Reviews Wire Guide Tube

OriGlam 250pcs Single Barrel Crimp Sleeves Kit, Copper Barrel Crimp Sleeves Copper Tube, Fishing Line Leader Rigging Tackle, Wire Rope Tube Connector Kit for Leader Rigging

  • √ High Quality - Made of high grade copper material which is durable, sturdy, anti-corrosive. These are excellent for use with big leader material and can also be fitted to wire leader and other various lines..
  • √ High Corrosion Resistance - Nice for mono, wire leader, making trolling and bottom fishing rigs. Burr-free non-abrasive finish combined with high strength and corrosion resistance makes sleeves..
  • √ 5 Sizes - 1.8*0.8mm(50pcs), 2.0*0.8mm(50pcs), 2.2*0.8mm(50pcs), 2.4*1.0mm(50pcs), 2.6*0.8mm(50pcs). Single oval copper tube 5 different sizes mixed..
  • √ Feature With - When properly applied, are capable of holding the rated breaking strength of the cable to which they are applied. Easy to use, without effort, just lock both ends of the guide wire by vise, pliers or compression tools..
  • √ Great For - Fishing Line Tube Connectors are great for use with any size monofilament and wire leader or other leader materials to ensure a firm hold, also suitable for dog leashes, clothes lines or anything else that require strong cable, can meet your different needs in daily life..
Check Stock

Cobra Products 49360 TELESCOPIC TOILET AUGER, Yellow, Black

  • Telescopic Toilet Auger 1/2 In. X 3 Ft. To 6 Ft.
  • 1/2-inch x 6-foot High Carbon spring wire.
Check Stock

Orion 7382 Guide Scope Ring Mounting Bar

  • Rigid anodized aluminum bar used for coupling guide scope rings to an astrophotography telescope.
  • Attach guide scope rings to this mounting bar, then attach bar in piggyback orientation to imaging telescope.
  • Multiple holes along length of mounting bar allow rings to be positioned for long-tube or short-tube guide scopes.
  • Pre-drilled holes allow easy attachment to Orion SkyView Pro, Sirius, and Atlas mounted telescopes with tube rings.
  • Astrophotography telescope must be equipped with tube rings in order to attach guide scope ring mounting bar.
Check Stock

KOTTO Ferrule Wire Terminal Block Crimping Tool Plier Tool Kit Set with 860 Ferrules, Wire cutter, Storage Bag, UL Color AWG Guidelines, Industry Standard Coded Ferrules

  • Complete Crimp Tool Kit – Each set comes with a crimping tool, Wire Cutter, and 860 pieces insulated wiring terminals to support small DIY projects and large electrical repairs..
  • The ferrule crimping tool range is 0.25-10mm²/ 26 - 8 AWG, suitable for most typed insulated, non-insulated sleeve terminals and connectors. While our wire cutter and stripper is compatible with 10-22 AWG solid core and stranded wires..
  • Our ferrules are compliant with the industry-standard guide for color coding and wire AWG size. Many products assign random colors, but we follow the UL industry-standard color coding and AWG guide for compliance. We do the research of each of our tool packs to follow the industry set guidelines..
  • Ferrule sleeves are made of high-temperature polypropylene, and the tube is made of corrosion-resistant tin-plated copper..
  • Our steel crimper features non-slip, ergonomic handle design labor-saving ratchet device provides improved gripping power. Ratchet type linkage mechanism allows for automatic and precise crimping as well as one-handed operation. Making the operation easier, faster, and more reliable..
Check Stock

Swpeet 67Pcs Universal Bicycle Shifter Cable Housing with Bike Cable Cutter Kit, Brake Shift Cable End Caps Tube S Buckle Inside Tail Caps and O-Rings Perfect for Bike Bicycle

  • 6Pcs General Front Shift Cable Wire (1.7 m).
  • 1Pcs General Rear Brake Cable Wire (2.1 m).
  • 2Pcs V Bike brake noodle cable guide pipe.
  • Heavy Duty Stainless Steel Bike Cable Cutter ----- This cable cutter made of Chrome Vanadium (CR-V) steel and has been hardened by high-frequency quenching. Works excellent in cutting up to 5/32" cable of all kinds. Meanwhile, The safety lock prevents accidental opens and cuts that might hurt you..
  • Black Thread tube S buckle and C-clip with V Bicycle Brake Noodles Cable ----- The cable end crimp prevents to be scratched by the cable end and keep cable ends nice and tidy, the silicone O-ring keeps your bike from the grind lacquer. These cables can be cut into suitable length for bike to meet your needs. All required end caps & cable tips. Made of rubber tube with a plastic pipe, reduce friction brake line, effectively protect the brake line..
Check Stock

iJDMTOY Smoked Lens Towing Hitch Cover Fit 3-In-1 LED Rear Fog Light Kit Compatible With 2020-up Tesla Model Y Rear Fog/Tail Light F1 Strobe/Flash Brake Sequential Turn Signal

  • Compatible with 2020-up Tesla Model Y w/ rear center tow hitch package.
  • Dark smoke lens V-shape 3D concept LED tube with F1 style strobe/flash stop/brake mode and left/right dynamic sequential blink turn signal features.
  • Utilize the rarely used rear bumper tow hitch's cover panel and convert it with full LED lighting with an unique and awesome appearance.
  • Direct clip on installaion with no modification required!.
  • green wire: V-shape tail running light (aka rear fog light).
  • red wire: center triangle F1 style brake/stop warning light.
  • yellow wires: left and right scrolling sequential blink turn signal light.
Check Stock

Jagwire Workshop Internal Routing Tool Bike Tool Black 2017 Bike Tools kit, Noir, One Size (WST050)

  • EFFICIENCY: uses a rare earth magnet that attaches directly to cables, housing, hydraulic hose, and electronic shifting wire, and can be fed directly though difficult internal setups without the need for a separately routed lead wire.
  • WARRANTY: Limited 2-Year * against defects in materials and workmanship. * only applies to original owner and proof of purchase is required..
  • Jagwire's Pro Internal Routing Tool simplifies routing through a frame, using powerful magnets to safely and easily guide cables, housing, and e-shift wires. A retractable, flexible magnet can be inserted into the receiving end of an internal cable run to find the magnetic adapter and easily pull it through. Adapters for inner cables, hydraulic hose, and Di2 e-Tube wires are included. The adapters nest neatly inside tool body when not in use..
  • : Limited 2-Year * against defects in materials and workmanship. * only applies to original owner and proof of purchase is required..
Check Stock

ONLYLUX 8 Foot Led Lights, F96T12 8ft Led Bulbs Fluorescent Replacement, T8 T10 T12 96" 45Watt FA8 Single Pin LED Shop Lights 5400LM, Ballast Bypass, 6000k, Workshop, Warehouse, Clear Cover(12 Pack)

  • BRIGHT, ENERGY SAVING - This 8ft led bulbs are 45W energy saving, replace 100W fluorescent tube, with above 5400 lumens output, Save 65% on your electricity bill..
  • EASY BALLAST BYPASS INSTALL - ONLYLUX 8ft LED tube lights are dual-end powered and require a simple, energy-saving, ballast bypass (direct wire) installation. Refer to our installation guide for details..
  • FLUORESCENT TUBE REPLACEMENT - ONLYLUX LED tubes are ideal for 8ft fluorescent replacements. They are compatible with existing T8, T10, and T12 fluorescent fixtures, making LED conversion easier than ever. Retrofit your garage, warehouse, and more..
  • SAFT ASSURANCE - The 8ft led tubes are ETL Qualified. Safe and reliable..
  • 5 YEARS WARRANTY - Easy and fast replacement is offered if any quality issue.Contact our customer service team 24/7!.
Check Stock

Hyperikon T8 T10 T12 8ft LED Tube Light, 36W (75W Equiv.), Dual-End Powered, Ballast Bypass, Shatterproof, Fluorescent Replacement, 4000k, Frosted, 4200 Lumens, Workshop, Warehouse, Garage - 12 Pack

  • ✔ BRIGHT, HIGH OUTPUT LED –  Illuminate your space with 4000+ lumens! See things in a new light when you replace old fluorescent tubes with super bright, high output 8ft LED tubes..
  • ✔ LONG-LASTING TUBES – Our shatterproof 8ft LED tube lights have an outstanding life rating of 45,000+ hours! These tubes can last 20+ years depending on use, eliminating maintenance costs and reducing relamp frequency..
  • ✔ EASY BALLAST BYPASS INSTALL – Hyperikon 8ft LED tube lights are dual-end powered and require a simple, energy-saving, ballast bypass (direct wire) installation. Refer to our installation guide for details..
  • ✔ FLUORESCENT TUBE REPLACEMENT – Hyperikon LED tubes are ideal for 8ft fluorescent replacements. They are compatible with existing T8, T10, and T12 fluorescent fixtures, making LED conversion easier than ever. Retrofit your garage, warehouse, and more..
  • ✔ BEST-IN CLASS-WARRANTY – Hyperikon’s hassle-free UNLIMITED 5 Year Warranty is unrivaled in the commercial lighting industry and covers all of our T8 8ft LED tubes. Contact our customer service team 24/7!.
Check Stock

PetsTEK 10 Pack Waterproof Wire Splice Kit for Wire Break Repair in Electric In-Ground Dog Fence Systems

  • PetsTEK Wire Splice Kit for Electric In-Ground Dog Fence Systems. Compatible with All PetSafe, SportDog and Dogtra Underground Fence Systems..
  • Package Contains 10 Wire Splice Kits – 10 Tubes, 10 Wire Nuts and the Instruction Card..
  • The Tube is Filled with Waterproof Gel, That Protects Exposed Wires from Rust and Corrosion..
  • The Kit is Designed to Work with 12, 14, 16, 18 And 20 Gauge Wires. Total Tube Length (including the cap) – 2.68”, Inside Tube Diameter - .5”..
  • PetsTEK Waterproof Wire Splice Kit is Made in the USA..
Check Stock

StripMeister E250 Electric Automatic Wire Stripping Machine

  • REVOLUTIONARY! Ultra Grip wire feeder lets you effortlessly strip pinched, kinked, damaged, pig-tail spiraled and candy caned wires on the first pass without slippage or jams.
  • PRACTICAL! Quick switch built-in adjustable wire guide provides you the ability to always have the right size wire guide at your fingertips which means you can remove every bit of the insulation from #18 wire to 250 MCM including ROMEX and braided (stranded) wire - Easily.
  • EXTREMELY EASY TO USE! Blade depth reference indicator lets you set the perfect wire insulation cut... faster and easier than ever before.
  • SUPERIOR PERFORMANCE! Automatic wire stripper allows you to continuously strip your wires at variable speeds - without hand cranking or a drill.
  • BREAKTHROUGH! Aircraft grade aluminum construction and heat treated stainless steel hardware lets you feel confident that your wire stripper will last a lifetime.
Check Stock

Astromania Adjustable Guiding Scope Rings 102 mm Inside Diameter (Pair) - for Telescope Tube Diameter or Finders 48 to 100mm

  • The inner diameter of the tube rings is 102 mm for Telescopes between 48 to 100mm tube diameter can be mounted adjustable..
  • The adjustment crews have teflon inlays for avoiding unaesthetic scratches and pressure marks on the telescope while still ensuring reliable clamping..
  • Solid metal guide scope rings for compact telescopes and finders with flat support surface and knurled metal screws..
  • At the base, the rings have a flat surface with four female M6 threads (Inner pair 20 mm - outer pair 38 mm) for easy adaption to dovetail bars or dovetail clamps. Big screws with maximum grip allow easy use - even with gloves..
  • Set: pair of two tube rings made of metal.The Astromania guide scope rings are suitable for small and medium-sized guiding telescopes.Ideal for astrophotography for mounting a guide scope parallel to the main telescope..
Check Stock

SVBONY SV182 Finder Scope, 6x30 Metal Finderscope, for Astronomy Telescope, with Crosshair and Bracket

  • the guide scope rings are suitable for small and medium-sized guiding telescopes.
  • 70mm compact deluxe finder guidescope kit.
  • ideal for astrophotography for mounting a guide scope parallel to the main telescope.
  • The mounting bar has two M6 through-holes on both sides for easy adaption to rings. and three threaded through-holes.
  • the center hole has 1/4"-20 threads and the two larger holes on either side of center have M8 x 1.25 threads.
  • Solid metal guide scope rings for compact finderscope or guidescope with knurled metal screws. big screws with maximum grip allow easy use - even with gloves.
  • The adjustment crews have teflon inlays for avoiding unaesthetic scratches and pressure marks on the telescope while still ensuring reliable clamping.
  • The inner diameter of the tube rings is 70 mm for telescopes between 43 to 70mm tube diameter can be mounted adjustable.
Check Stock