Reviews Windshield Wiper Arm Puller Heavy Duty

TMC FO1596 Heavy Duty Stainless Steel Dual Pantographic Windshield Wiper Arm, Extendable from 11-1/4 in (286mm) to 15 in (381mm), for FO-746 Wiper Motor

  • This TMC Dual Windshield Wiper Pantographic Arm allows the wiper blade to remain in a vertical orientation, sweeping a more useful pattern on the windshield..
  • Adjustable Marine Wiper Arm 11-1/4 inches to 15 inches (286mm to 381mm). These TMC arms are used on standard and heavy-duty motors..
  • Made of AISI316 Stainless Steel corrosion-resistant and Black Matte coated. It comes with a Hex Key to be Adjust..
  • Requires a heavy-duty motor with a 9/16 in (14mm) shaft..
  • For Use with Five Oceans Code FO-746 (Wiper Motor).. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.
Check Stock

AMRA-30004 AFI 500 Wiper Kit - 80 Degree Sweep Set

  • The AFI 500 Wiper Motor Kit consists of a waterproof standard wiper motor, a stainless steel curved wiper blade and an adjustable stainless steel arm. AFI's 500 Wiper Motor is enclosed in a waterproof, thermoplastic housing, and is designed for exterior installation..
  • Draws 2 AMPs max power, and features self-parking wipers that return to the off position automatically. This motor is a standard motor, and is designed for light duty use. Runs on 12V power..
  • The 11.5" deluxe stainless steel curved wiper blade works well on curved or flat windshields and features a marine-grade silicone squeegee. The deluxe adjustable stainless steel arm has an articulating/bend-back feature, and is designed for use on standard and heavy-duty motors..
  • Kit Includes: 500 Waterproof Wiper Motor. 11.5" Deluxe Stainless Steel Curved Wiper Blade. Deluxe Adjustable (6.75" - 10.5") Stainless Steel Arm.
  • Features: 12V. 80 Degree Sweep. Self-parking. Windshield Mount 0.5" shadt diameter.
Check Stock

ATPEAM Battery Terminal and Wiper Arm Puller Remove Tool Heavy-Duty Arm Bearing Remover Puller Repair Tool Kit 6-28 mm

  • Great Material: Made of 45 # carbon steel, strong metal with special heat treatment process, high hardness, corrosion-resistant forged and heat treated steel jaws, can serve for long time.
  • Size: Jaw opening: 1/16" - 1-1/16" (6-28mm).
  • Easy to Use: Tighten knurled cone to force jaws under the cable clamp, turn center screw to lift clamp off terminal, the puller screw pad is designed to fit the top of the spline post for easy pulling..
  • Multifunction: Windshield Wiper Removal Tool is also can be used to remove bolted-on windshield wiper arms that fit over a tapered spline..
  • Package Included: 1 x Wiper Arm and Battery Terminal Bearing Remover Puller Tool.
Check Stock

VCT Wiper Arm Battery Terminal Removal Tool Bearing Arm Removal Remover Puller New

  • Ideal tool to remove stuck on wiper arms that haven't been taken off for years..
  • The heavy duty construction with locking feature allows the tool to be fastened securely to the wiper arm before commencing the pull.
  • The sprung loaded arm ensures a perfect grip, pulling the wiper arm squarely off every time..
  • It can remove bolted-on windshield wiper arms that fit over a tapered spline. Can also be used for removing over tight battery terminals and some alternator bearings..
  • SPECS: With swivel mounted thrust bearing and tommy bar Maximum opening: 36mm Maximum pull height: 27mm.
Check Stock

Bosch 15' Clear Advantage Beam Wiper Blade (2 Pack)

  • Compatible: Wiper trim cover fit for Jeep Wrangler JL JLU & Gladiator JT 2018 2019 2020 2021.
  • Package: 2* Front window windshield wiper arm blade trim, 1* rear window windshield wiper arm blade trim.
  • Excellent Appearance: The window windshield wiper arm add a variety of colors to your car, while also protecting your car from nails, keys, small stones while driving, covering existing scratches, wiper arm paint, loss of gloss, etc. Exterior Problems.
  • Easy to Install: The window windshield wiper arm just stick on the wiper arm with the included 3M glue, no other tools required, and it can be done in minutes.
  • Material: The window windshield wiper arm made of high-quality ABS plastic material, the surface is polished.
  • wear-resistant, corrosion-resistant, high-temperature resistant, flexible and stable, long service life.
Check Stock

AUTOBOO Replacement for 2002-2016 Subaru Forester,Compatible With Impreza/Legacy/Outback Rear Windshield Wiper Arm Blade -Factory OE Style

  • 100% Brand New ,Genuine OEM Quality,Longer life. Replacement OEM number:86532SA070, 86532AG09A, 86532AG09B, 86532AG09C.
  • 【 FITMENT】Replacement for 2005-2016 Subaru Forester.
  • 2008-2014 Subaru Tribeca Rear windshield wiper blade arm.
  • 【 FITMENT】Replacement for 2005-2014 Subaru Outback.
  • 2005-2008 Subaru Impreza, 2006-2009 Subaru Legacy back window wiper blade arm.
  • 【Original Equipment Design】The same fit and function as when the vehicle was new,,Easy installation,high reliability.
  • ★CUSTOMER-SUPER SERVICE ★ AUTOBOO wiper arm Puller provide 24-hour online service, 6 month no reason to return, 365 Days warranty..
Check Stock

OTUAYAUTO Battery Terminal and Wiper Arm Puller

  • This Puller designed for professionally dual-purpose use.
  • Easy and safely to remove the stuck on the rear wiper arm.
  • Use to remove battery terminal clamp without damage to cause battery post.
  • Tighten knurled cone to force jaws under the cable clamp. Also removes bolted on windshield wiper arms that fit over a tapered spline.
Check Stock

Vautoparts Wiper Arm Puller Battery Terminal Puller - Wiper Arm Bearing Removal Tool Kit Wiper Ball Rama Car Repair Demolition Wipers Special Handling Tools Two Claw Puller Adjustable Versitile Clamp

  • This wiper arm puller is a perfect tool for removing the wiper arm stuck on the arm for years..
  • Tighten the knurled cone to force the jaws under the cable clamp, dual purpose use..
  • Turn the center screw to remove the clamping device from the terminal and remove the bolt-on windshield wiper arm mounted on the tapered spline.
  • Dimensions:12CM x 8.5CM x 3.6CM(4.72in * 3.35in * 1.41in). Jaw opening: 1/16" - 1-1/16" (6-28mm).
Check Stock

CARTMAN Wiper Arm Battery Terminal Bearing Remover Puller Tool

  • Repair tool can remove the stuck battery terminal, also remove bolted-on windshield wiper arms that fit over a tapered spline.
  • Great multi-function small repair tool designed for professional use.
  • Battery terminal puller overall forged by carbon steel is durable and exquisite appearance. It can easily remove stuck battery terminal,also remove bolt on windshield wiper arms that fit over a tapered spline.
  • Sturdy, Durable & Long Time Service -- This Battery Bearing Extractor Puller is made of strong metal with special heat treatment process, high hardness, corrosion-resistant forged and heat treated steel jaws, can serve for long time.
  • Easy to Operate & Quality Assurance: Jaw opening 6-28 mm for wiper arms with an o/d up to 42 mm.
  • With our battery bearing puller you can get a great helper to handle with difficult tasks.
Check Stock

CNWOOAIVE Windscreen Wiper Arm Puller Car Windshield Wiper Arm Removal Tool Glass Mechanics Puller

  • Function - Used to remove wiper arms on many domestic and foreign cars and light trucks..
  • Advantage - Will not damage the wiper arm or hood fairing during disassembly..
  • Features - It will help you to remove the wiper arm easily..
  • Application - The wiper arm can be removed from many foreign and domestic cars and light trucks. But it does not apply to all types of cars..
  • Instructions - Simply place the puller's feet under wiper arm. Tighten the puller to force the screw against the wiper shaft to remove the arm..
Check Stock

TMC FO1597 Heavy Duty Stainless Steel Dual Windshield Wiper Arm 13 1/2-17 3/8 inches

  • Pantographic arms allow the wiper blade to remain in a vertical orientation, sweeping a more useful pattern on the windshield.
  • Adjustable Marine Wiper Arm extends from 13-1/2 to 17-3/8 inch ( 345mm to 440mm). Suitable for standard and heavy-duty motors.
  • Made of AISI316 Stainless Steel and Black Coated to ensure reliable performance and corrosion resistance.
  • Requires a heavy-duty motor with a 9/16 inch (14mm) shaft.
  • Includes a Hex Key to be adjusted. Compatible with model FO-746. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.
Check Stock

Windscreen Wiper (Revisited)

  • ▶Product Model name : Front Passenger Side Windshield Wiper Arm (4L1955408B Windscreen Wiper Arm).
  • ▶ Replace OE : 4L1955408B1P9, 4L1955408B.
  • ✔ Product Dimensions: 27.1 x 5.54x 3.4 inch , Package Includes: 1 x Front Passenger Side windshield wiper arm for AUDI Q7..
  • ▶ Fitments: For AUDI Q7 2007 2008 2009 -- 2015 2016. Please Compare The Part Number With Your Original One Before Purchasing! Only fit for Left Hand Drive Car wiper arm.
  • ▶ Quality Assurance: 18 month WARRANTY. offers a 30-day unconditional refund for a truly worry-free shopping experience.
Check Stock

YUANJS Wiper Arm Puller,6Pcs Wiper Arm Puller Set Bearing Removal Tool for Astra G/Zafira B/Corsa C/Vectra C

  • 【Function】Can remove the stuck battery terminal, also remove bolted-on windshield wiper arms that fit over a tapered spline..
  • 【Advantage】The heavy duty construction with locking feature allows the tool to be fastened securely to the wiper arm before commencing the pull..
  • 【Features】Bar and ball bearing with rotating mechanism for easy removal of wiper arms..
  • 【Application】Also suitable for the removal of battery terminals or some alternator bearings..
  • 【After Sale】For Any Reason, If You Are Not Satisfied With Your Purchase, Contact Us Directly..
Check Stock