Reviews Wireless Remote Control Receiver

kipa Winch Solenoid Relay 12V 250A for ATV UTV SUV Jeep Trailer Hydraulic Pump Lift Jack Replace OEM Part # 63070 62135 74900 2875714 70715 with Waterproof Caps and Instruction Manual

  • 1.Allows operator to keep clear of dangerous rigging.Operator can monitor winching or lifting from different positions..
  • 2.Heavy duty winch remote control unit,Wireless remote control kit 12V for winches up to 2000-20000lb.Easy to install and use, portable..
  • 3.Built-in antenna design,Remote range up to about 164feet.Visual indicator light shows remote operation..
  • 4.Weather-resistant receiver WATERPROOF design,Waterproof casing will protect the receiver from rain or coffee spill, Submerged in water operation is NOT recommended..
  • 5.Wireless remote control kit for TruckJeep or ATV SUV winch,Package includes: 1X 12V Wireless Winch Receiver,2X 12V Wireless Winch Remote..
Check Stock

RF Remote Control Reverse Polarity 12VDC Motor Control with Auxiliary Switch Input

  • 1. Wireless Remote Control Kits – The DC 12 volt relay switch is equipped with 4 channel wireless receiver that built with high stability, security and performance. While the included 2 remote controls transmit strong signal that can pass through walls, floors and doors, steadily control receiver from any place within a reliable distance, max range up to 164ft/50m with no obstacle..
  • 2. Home Automation Security Relay – Learning code of 433mhz wireless transmission module has high-level security for its low repetitive rate and re-learn mode, by which it can delete the old code and re-learn a new code when a remote control get lost, so you are always in control of it..
  • 3. Remote Relay with 3 Modes of Operation – Use a jumper to configure 3 modes of operating selection pulse / momentary, hold / toggle and latching mode. 4 independent relay channels can either work together (in latching) for polarity reversing or individually (in pulse / hold) to control different electronics, such as two channels for garage door controller motor, the other two for entry lights..
  • 4. Easy and Flexible Switch Relay – The wireless relay kit is a perfect remote switch for those hobbyists with home automation DIY projects or business Industrial electrical. The power input....
Check Stock

Universal Ceiling Fan Remote Control and Receiver Kit, Replacement for Hampton Bay, Hunter, Harbor Breeze, 3-Speed, Light Dimmer, Fan-HD5 L3H2010FANHD RR7079T CHQ7078T UC7078T FAN28R Fan-HD Kit

  • 【 Easy to Install 】 This kit come with a remote, a receiver and some necessary accessories. Please follow the Instruction of Installation and Operation to intsall it. If you have PULL CHAINS SWITCH, Please note that before using the wireless remote control, use the PULL CHAINS SWITCH to turn the wind speed to maximum and turn the fan light On. Only in this way can the PULL CHAINS SWITCH and wireless remote control be used together..
  • 【 Package 】Includes 1 Ceiling Fan Remote Control, 1 Remote Holder, 1 Ceiling Fan Receiver, 6 Wire nuts, 2 screws and 1 Luminous Sticker. Luminous sticker need light to save energy, it can be attached to the remote control to help you find it in the dark. This remote control use a 9V batteries (NOT INCLUDE) for power supply..
Check Stock

2 Pack Universal Ceiling Fan Remote Control Kits, Wireless Remote and Receiver Kits for Harbor Breeze Hunter Honeywell Hampton Bay Kichler Ceiling Fan lights, Fan Speeds Lamp ON/OFF and Timing Control

  • ...ote - No more getting up to turn the lights/fan off after reading in bed/sleeping! It adds remote control compatibility to any fan. Aubric Universal Ceiling Fan Remote Controls Kit works well with 95 percent of ceiling fan light, like Hunter, Harbor Breeze, Westinghouse, Honeywell and Others well-known brands. This wireless controller kit converts traditional ceiling fan with lights into a remote controllable one..
  • Multi Fuction Remote Control Kits for Celing Fan Lights - 3 in 1 function, includes 4 buttons for Fan speeds control (High/ Medium/ Low) and OFF.
  • separate light on and off control (no dimming).
  • and 4 buttons for countdown timing remote setting and control (1H/ 2H/ 4H/ 8H)..
  • Easy Installation - The ceiling fan remote controls kit can be installed over pull chain switch or wall switch ceiling fan. No need to take off the light kit and blades. Only 5 wires hookup. All we need to do is loosen the collar at the ceiling, let it slide down to reveal the wires and access into the electrical can. Two wires for powering on the receiver, and three wires into the fan to control the fan and light..
  • RF Wireless Remote Control with Strong Signal - Each receiver supports to pair with 5 remote controls. While you can also install with serval ceiling fan light....
Check Stock

X-WLANG Upgraded Wireless Light Switch and Receiver kit, Remote Control Light Switch and Wireless Switch kit, No Wiring, Quickly Create Switch for Ceiling Lights, Fans, Lamps etc, White

  • ✅【Simple to Install】- Remote Light Switch Wireless , Wire between the power line and light's fixtures.
  • No needed to wire in-wall , Expand your lighting system freely and also won't affect the existing system.
  • ✅【Strong Signal and Safety 】- Strong RF signal works through walls and doors without any interference and Remote control halogen lamps, your bulbs, LED lights etc, Remote Control Range:100 Feet (Free Area), Pull out the Anttena which is black wire(17cm long) from Receiver box. Range is 150 feet ,Max output power: 1000W..
  • ✅【 Programmable and Expandable】- Remote control light switch, One Wireless receiver can hold up to More Remote Control Panels. And one Remote Control panel holds up to More Wireless Receivers . Ideal to control your garage ,garden shed and outside light comfortably.Switch and receiver have been pre-programmed for immediate use..
  • ✅【 Widely Used on Various Appliances】- Small receiver fits limited space like rose/canopy, electrical junction box, switch box. Widely Use in ceiling lights, indoor lighting fixtures, plug-in pendant, hard-to-reach lights, lamps and other electric appliances with wall switch etc. Working temperature Range: -25℃ ~+65 ℃..
  • ✅【Best Quality GUARANTEED003c/b003e】- 450,000 times for....
Check Stock

VFTR

  • REMOTE RECEIVER: Our simple connectivity allows you to control your ADJ compatible Fog Machines in just seconds! Just plug the receiver in and start tapping away with your handy wireless remote!.
  • STRONG CONNECTION: You can be sure of ADJ’s Wireless Fog Remote’s reliable 2-meter range..
  • EASY CONTROL: Control your Fog Fury 2000 and Fog Fury 3000 with ADJ’s Fog remote simply with timer options, intervals, duration, and output..
  • LONG CABLE: Enjoy a 12-foot cable length so you can adjust settings far or near to ADJ compatible fog machines..
  • EASY TO INSTALL: Simply locate the fog machines IEC socket, plug in the chord, and turn on..
Check Stock

Sewell SW-32988 Direct BlastIR Wireless Pro IR Repeater, Remote Control Extender Kit (IR Emitter and Receiver),Black

  • Note Some devices use RF instead of IR for remote control. The Blast IR Wireless Pro only works with IR devices. Please check the signal type of your remote to ensure it is IR before ordering. .Wireless Distance: 200m (650 ft.), distance may vary due to obstacles, IR Receiver Distance: 7m (30 ft.)Incompatibility : Yamaha HTR 6140, Arris DCX 3520E-M, OSD ATM-7 Speaker Selector.
  • BlastIR Pro receivers are directional and require facing the receiver towards where you will be using the remote. To improve reception and widen the angle of control, we recommend using the included IR receiver cable connected to the main receiver unit..
  • BlastIR Pro Emitters work best when placed within a few inches of the devices you want to control. For best results we recommend attaching the included optional IR emitter cables so that the emitter is directly over the IR receiver of up to two devices. These are designed to stick directly to the devices that you are trying to control rather than sitting in front of them..
  • Included USB and AC power cables, extra IR cables, mounting adhesive, and rubber feet..
  • Wireless Distance: 200m (650 ft.), distance may vary due to obstacles, IR Receiver Distance: 7m (30 ft.).
Check Stock

Universal Ceiling Fan Remote Control 53T and Receiver Kit Add to Any 3-Speed Fan with Dimming for Hampton Bay, Harbor Breeze,Hunter Remote Controls

  • WIDE REPLACEMENTYUKIHALU Universal Ceiling Fan Remote Controls Kit works well with most of ceiling fan light, compatible with Hunter, Harbor Breeze, Westinghouse, Honeywell and Others well-known ceiling fans. This wireless controller kit converts traditional ceiling fan with lights into a remote controllable one. Scope of Application: Home, Restaurant, Office, Hotel, The Club, Garage. Please note that the receiver does not have the function of Reverse..
  • SUPER SMALL SIZE: Super Small Size as no relay inside. You just need very small space to install the receiver unit into fan canopy. However, please also check the dimension of receiver carefully to make sure there is enough space in the canopy of your fan although the receiver is really small size..
  • ADVANCED TECHNOLOGY: Soft switch and Zero cross detection technology. No time delay, No switch electric arc, No inrush current. Large improve the reliability. Not require selecting pin codes in multi-fans application, remote and receiver had been paired in factory. New technology make the ceiling fan remote controller kits to be more safe and long lifetime..
  • 3-IN-1 Multi-FUNCTIONS: Include 4 separate buttons for Fan control :3-speeds (High/Medium/Low) and OFF.
  • 4 separate buttons for Timing remote setting and ....
Check Stock

YukiHalu 3-in-1 Small Size Universal Ceiling Fan Remote Control Kit with Light and Timing, Wireless Remote Control and Receiver Kits for Ceiling Fan Lamp

  • 【WIDE REPLACEMENT】YUKIHALU Universal Ceiling Fan Remote Controls Kit works well with most of ceiling fan light, compatible with Hunter, Harbor Breeze, Westinghouse, Honeywell and Others well-known ceiling fans. This wireless controller kit converts traditional ceiling fan with lights into a remote controllable one. Scope of Application: Home, Restaurant, Office, Hotel, The Club, Garage. Please note that the receiver does not have the function of Reverse..
  • 【SUPER SMALL SIZE】: Super Small Size as no relay inside. You just need very small space to install the receiver unit into fan canopy. However, please also check the dimension of receiver carefully to make sure there is enough space in the canopy of your fan although the receiver is really small size..
  • 【ADVANCED TECHNOLOGY】: Soft switch and Zero cross detection technology. No time delay, No switch electric arc, No inrush current. Large improve the reliability. Not require selecting pin codes in multi-fans application, remote and receiver had been paired in factory. New technology make the ceiling fan remote controller kits to be more safe and long lifetime..
  • 【3-IN-1 Multi-FUNCTIONS】: Include 4 separate buttons for Fan control :3-speeds (High/Medium/Low) and OFF.
Check Stock

Presentation Clicker Wireless Presenter Remote USB Control Powerpoint PPT Clicker, Laser Pointer RF 2.4GHz Presenter Remote Google Slide Advancer Powerpoint Clicker for Computer/Laptop/Mac/Keynote

  • 【50FT WIRELESS REMOTE CONTROL DISTANCE & 300FT LASER DISPLAY RANGE】Wireless presenter remote control distance range of up to 50-foot, so you can free to move around the room and interact with your audience. The bright red laser pointer that's easy to highlight key areas of your slides. You can continue to control the slides PPT without returning to computer.
  • 【PRESENTER REMOTER CONTROLLER BUTTONS】 The powerpoint remote supports page backward/forward, full/black screen.
  • Hold down the button to let the laser on.
  • Note: Press down the CONNECT button on the back of the presenter remote can keep the red laser always on. One-touch keys easy to control the slideshow.
  • 【PLUG AND PLAY】Just plug into the wireless receiver USB, no need to install software(For mac, you may need to requires simple set-up). Note: the USB receiver store under the battery cover, never worry to lose it without using it. PACKAGE: 1xWireless Presenter remote control, 1xUltra-Slim Wireless Receiver, 1xUser Manual.
  • 【SUPPORT OPTIONS】 You can use it as presentation clicker on speeching, meeting, and classroom... With page up and page down buttom, supports MS Word, Excel, PowerPoint, ACD See, website, iWork (Keynote & Numbers & Pages) etc.
  • For MacBook on OS, plug the usb receiver ....
Check Stock

Wsdcam Wireless Light Switch Receiver Remote Control Ceiling Lamp LED Bulb - Outdoor 1900 ft Indoors 229 ft No Battery No Wiring No Leakage

  • Wireless Light Switch Receiver with small size can easily fits into existing wiring boxes, like light fixture canopy, electrical junction box,....
  • CE, FCC, ROHS, CQC Certified, no electric leakage probable. Support any lighting source, CFL, incandescent, fluorescent, LED lights, etc. Also can....
  • No signal interference between receivers, signal can go through walls, 229ft wireless range indoor and 1900ft wireless range outdoor, receiver wired....
  • Wireless switch receiver need work with Wsdcam remote switch to remote control lights or appliances on/off, remote switch sold separately.
  • DIY paring wireless switches and receivers to control multiple/one lights in one room or across the entire house.
Check Stock

Qook 2pcs 12V Recovery Wireless Winch Remote Control Handset Switch

  • Wireless remote control kit 12V for winches up to 17,000lb..
  • Wireless winch remote control with two remotes..
  • Built-in antenna design, wireless control range max. 150ft.
  • Package includes: 1X 12V Wireless Winch Receiver + 2X 12V Wireless Winch Remote.
Check Stock

RF Mini Wireless Remote Controller for Single Color 3528 5050 LED Strip Lights, Wireless Remote Control with DC Connector, RF Dimmer for 12V DC LED Ribbon, Shelf Lights

  • 1. Wireless Remote Control Kits – The DC 12 volt relay switch is equipped with 4 channel wireless receiver that built with high stability, security and performance. While the included 2 remote controls transmit strong signal that can pass through walls, floors and doors, steadily control receiver from any place within a reliable distance, max range up to 164ft/50m with no obstacle..
  • 2. Home Automation Security Relay – Learning code of 433mhz wireless transmission module has high-level security for its low repetitive rate and re-learn mode, by which it can delete the old code and re-learn a new code when a remote control get lost, so you are always in control of it..
  • 3. Remote Relay with 3 Modes of Operation – Use a jumper to configure 3 modes of operating selection pulse / momentary, hold / toggle and latching mode. 4 independent relay channels can either work together (in latching) for polarity reversing or individually (in pulse / hold) to control different electronics, such as two channels for garage door controller motor, the other two for entry lights..
  • 4. Easy and Flexible Switch Relay – The wireless relay kit is a perfect remote switch for those hobbyists with home automation DIY projects or business Industrial electrical. The power input....
Check Stock