Reviews Windshield Wiper Arm Tool

OTC 4676 Windshield Wiper Puller

  • Safely removes wiper arms on a wide variety of foreign and domestic Cars, SUVs, Vans, and Light Trucks.
  • Engineered to ensure no damage will occur to wiper arm hood or cowling during wiper arm removal.
  • Simply place puller feet under wiper arm and tighten forcing screw against wiper shaft to remove the wiper arm.
  • Tool features a throat depth of 1-1/16 inches.
  • foot spacing accomodates wiper shafts up to approximately 5/8 inch diameter.
  • Features a rugged metal frame and forcing screw with rounded tip to engage small depression on windshield washer shaft or loosened nut - keeping the screw centered on the shaft for optimum performance.
Check Stock

VCT Wiper Arm Battery Terminal Removal Tool Bearing Arm Removal Remover Puller New

  • Ideal tool to remove stuck on wiper arms that haven't been taken off for years..
  • The heavy duty construction with locking feature allows the tool to be fastened securely to the wiper arm before commencing the pull.
  • The sprung loaded arm ensures a perfect grip, pulling the wiper arm squarely off every time..
  • It can remove bolted-on windshield wiper arms that fit over a tapered spline. Can also be used for removing over tight battery terminals and some alternator bearings..
  • SPECS: With swivel mounted thrust bearing and tommy bar Maximum opening: 36mm Maximum pull height: 27mm.
Check Stock

Windscreen Wiper (Revisited)

  • ▶Product Model name : Front Passenger Side Windshield Wiper Arm (4L1955408B Windscreen Wiper Arm).
  • ▶ Replace OE : 4L1955408B1P9, 4L1955408B.
  • ✔ Product Dimensions: 27.1 x 5.54x 3.4 inch , Package Includes: 1 x Front Passenger Side windshield wiper arm for AUDI Q7..
  • ▶ Fitments: For AUDI Q7 2007 2008 2009 -- 2015 2016. Please Compare The Part Number With Your Original One Before Purchasing! Only fit for Left Hand Drive Car wiper arm.
  • ▶ Quality Assurance: 18 month WARRANTY. offers a 30-day unconditional refund for a truly worry-free shopping experience.
Check Stock

ATPEAM Battery Terminal and Wiper Arm Puller Remove Tool Heavy-Duty Arm Bearing Remover Puller Repair Tool Kit 6-28 mm

  • Great Material: Made of 45 # carbon steel, strong metal with special heat treatment process, high hardness, corrosion-resistant forged and heat treated steel jaws, can serve for long time.
  • Size: Jaw opening: 1/16" - 1-1/16" (6-28mm).
  • Easy to Use: Tighten knurled cone to force jaws under the cable clamp, turn center screw to lift clamp off terminal, the puller screw pad is designed to fit the top of the spline post for easy pulling..
  • Multifunction: Windshield Wiper Removal Tool is also can be used to remove bolted-on windshield wiper arms that fit over a tapered spline..
  • Package Included: 1 x Wiper Arm and Battery Terminal Bearing Remover Puller Tool.
Check Stock

Bosch 18OE Bosch ICON Wiper Blade

  • See Description For Full List of Vehicles This Item Fits.
  • Wiper and Washer --> Windshield Wiper Arm.
Check Stock

Bosch 28BOE Bosch ICON Wiper Blade

  • See Description For Full List of Vehicles This Item Fits.
  • Wiper and Washer --> Windshield Wiper Arm.
Check Stock

Kemimoto Electric Windshield Wiper Motor Kit，For Most UTV Compatible with Can Am Defender Pro & Compatible with Mule Teryx 16" 12V Wiper Blade

  • ☔Feature: Features about 90-degree sweep and can be wired together in tandem by using an external switch if you want a dual wiper system..
  • ☔Size: 16" Rubber Blade and 18" from the center for the handle to the end of the UTV windshield wiper. Please check the size to make sure that the UTV electric windshield wiper kit won't be too long for your windshield..
  • ☔Fitment: Electric kemimoto window windshield wiper motor kit for UTVs is universally compatible with Most UTVs, such as compatible with Polaris RZR Ranger 570, 900, 1000 and compatible with General, Compatible with Maverick X3 all models, Compatible with Commander 800, 1000, Compatible with Massimo, Compatible with Axis 500 and Defender all models. The list will go on..
  • ☔Installation positions: 12V kemimoto windshield wiper motor can be mounted to the header panel above the windshield and also be installed at the left corn of the windshield. The installation video has been uploaded on the page if you have any inquiries about installing..
  • ☔Package: includes One windshield wiper motor, one blade, one windshield wiper arm, and hardware. If you have any inquires about an electric windshield wiper kit for UTV, Do not hesitate to contact us..
Check Stock

Bosch ICON 17OE Wiper Blade Up to 40% Longer Life - 17 Pack of 1

  • See Description For Full List of Vehicles This Item Fits.
  • Wiper and Washer --> Windshield Wiper Arm.
Check Stock

Kemimoto UTV Windshield Washer Reservoir with 12V Windshield Wiper Motor Kit Compatible with Polaris RZR Ranger General Can Am X3 Defeder Commander Golf Cart

  • Kemimoto 90 degrees UTV windshield washer reservoir with 12V electric windshield wiper kit can be widely used in UTVs. Windshield washer wiper Kit universal compatible with Polaris RZR, Ranger 570 900 1000, Commander 800, 1000, Defender all models, Maverick X3, Maverick, Pioneer 1000, and golf cart..
  • 18" Ranger windshield wiper kit from the handle to the end of the wiper and has 16" rubber blade. Make sure that you measure the size of the windshield in case the wiper may be too long for the windshield. Do not fit for full windshield with black frame..
  • The universal washer pump is designed to fit most wash pumps and it works into the bottom of the fluid tank. However, it will not be filled automatically, and DO NOT USE soap water..
  • Installation for the washer fluid tank is easy but some tools are needed. Do not need to drill or trim. In addition, the installation steps for the electric UTV windshield wiper kit are shown in the picture. You may need to drill a 1/2" hole in the windshield to mount the motor on..
  • The package comes with one windshield wiper motor, one blade, one windshield wiper arm, a water pipe, one water pump, and hardware needed. We provide after-sale service for customers, please feel free to contact us if you have inquiries about the pr....
Check Stock

Dorman 42591 Windshield Wiper Arm Compatible with Select Jeep Models

  • Direct replacement - this windshield wiper arm is designed to match the fit and function of the original arm on specified vehicles.
  • Restores functionality - reliable replacement for an original wiper arm that has failed due to spring wear, snow damage, or metal fatigue.
  • Durable construction - this part is made from quality materials to ensure reliable performance and long service life.
  • Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

X XINDELL Car Window Cleaner – 24Inch Windshield Cleaning Tool with Spray Bottle, Microfiber Bonnets – Extendable Car Washer Kit with Long Soft Sponge Handle

  • ◁▶Suitable for many cars and commercial vehicles, fit for Astra G/Zafira B/Corsa C/Vectra C/Touareg, fit for Cheyenne and other SUV..
  • ◁▶Car wiper arm removal tool, heavy execution force can loosen the tightest arm of the wiper..
  • ◁▶The spindle end has a brass cover to prevent damage to the windshield wiper arm..
  • ◁▶With hard plastic toolbox and professional design is very convenient to use..
  • ◁▶Strict quality control and quality assurance, high safety factor, can be used with peace of mind..
Check Stock

Vautoparts Wiper Arm Puller Battery Terminal Puller - Wiper Arm Bearing Removal Tool Kit Wiper Ball Rama Car Repair Demolition Wipers Special Handling Tools Two Claw Puller Adjustable Versitile Clamp

  • This wiper arm puller is a perfect tool for removing the wiper arm stuck on the arm for years..
  • Tighten the knurled cone to force the jaws under the cable clamp, dual purpose use..
  • Turn the center screw to remove the clamping device from the terminal and remove the bolt-on windshield wiper arm mounted on the tapered spline.
  • Dimensions:12CM x 8.5CM x 3.6CM(4.72in * 3.35in * 1.41in). Jaw opening: 1/16" - 1-1/16" (6-28mm).
Check Stock

Dorman 42551 Rear Windshield Wiper Arm Compatible with Select Cadillac / Chevrolet / GMC Models

  • Direct replacement - this windshield wiper arm is designed to match the fit and function of the original arm on specified vehicles.
  • Restores functionality - reliable replacement for an original wiper arm that has failed due to spring wear, snow damage, or metal fatigue.
  • Durable construction - this part is made from quality materials to ensure reliable performance and long service life.
  • Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock