Reviews Wire Terminal Fuses

The TAB Battery Book: An In-Depth Guide to Construction, Design, and Use

  • SAE battery connector extension cable is heavy duty 10AWG wire which can reduce power loss, thick and durable. The inner core of the cable is made of high quality copper wire. Length: 60cm/2ft. Rated Voltage: 600V..
  • The SAE connector is equipped with a dust cap. When the cable is not in use, the dust cap covers the SAE connector to keep the inside of the connector clean and dry. Waterproof and dustproof. Thus extending the service life of the cable..
  • The other end is 0.32"/8mm Tin plated Ring Terminal. Comes with 15A, 20A, 30A fuses for electrical protection to meet your different needs. Heat and corrosion resistance, which can work normally in a wide voltage range of DC 12-24V..
  • Specially designed for extending car or motorcycle battery charging terminals, maintaining a trickle charge saves the battery. Not only can it be powered directly from the motorcycle's existing SAE socket, it can also be powered from the battery by connecting to a ring terminal extension cord..
  • Package include: 1 Pack SAE to ring terminal extension cable, 3PCS 15A/20A/30A fuses, 1PC SAE to SAE polarity reverse adapter..
Check Stock

70955

  • FEATURES: 12 position terminal block for accessory attachment.
  • 6 40-amp cube style relays (plug-in style).
  • 6 Diodes to prevent LED “field collapse”.
  • Inline 50amp manual resetting circuit breaker.
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery.
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit.
  • Fuse for LVCO which can be removed to bypass the LVCO.
  • High-temp, abrasion resistant wiring cables.
  • KIT CONTENTS: (1) Switch pod w/ 6 Rocker Switches, (1) Switch pod wiring harness, (2) Switch pod mounting brackets, (1) Relay pod, (1) Relay pod power wire, (1) Relay pod ground wire, Mounting hardware.
Check Stock

Blue Sea Systems 5035 / Blue Sea 5035 ST Blade Fuse Block w/Cover - 6 Circuit Independent w/o Negative Bus

  • DIN Rail Mount 20 Position Screw Terminal Block Distribution Module with 10 Channel Fuses..
  • Terminal postion 01 to 01, 02 to 02 ......, 10 to 10 direct connected, rated current 30Amp for per channel..
  • Terminal postion F1 to F1', F2 to F2' ......, F10 to F10' connect via fuses, rated current 10Amp for per channel. Replaceable fuses with easy to operate fuse holders, fuse holders for D5mm x L20mm tube fuse, factory-installed fuses Slow Blow 10Amp..
Check Stock

Blue Sea Systems 5006100 Maxi Fuse Block and in-Line Fuse Holder blue/sea, 80 amps

  • Max. amperage: 80A, max. voltage: 32V DC, #10 mounting screws, screw terminal torque: 25 in-lb, wire size: 14-4 AWG.
  • Snap-on terminal cover insulates all conductive parts, satisfying ABYC/USCG requirements.
  • Cover breakouts allow wires from sides or bottom. Label recess accepts large format label.
  • Terminal screws compress fuse blades within blocks for low resistance connections.
  • Accepts MAXI Fuses. Fuse sold separately.
Check Stock

SoundBox 4 Gauge Amp Kit True AWG Amplifier Install Wiring 4 Ga 20 Ft Power Cable, 3500W

  • 17ft (5.5 meters) OFC 4-channel dual twisted-pair construction RCA interconnect cable, with black nylon wire loom and satin chrome tips..
  • 17ft (5.5 meters) Premium True-spec 4 Gauge OFC red power wire with seamless ring terminal, wrapped in 6ft nylon braiding tubing. Two 4 Gauge nickel plated spade terminals with red/black boots.
  • 3ft (.95 meters) Premium True-spec 4 Gauge OFC black ground wire with seamless ring terminal. 20ft (6.4 meters) OFC 18 Gauge remote turn on lead wire. 30ft (9.5 meters) Premium True-spec 16 Gauge OFC red/black speaker wire.
  • One brass ANL/Mini-ANL Fuse-holder with 100A ANL fuse offers ideal protection for high powered systems. 1pc 80A and 1pc 120A ANL fuses are included. One black rubber firewall grommet..
  • Five 16 Gauge spade terminals with red/black boots. Four 16 Gauge speaker terminals. Two Red 18 Gauge butt connector. 10pcs 6” Black zip ties and 1pc screw/washer.
Check Stock

ProMariner 51815 15' Universal DC Cable Extender

  • 15 foot DC cable extender universally designed for all marine chargers with ring terminal cables. Use with all on-board marine battery chargers when standard battery charger cables do not reach your bow, center mount or stern battery compartment locations.
  • No cutting, stripping or splicing required and color coded for quick and easy installation.
  • Slide & snap fully insulated connection covers. Corrosion resistant tinned 12 AWG copper wire and gold plated hardware.
  • Dual inline waterproof fuses for maximum wire protection.
Check Stock

ProMariner 51805 5' Universal DC Cable Extender

  • 5 foot DC cable extender universally designed for all marine chargers with ring terminal cables. Use with all on-board marine battery chargers when standard battery charger cables do not reach your bow, center mount or stern battery compartment locations.
  • No cutting, stripping or splicing required and color coded for quick and easy installation.
  • Slide & snap fully insulated connection covers. Corrosion resistant tinned 12 AWG copper wire and gold plated hardware.
  • Dual inline waterproof fuses for maximum wire protection.
Check Stock

Blue Sea Systems 5191 Fuse Block Terminal 30-300 AMP

  • Voltage Max Operating: 58V DC, Amps Max Operating: 300A per block, Terminal Fuses Avail.: 30A-300A, Terminal Stud Size: 5/16"-18 (8mm), Mounting Hole Size: #10 (5mm)3/8".
  • Compact, high-amp fuse—appropriate for DC Main, inverter, windlass, and bow thruster circuit protection.
  • Weatherproof – suitable for small open-cockpit boats and other harsh environments.
  • Insulating cap prevents accidental shorts.
  • Ignition protected when used with MRBF fuses.
Check Stock

Fuse Holders Inverter Circuit Breaker Car Audio Solar Energy Inline Circuit Breaker Fuse Inverter With Waterproof Cover for Motor Auto Car Marine Boat 300A

  • Suitable for car audio/video system, Boat, trucks, buses, RV's, ATV Winches and marine and DC sound amplifier system overload protection.
  • Built-in High Current Terminal Blocks,Stops Power Surges From Damaging Your Amps,Save Your Money to Replacing Fuses.
  • New design Manual Reset Circuit Breaker 80A-300A for choose and Compatible with all 12, 24 Volt Systems.
  • Unique Push Button Reset and Save Your Money to Replacing Fuses, 0-4awg Wire gauge.
  • One year warranty. Your satisfaction is our priority, any questions about our item, feel free to contact us.
Check Stock

Blue Sea Systems 5026 ST Blade Fuse Block 12 Circuit with Ground and Cover

  • Blue Sea Systems Fuse Block ST Blade 12 Circuit with Ground and Cover, part number 5026, can be used for 24-hour circuits.
  • Max Amps: 100A per block, 30A per circuit, Max Volts: 32V DC, Mounting :#8 (M4) Screw, Negative bus: #10-32 stud, Positive bus: #10-32 stud, Recommended Stud torque: 24 in-lb, Screw Terminal Torque: 18in-lb, Screw terminal type: #8-32 screws with captive star lock washer.
  • Positive distribution bus with #10-32 stud.
  • Clear insulating cover with label recesses and storage for two fuses, satisfies ABYC/USCG insulation requirements and has a push button latch that is easy to open.
  • Accepts ring or spade type terminals and ATO/ATC fast acting blade fuses - fuses sold separately. Includes 20 write on circuit labels.
Check Stock

CT Sounds 1/0 Gauge CCA Complete Amp Wiring Install Kit AMPKIT-0GA-PRO

  • 17ft (5.5 meters) OFC 2-channel dual twisted-pair construction RCA interconnect cable, with black nylon wire loom and satin chrome tips. 17ft (5.5....
  • 3ft (.95 meters) Premium True-spec 0 Gauge OFC black ground wire with seamless ring terminal. 20ft (6.4 meters) OFC 18 Gauge remote turn on lead wire.....
  • One brass ANL/Mini-ANL Fuse-holder with 200A ANL fuse offers ideal protection for high powered systems.
  • 1pc 150A and 1pc 300A ANL fuses are included. One black rubber firewall grommet. Two 8 Gauge nickel plated spade terminals with red/black boots.
  • Four 16 Gauge spade terminals with red/black boots. Four 12 Gauge speaker terminals. Two Red 18 Gauge butt connectors. 10pcs 6” Black zip ties and....
Check Stock

Blue Sea Systems 5129 Fuse ANL 200-AMP

  • Wire Gauge:- It can securely hold the fuse and use it with 1/0,2,4AWG Ring Terminals..
  • Application：These inline fuse will protect your controller, wire, and battery from overcurrent，suitable for auto car, boat ，truck audio video systems or other vehicles..
  • Material：ANL fuse made of copper alloy and gold plating on the surface, durable and reliable to use, heat resistant, melting resistance and good conductivity, clear cover and holder features transparent design, allow you to visually see the operation of the fuse, waterproof cover protect the internal fuses from water and further damage..
  • Notice：Because the fuse will be damaged during transportation, the fuse and fuse box are packed separately and can be used after simple installation after receiving the goods..
  • Package:2pcs ANL Fuse+2pcs ANL Holder+4pcs Copper Ring Terminal+4pcs Heat shrinkable tube.
Check Stock

VORCOOL ATO ATC Standard Blade Fuse Holder with 20A Blade Fuse for Car Pack of 4

  • The flat plug fuse 20A with cable for power tap directly on the fuse..
  • These backups can be used in current vehicles that have installed no ignition or permanent plus terminal in the radio slot..
  • Max. System capacity up to 20A. Max. voltage: 32V..
  • Applicable safety: ATO ATC Standard 6.3mm blade fuses..
  • Cable wire: UL1015 16 AWG Red. Length: approx. 110mm..
Check Stock