Reviews Wood Lathe Jam Chuck

Penn State Industries PKGR10SS Easy Elegance Peppermill Mechanism Kit Starter Package Woodturning Project

  • This is a woodturning project kit. Grinder parts, drill bit, and jam chuck only. A LATHE IS NEEDED TO MAKE INTO FINISHED PEPPERMILLS. Blanks and all other turning tools and accessories are not included..
  • PKGR10SS includes the following: (2) Easy Elegance Peppermill Kit (PKGRIND10), (1) 2.04" Forstner Bit (FB204), and (1) 2" Jam Chuck (CJAM2X).
  • Mechanism (3.75" high x 2" diameter) has a ceramic grinder and 1.5" clear viewing window. Variable grind is adjusted with a knob at bottom of mechanism..
  • Turn the top and bottom sleeves to your desired length and profile. Minimum blank size needed to turn is 2.5" x 2.5" x 6". Turn with included jam chuck, or between centers..
Check Stock

4-Jaw Self-Centering Chuck Set, Z011 Four Jaw Mini Lathe Chucks w/ Connecting Rod & Wrench, Mini Power Lathe Machine Replacement Parts Accessories (Type C)

  • 【3 Jaw or 4 Jaw Self-Centering Chuck Set for Mini Lathe】- Type B comes with 1 x Connecting Rod + 1 x Three Jaw Chuck + 2 pcs x Short Sticks.
  • Type C - 1 x Connecting Rod + 1 x Four Jaw Chuck + 1 x Wrench. This chuck connecting rod is suitable for Z011 Three Jaw or Four Jaw Woodworking Mini Lathe Chuck..
  • 【Mini Lathe Chuck & Connecting Rod Replacement】- You can use it to replace the old or brocken one. The clamping range of this chuck is between 1.8-56mm, which is suitable for clamping a variety of industrial parts..
  • 【Compact Size, Easy to Use】- Mini Lathe Chuck diameter about 48mm, Outer diameter about 12 mm-65 mm, Inner diameter about 1,8mm-56mm.
  • 2. Connecting Rod size about 5.2cm x 6mm/2.05x0.24inch (LxD), Connecting Thread about M12x1mm. Perfect for mini metal and wood lathes..
  • 【Stainless Steel Chuck Connecting Rod】- The Connecting Rod is made of High carbon steel material, anticorrosion, not easy to rust, durable and sturdy, ensure it has high hardness and can be reused..
  • 【Practical Power Lathe Accessories】- Our chuck connecting rod is stable and has great performance while using, it is the ideal choose for you. High accurate connecting rod so that they can better fit with the Mini Lathe Machine Parts..
Check Stock

OrangeA K11-200 Lathe Chuck 8 Inch 3 Jaw,Self Centering Chuck Hardened Steel Jaws,Internal External Grinding for Lathe Drilling Milling Machine

  • Quality Material: The lathe chuck body is made of high-quality hardened steel, and the hardness test of the jaws and guides is HRC58-62. It has high strength and toughness, compression resistance and durability, and long service life..
  • High Precision: The wood lathe chuck jaws and three jaws are self-centering, the alignment accuracy is less than or equal to 0.002" / 0.05 mm, and no adjustment is required after installation. The high precision design of the chuck bevel gear guarantees the accuracy of the chuck operation..
  • Double Jaw Chuck Jaws: Internal jaw is a positive L-shape, and external jaw is an inverted L-shape. The clamping range of this chuck is between 0.16" / 4 mm - 7.87" / 200 mm, which is suitable for clamping a variety of industrial parts..
  • Fast Clamping Speed: The 3 jaw lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
  • High Adaptability: The accessory screws make the scroll chuck highly adaptable and can be used with the same series of jaws as the chuck. This power lathe chuck is suitable for clamping various parts such as hanging shafts, disks, equilateral triangles, etc..
Check Stock

OrangeA K11-250 Lathe Chuck 10 Inch 3 Jaw, Self Centering Chuck Milling Hardened Steel, Internal External Grinding for Lathe Drilling Milling Machine

  • Quality Material: The lathe chuck body is made of high-quality hardened steel, and the hardness test of the jaws and guides is HRC58-62. It has high strength and toughness, compression resistance and durability, and long service life..
  • High Precision: The wood lathe chuck jaws and three jaws are self-centering, the alignment accuracy is less than or equal to 0.002" / 0.05 mm, and no adjustment is required after installation. The high precision design of the chuck bevel gear guarantees the accuracy of the chuck operation..
  • Double Jaw Chuck Jaws: Internal jaw is a positive L-shape, and external jaw is an inverted L-shape. The clamping range of this chuck is between 0.24" / 6 mm - 9.84" / 250 mm, which is suitable for clamping a variety of industrial parts..
  • Fast Clamping Speed: The 3 jaw lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
  • High Adaptability: The accessory screws make the scroll chuck highly adaptable and can be used with the same series of jaws as the chuck. This power lathe chuck is suitable for clamping various parts such as hanging shafts, disks, equilateral triangles, etc..
Check Stock

4 Inch 4 Jaw Mini Wood Lathe Self-Centering Chuck Set for Beginners Turning Wood Bowls Vases (1 Inch x 8TPI Thread)

  • PAKAGE LIST: Included Chuck body, a set of Tightening Levers, T allen wrench, Screw chuck.
  • FEATURES: Internal jaws tighten around workpieces varying from 1-1/2" to 3-3/8". External jaws spread inside of workpieces with pilot holes ranging from 2" to 3-7/8" Included screw chuck provides even more options for supporting your projects.
  • HIGH PERFORMANCE LATHE CHUCK：Our 4-inch 4 Jaws Lathe Chuck has the function of self centering with superior gripping force,it does not need to be repeatedly calibrated during clamping. It just needs to clamp the workpiece according to your needs, which is simple, fast and convenient.
  • WIDELY USED: Scroll chuck perfect for holding bowls, spindles, and other unwieldy wood lathe projects. Widely used for machine tools and accessories for general lathes and industrial machines.
  • FRIENDLY REMINDER: Definitely make sure you get it tight, Otherwise, It also loosens in the middle of your work, causing your project to fly off the lathe.
Check Stock

CXOYLL Z011A 4-Jaw Chuck for Mini Lathe, Self Centering Mini Lathe Chuck with L-Shaped Wrench, Zinc Alloy Chuck Clamp Accessory Inner Clamping Diameter 1.8-56mm (Silver)

  • 【Z011A 4-Jaw Chuck, FourJaw Mini Lathe Chuck】- 1. 4-jaw design, compact size, easy to use. The Mini lathe tools 4 Jaw Chuck has a large clamping range. Outer diameter about 12 mm-65 mm, Inner diameter: about 1.8mm-56mm..
  • 【Woodworking Accessories Self-centering 4 Jaw Lathe Chuck】- The self-centering lathe part contains a delicate oblique angle gear and pinion gears. They contribute to precise processing progress. Widely used for woodworking lathe..
  • 【Scope Applications of the Zinc Alloy Mini Lathe Chuck】- The 4 Jaw design Lathe Chuck is made of high quality zinc alloy material, wear-resistant, strong and durable. Mainly used for mini metal lathe. Since the changeover and setting time is cut, your lathe can work with higher efficiency..
  • 【Practical Lathe Accessories Self Centering Mini Chuck】- The lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
  • 【Package included】- 1 x Lathe Chuck, 1 x L-shaped Wrench.
  • The 4 Jaw lathe chuck is widely applied to Mini metal lathes for the general turning of shafts and some more delicate materials. It would be the perfect choice for your lathe machin....
Check Stock

VEVOR 2.75-Inch Wood Lathe Chuck, 4-Jaw Precision Self-Centering Keyed Lathe Chuck Set, 1-Inch x 8TPI Thread Mini Lathe Chuck, Woodturning Chuck Jaws, Wood Lathe Accessories for Bowls Vases

  • Applicable Workpiece Size: The wood turning chuck is ideal for mini and lathes. Inner jaws tighten around workpieces varying from 0.9" to 1.9". Outer jaws spread inside of workpieces with pilot holes ranging from 1.4" to 2.5". Comes with a set of accessories, including 1 x chuck key, 1 x Screw Chuck Stud, and 1 x wrench to facilitate your work..
  • High-performance Chuck: Each jaw can be adjusted to the center with superior gripping force. Self-centering improves the flexibility. Clamping most shaped workpieces can also be performed..
  • Simple Operation: This complete lathe chuck set includes a precision jaw and a set of installation tools, which bring much convenience to your operation. The chuck has 1" x 8 TPI Thread and 3/4" x 16 TPI Adapter (Mounted on the Chuck).
  • Compact and Stable: Our mini wood lathe chuck is well-designed and made of high-quality steel. Both sides of jaw teeth and chutes are ground to be sturdy. It is coated with antirust oil to prolong the service life..
  • Versatile Application: Applicable to the general lathe, grinder, milling machine, drilling machine and machine accessories, woodworking machinery accessories and other machine tools and accessories..
Check Stock

Wood Lathe Chuck 6 inch 4 Jaws Self-Centering Lathe Chucks Thread 1 x 8TPI Lathe Chuck for Woodturning

  • 【EXCELLENT QUALITY】：The chuck is well-designed and made of high-quality steel. The sturdy chuck can stand high-intensity work.Durable wood Lathe chuck and have a greatly service life ..
  • 【APPLICABLE WORKPIECE SIZE】：Internal Jaw Clamping Range: 0.2-3.9inch (5-100mm). External Jaw Clamping Range: 3.8-5.3inch (98-135mm)..
  • 【FREE ACCESSORIES】：We provide a set of installation tools for free . It can help you better install the chuck and processing on the lathe..
  • 【HIGH PERFORMANCE JAWS】：Each jaw can be adjusted to center with superior gripping force, the self-centering improves the flexibility of the chuck , can clamping most shaped workpieces..
  • 【APPLICATION】：Applicable to the general lathe, grinder, milling machine, drilling machine and machine accessories, woodworking machinery accessories and other machine tools and accessories..
Check Stock

PROXXON MICRO Mill MF 70, 37110

  • Includes the lathe, chuck key, five-piece carbide tipped cutter kit, internal chuck jaws and external chuck jaws, 11 feed rate gears and owners manual.
  • Drill, cut and turn metal, wood and plastic parts with precision..
  • Erie Tools variable speed 7 in. x 14 in. benchtop mini metal lathe creates precision parts..
  • Variable speed motor adjusts to 2500 RPM in either rotational direction allows left-handed threads..
  • Thread indicator helps users turn screw threads anywhere from 12 to 52 TPI. Metric or imperial..
Check Stock

Double Bearing Live Revolving Centers For Lathe Machine- Engineering Tools (2MT- M12 X 1)

  • Quality Precision Double Bearing Live Revolving Centers-Made from Quality Tools Steel.
  • Comes in 2MT with M12 x 1 mounting threads to mount the chuck or drill chuck for long work piece support while turning on the lathe.
  • Chose as per your Lathe machine tailstock 's taper . Perfect for both Wood turning & metal working.
  • Shanks are hardened & precisely ground . The mounting thread spigot has been machined to hold through a spanner to hold it from revolving and tightening the chuck on it..
  • Concentric run out within 10 microns. Recommended for Conventional Lathe Machines Only.
Check Stock

Mophorn K11-200 Lathe Chuck 8 Inch 3-jaw,Lathe Chuck Self Centering Reversible Hardened Steel With Internal and External 2 Set Jaws

  • Premium Steel Structure: The lathe chuck body is made of high-quality hardened steel, and the hardness test of the jaws and guides is HRC 58-62. It has high strength and toughness, compression resistance and durability, and long service life..
  • Large Clamping Range: This chuck includes two sets of internal and external jaws. The clamping range of this chuck is between 0.16" / 4 mm - 7.87" / 200 mm, which is suitable for clamping a variety of industrial parts..
  • High-Performance Chuck: The wood lathe chuck jaws and three jaws are self-centering, the alignment accuracy is less than or equal to 0.002" / 0.05 mm, and no adjustment is required after installation. The high precision design of the chuck bevel gear guarantees the accuracy of the chuck operation..
  • Effortless Operation: The lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient. The chuck has 1" x 8 TPI Thread and 3/4" x 16 TPI Adapter (Mounted on the Chuck).
Check Stock

VEVOR Wood Lathe Chuck, 3.75\ Woodturning Chuck, 4-Jaw Gear Chuck, 1In x 8TPI Thread Mini Key Chuck, Precision Self-Centering Woodturning Chuck Jaws, Wood Lathe Accessories for Bowls Vases

  • Applicable Workpiece Size: The wood turning chuck is ideal for mini and lathes. Inner jaws tighten around workpieces varying from 2" to 2.5". Outer jaws spread inside of workpieces with pilot holes ranging from 2.4" to 3.1". Comes with a set of accessories, including 1 x chuck key, 1 x Screw Chuck Stud, 1 x Allen key, and 1 x wrench to facilitate your work..
  • High-performance Chuck: Each jaw can be adjusted to the center with superior gripping force. Self-centering improves flexibility. Clamping most shaped workpieces can also be achieved..
  • Simple Operation: This complete lathe chuck set features an adaptor that change 1''x 8TPI into M33 x 3.5TPI. A set of installation tools can bring much convenience to your operation..
  • Compact and Stable: Our mini wood lathe chuck is well-designed and made of high-quality steel. Both sides of jaw teeth and chutes are ground to be sturdy. It is coated with antirust oil to prolong the service life..
  • Versatile Application: Applicable to the general lathe, grinder, milling machine, drilling machine and machine accessories, woodworking machinery accessories and other machine tools and accessories..
Check Stock

Lathe Chuck, K72-80 4 Jaw 3.15 Inch 4000r per min Independent and Reversible Jaw Metal Lathe Chuck Turning Machine Accessories with 1 Hex Wrench and 3 Screws

  • HIGH QUALITY: The K72-80 Lathe Chuck is 100% brand new and high quality, hardened and durable in use..
  • WHOLE SET: The package of this Lathe Chuck includes 1 x 4-Jaw Lathe Chuck, 1 x Hex wrench and 3 x Screws..
  • FEATURES: Each jaw of 4-Jaw Lathe Chuck is independently adjustable and reversible. The speed is 4000r/min. The chuck diameter is approx. 80mm / 3.15in..
  • SUPERIOR PERFORMANCE: The Metal Lathe Chuck can be adjusted Independently to center suitable for processing special with superior gripping Force..
  • LONG LASTING: Vulnerable parts of the Chuck Lathe Parts are specifically engineered by quenching, for greater durability and extended life..
Check Stock