Reviews Wire Mounting Bracket

White Gridwall Mount Brackets, Economical Grid Panel Flush Mounting Clips - 20 Pack

  • Use our gridwall mounting clips to easily mount & secure your grid panels flush against your wall. Our mounting brackets come in a white finish and will hold grid panels with up to 1/4" thick wire..
  • Simply place the grid against the wall, secure the bracket across the wire & screw it into the wall. The bracket mounts have a small half circle loop that goes over the wire. No screws are included..
  • They measure .5" H x .78" L and have a 1/5" diameter hole so you can easily screw the panel into your wall..
  • NOTE: These clips need to be screwed directly into the stud of your wall. They may not securely hold your panel if it's screwed into sheet rock. We recommend at least 10 clips for a 2' x 6' panel..
  • 20 mounting brackets are included in this order..
Check Stock

Wall Bracket for Gridwall - Use to Mount Wire Grid to Wall BLACK Lot of 50 NEW

  • Use our gridwall mounting clips to easily mount & secure your grid panels flush against your wall. Our mounting brackets come in a black finish and will hold grid panels with up to 1/4" thick wire..
  • Simply place the grid against the wall, secure the bracket across the wire & screw it into the wall. The bracket mounts have a small half circle loop that goes over the wire. No screws are included..
  • They measure .5" H x .78" L and have a 1/5" diameter hole so you can easily screw the panel into your wall..
  • NOTE: These clips need to be screwed directly into the stud of your wall. They may not securely hold your panel if it's screwed into sheet rock. We recommend at least 10 clips for a 2' x 6' panel..
  • 20 mounting brackets are included in this order..
Check Stock

Linkitom Magnetic LED Trailer Towing Light Kit, 24ft Cable with 7 pin plug, IP68 Waterproof, DOT Approved

  • A MUST FOR 80" OR WIDER TRAILERS - Trailers measuring 80" or wider require identification lights for additional visibility.
  • mount this clearance light bar on the top of your truck/trailer or between the taillights to draw extra visibility to your wide trailer for added on-road safety..
  • DOT-CERTIFIED REFLECTIVE LENS - Unlike cheaper, inferior quality ID bars, our unit boasts a DOT FMVSS-108 rated reflective lens design compliant with all relevant laws and regulations..
  • IP67 SUBMERSIBLE RATED - Waterproof and entirely-submersible for unparalleled all-weather usability.
  • mounting bracket features water drainage notch for added protection..
  • SOLID CONSTRUCTION - Black bracket is made of long-lasting stainless steel, NOT substandard plastic like other light bar brackets. Stainless hardware included..
  • STRAIGHT-FORWARD INSTALLATION- Mounting bracket features notches on its short sides for easy wire routing.
  • positive input wire and ground wire are attached.
Check Stock

BestMounts Single Gang (1-Gang) Low Voltage Mounting Bracket (12 Pack)

  • PACKAGE INCLUDE: 12 Pack - Single Gang Low Voltage Bracket.
  • COST-EFFECTIVE 12-PACK of low voltage mounting brackets is enough for a few renovation projects at home or in the office.
  • EASY TO INSTALL - Fully adjustable, ideal solution for mounting low voltage wires (phone, internet, TV, video).
  • Adjusts to fit various wall thickness, the bracket wings secure when mounting screws are tightened.
  • Drywall Horizontal or vertical mounting. Great for Wire Brush, Pass Through Holes.
Check Stock

Dr.Acces Golf Cart Rear View Mirror with LED Turn Signal | Golf Cart Side Mirror with LED trun Signal Fits EZ-GO Club Car Yamaha etc Most Golf Cart

  • Universal Side Mirror with LED Turn Signal including Installation instructions, 180° extra Adjustable wide panoramic.
  • Installation Step 1:Find desired mounting location and mark with a marker. Drill 2 small 1/8” holes in strut for mounting hardware. Drill 1/4” hole for wire. Or run your wires down strut, secure wires using mounting ties..
  • Installation Step 2:Using a wire snake feed wires in through strut and out the bottom..
  • Installation Step 3: Loosen hardware to mount LED mirror Bracket using supplied hardware. Reattach mirror to bracket using hardware from and tighten at desired mirror location..
  • Installation Step 4: a.Up-plug head-light. Use a multi meter to find power and ground for the blinker. This will supply power to the LED mirror. To do this engage blinker on turn signal, the pin that shows 12V flashing is your blinker 12V(+). b.Attach Red wire to the wire found on the harness that showed 12V(+) flashing in step 3 using a Splice Wire Connector and secure.Re-attach harness to Headlight and repeat steps 1-7 on opposite side..
Check Stock

Vertically Driven 792501 6 Speaker Upholstered Sound Bar Wrangler 87-02

  • Includes 2 Long mounting bracket (1997-2003 TJ) , 2 Short mounting bracket (1987-1996 YJ) , 4 M6-1.0 x 3/4 Screw/Bolt , 4 5/16” x !: Sheet metal screw , (4) 5/16” x ! Flat washer , (4)5/16” x ! Lock washer , (1) Wire Harness – 10’ Long.
Check Stock

Ring Spare Parts Kit for Floodlight Cam Wired Pro, Black

  • Everything you need to set up your Ring Floodlight Cam Wired Pro in just a few minutes..
  • Includes a screwdriver, mounting bracket, mounting screws, screw caps, metal crossbar bracket, and wire nuts..
  • Only works with Ring Floodlight Cam Wired Pro..
Check Stock

BWP Single 1-Gang Drywall Bracket Face Wall Plate Mount Mud Ring Low Voltage Mounting Bracket (1 Gang, 12 Pack)

  • PACKAGE INCLUDE: 12 Pack - Single Gang Low Voltage Bracket.
  • COST-EFFECTIVE 12-PACK of low voltage mounting brackets is enough for a few renovation projects at home or in the office.
  • Adjusts to fit various wall thickness, the bracket wings secure when mounting screws are tightened.
  • EASY TO INSTALL - Fully adjustable, ideal solution for mounting low voltage wires (phone, internet, TV, video).
  • Drywall Horizontal or vertical mounting. Great for Wire Brush, Pass Through Holes.
Check Stock

Lumitronics License Plate Lamp Light with Bracket for Trailers, Boats, Cars, Trucks, RV, and Cars

  • DESCRIPTION: License plate light with grey coated plastic housing & steel license plate bracket.
  • FEATURES: Mounting ears for surface mount and 6.8 Lumens.
  • DESIGN: Single wire design grounds through mounting hardware and attaches to the bolt or bracket.
  • INCLUDED: Gasket for weather-tight seal. Replaceable bulb.
Check Stock

diyTech Premium 6 Speaker Wall Plate, Speaker Wire Wall Plate, Supports 6 Speaker Configurations, w/Mounting Bracket, 1 Gang Screwless - White

  • SIX (6) SPRING LOADED SPEAKER PORTS - Our premium speaker wire connectors are far superior and much easier to use than traditional banana plugs and support up to 6 speaker setups. It accepts up to 12 gauge speaker wire, for that crisp high-fidelity surround sound experience..
  • EASY TO USE - Each spring loaded speaker connector provides quick and easy speaker wire installation. No need for additional products or tools. No need to purchase additional banana binding plugs, simply push and play. They provide a more secure connection and better audio reproduction than traditional banana binding post wall plates..
  • MOUNTING BRACKET INCLUDED - With our quality low voltage mounting bracket, you can get up and running quickly..
  • SUPERIOR QUALITY & BEAUTIFUL DESIGN – Our speaker wall plate isn't just functional, but stunningly beautiful and built to last for years of worry-free use. All screw hardware is hidden using a ridiculously easy snap-in installation, to give you that beautiful and professional look..
Check Stock

Nilight TL-11 1PC Red 9 LED ID Bar Marker Tail Black Stainless Steel Bracket for Truck Trailer Boat Identification Light, 2 Years Warranty

  • Enhanced Visibility and Safety: For your trailer 80” or wider that requires identification light, the ID bar marker light mounted on the top or between the taillights draws extra visibility for the wide range, makes the light more eye-catching to warn the upcoming car. Enhance your on-road safety.
  • Top LED Quality: 9 upgraded Piranha LED, which feature wider lighting angle, higher intensity light, and better heat dissipation, is used on the trailer light to make it very durable and output bright light without glare.
  • Ready For All Weather Abuse: IP67 waterproof sonically welded light housing, durable ABS cover and the anti-corrosion black base bracket, make the lightly well protected to withstand all weather abuse.
  • Considerate Design for You: Comes with 2 wire leads for straight forward electrical connection, red wire to positive, black wire for negative. Mounting bracket also features notches and carefully added glue at the back for easy wire routing and perfect surface mounting.
  • Universal for any 12V vehicles more than 80” wide like trucks, pickups, travel trailer, boat trailer, horse trailer, camper trailer, cargo trailer, RV, SUV Motorhome etc. Package Include: 1x trailer light bar, 1x hardware pack.
Check Stock

12V Magnetic Towing Trailer Light Kit Amber/Red

  • Multi-functions Each light has 11 high quality LED outputs high brightness and low brightness Can functions perfectly as parking light stop light turn signal light tail light and brake light.
  • Highly Sealed & durable The front Polycarbonate lens is sonically welded to the housing and the back wire lead is add on glue to make sure the light is completely sealed Waterproof enough to withstand all weather abuse.
  • Easy Wire Connection For wire connection white wire for ground black wire for low brightness tail light and red wire for high brightness brake light.
  • Light Bar Mounting To flush-mounting the light one option is to drill a center hole or use the existing hole to go through the back wire lead and then fix the two ends by drilling in the two screws provided The other option is to add some washer when fixing the two ends or use a bracket to mount the light to avoid drilling holes for the back wire lead.
  • Wide Application Can be perfectly used on most 12V heavy duty trucks, semi trailers, cargo trailers, boat trailers, travel trailers, horse trailers, RV camper work vehicles, etc. Package Include 2PCS trailer marker ID bar with 2 hardware pack.
Check Stock

2-Digit Take A Number System with Free Ticket Roll

  • 1 Microframe Model 5120 2-Digit LED Display with Power Adapter and 18ga, Two conductor wire. | 9.1-inch LED Display with 5.5-inch digits..
  • 1 B80 Ticket Dispenser with mounting bracket and hardware. | 1 Take-A-Number Sign.
  • 1 B80 Ticket Dispenser Counter Top Stand with mounting hardware..
  • 1 Roll of White 2-Digit Tickets (3,000 tickets per roll) | 2 Brass Push Buttons with 40 feet of 22ga, Two conductor wire. | 1 Wireless infrared remote control (batteries included)..
Check Stock