tools can greatly reduce the time and effort to complete the work, no more utility knives or razor blades. This plywood edge trimmer tool makes it so easy!.
  • Sharp, Leave No Trace - The sharp tungsten carbide blades to make the trimmer cut smoothly and cleanly and leave a nice edge. Will not cause the problem of excessive cutting. Clean, tight incisions, no confusion or fuss..
  • Easy Conversion - Easy to disassemble and assemble! When you cannot slide the tool with the two jaws due to the special gap problem, you can take the veneer edge trimmer apart and use it on one edge at a time..
  • Cuts in Both Directions - The edge banding machine has four sharp cutting edges, which can trim forwards and backward. This is very suitable for trimming oak edge banding and is suitable for any project that involves installing ....
Check Stock

IDL Packaging - MiniCW34 3/4\ x 250' Mini Woven Cord Strapping Roll, 2400 lbs - Break Strength, 6 x 3 Core, White (Pack of 1)

  • 【3500N TIGHTENING FORCE】This A19 handheld pneumatic banding tools offer a large tension force3500N.
  • 【Portable & Light-weight】This banding machine is easy to carry with small size and lightweight.
  • 【HOT MELTING STRAPPING】The welding tools welds the straps together rather than using binding clips.
  • 【Automatic 】 Automatic banding machine will tighten. weld ,strap, and cut for one time.
  • 【Efficient 】Handheld strapping tool fusion time is just 2S Save time & Labor & your packaging cost.
  • 【Wide Application】Banding strapping kit suitable for carton,steel,logistics,agriculture,industries..
  • 【High-quality】Automatic strapping tool is made of excellent alloy structure It is durable and solid..
  • 【PP or PET straps】Plastic Strapping kit used for 1/2-5/8 Inch Wide PP/PET band thickness: 0.5-1.5mm..
  • 【Friction and hot welding】This strapping tool does NOT require additional fasteners for fixing.
  • This pneumatic tool works quickly and allows for making the strapping nice and tighter.
Check Stock

Edge Supply Maple Wood Veneer Sheet Flat Cut, 24\ x 96\

  • EXTRA CLEAN "A" GRADE NATURAL WOOD VENEER EDGING – highest grade veneer quality pre-glued, birch wood veneer edging for repair or enhancing cabinetry, furniture, DIY projects, shelving, crafts and more. Finely sanded to perfection, this plywood edge banding provides a perfect finish to your projects.
  • GERMAN PRE-GLUED HOT MELT ADHESIVE – pre-glued with top-quality, German hot melt adhesive, our veneer edge banding is super easy to apply with a household iron. The extra strong hot melt glue is evenly distributed on the veneer edging for a strong, permanent bond.
  • SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit.
  • PREMIUM QUALITY REAL WOOD VENEER EDGING – this birch 3/4” X 50' iron-on veneer roll is all prepared ready for your application. Finely sanded to perfection, this plywood edge banding can be trimmed if required or lightly sanded down to fit..
  • USE ON A VARIETY OF SURFACES – this roll of iron on edge banding can be stained or painted with a lacquer finish to match your project. Suitable for a wide variety of surfaces, this veneer edging is great when applied to w....
Check Stock

Mixed Variety Domestic Veneer Pack 5-6 sq ft/9 Sheets Or More

  • EXTRA CLEAN "A" GRADE NATURAL WOOD VENEER EDGING – highest grade veneer quality pre-glued, maple wood veneer edging for repair or enhancing cabinetry, furniture, DIY projects, shelving, crafts and more. Finely sanded to perfection, this plywood edge banding provides a perfect finish to your projects.
  • GERMAN PRE-GLUED HOT MELT ADHESIVE – pre-glued with top-quality, German hot melt adhesive, our veneer edge banding is super easy to apply with a household iron. The extra strong hot melt glue is evenly distributed on the veneer edging for a strong, permanent bond.
  • SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit.
  • PREMIUM QUALITY REAL WOOD VENEER EDGING – this maple iron-on veneer roll is all prepared ready for your application. Finely sanded to perfection, this plywood edge banding can be trimmed if required or lightly sanded down to fit..
  • USE ON A VARIETY OF SURFACES – this roll of iron on edge banding can be stained or painted with a lacquer finish to match your project. Suitable for a wide variety of surfaces, this veneer edging is great when applied to wood, plywood,....
Check Stock