Reviews Window Motor Gear

BLAUPUNKT BL205 Car Power Window Kit, 2-Door, 12 Volt Universal

  • Converts any crank-style window in a power window.
  • Motor enclosed in metal housing to ensure quiet operation.
Check Stock

DEWALT Angle Grinder, 7-Inch, 8,500 RPM, 4.0-HP (DWE4517) , Yellow

  • High power 4 HP (maximum motor HP) 8,500 rpm motor of the angle grinder with overload protection provides higher operating speeds under load.
  • Epoxy coated field and armature of the metal grinder provide long service life against abrasion from airborne debris.
  • DEWALT angle grinder comes with a low-profile gearcase allowing for work in tight areas.
  • Automatic turn-off brushes shut down the tool when brushes need to be changed to avoid tool damage.
  • 2-position side handle provides improved ergonomics for specific applications.
  • 8,500 rpm provides optimal material removal with 7-inch grinding wheels.
  • Brush window allows for quick brush replacement.
  • High power 4 HP (maximum motor HP) 8,500 rpm motor.
  • Low profile gear case allows for work in tight areas.
  • Automatic turn-off brushes shut down the tool when brushes need to be changed.
Check Stock

JIARUIXIN 2 Pcs Universal 550 40000RPM Electric Motor RS550 12V Motor Drive Engine Accessory for RC Car Children Ride on Toys Replacement Parts

  • 2 pcs RS550 12V 40000 Rpm universal Drive motor.
  • Motor Diameter: 35mm(1.38").The motor length is 57mm(2.25"). The total length of the motor is 80 mm(3.15")..
  • Voltage: 12V，Specially customized for car modification （High Speed ).
  • package contains 2Pcs motor, 2Pcs S gear and 2Pcs B gear, 2Pcs C gear,Gear is not mounted on the motor, but in the package.
  • motor is equipped with 10 teeth 3 different gear sets. According to your original teeth, it must be exactly the same. The bottom of the gear motor must be strong and can be directly beaten on the teeth..
Check Stock

Makita GA4542C SJSII High Power Angle Grinder, 4-1/2'

  • Powerful 12.0 AMP motor delivers more output and variable (2,800 - 11,000) RPM.
  • SJSII provides a leaf spring and cam gear drive mechanism that is engineered to reduce vibration.
  • SJSII provides a mechanical gear drive to help prevent motor and gear damage by dampening the force on the gear when the wheel is forced to stop.
  • Variable speed control dial enables user to match the speed to the application.
  • Electronic Controller is a three-part electronic feature designed to provide the required power in high torque applications for increased tool life.
Check Stock

Power Window Lift Motor Fit For Ford F150 F250 F350 Aerostar Front left Window Regulator Motor Replace Part # 742-250 11M104

  • High Quality: A ABIGAIL Window Lift Motor is made by stronger material to prevent premature wear, striping and breakage. The motor is designed with extra torque motors to prevent premature failure resulting from improperly lubricated window lift regulators..
  • Function: The power window lift motor is a essential part used to lift the windows. When you find that you have to press several times to lift the window, it could means that the power motor inside could be defective and should be replaced . The prats works when the driver press a switch and send a signal to the motor and control the lifting..
  • Fitment:This power window lift motor is fit for Front left 1986 - 1989 Ford Aerostar, 1981 - 1990 Ford E-150 Econoline, E-150 Econoline Club Wagon, E-250 Econoline,E-250 Econoline Club Wagon. For further details, please check the description..
  • Interchange Part No.: Replaces # 742-250, 11M104, E3AZ 5423395-A, E3AZ 54233V95-ARM, E5TZ 1023395-A, E5TZ 10233V95-ARM, E9AZ 54233V95-ARM, E9SZ 6323395-A, F4SZ 63233V95-ARM, Dorman 742-250. This Window Lift Motor will meet or exceed OEM standards, it is a direct replacement though it is NOT a genuine Ford part..
  • Warranty:This window lift motor comes with 30 days HASSLE-FREE RETURN & 1 year UNLIMITED REPLACEMENT PROMISE. I....
Check Stock

Metal Gear Motor, 1Pcs 25Mm Dc 12V 25Ga-370 Low Speed Metal Gear Motor for Electronic Lock, Robot, Electric Curtain, Electric Door, Micro Mixer(12V 300RPM)

  • This product is a DC gear motor with high precision metal gear, stable working.
  • This DC motor features large moment of force, low speed, and low noise..
  • The motor is made of metal gear, wear-resisting, avoid tooth breaking, so with long serving life..
  • This motor is adopted of pure copper wire coil, with low heat and low loss..
  • Widely used in electronic lock, robot, electric curtain, electric door, micro mixer, monitoring equipment, pet feeding machine.
Check Stock

Makita Brush Set (Makita 9565CV, 9564CV, PW5001C)

  • Powerful 13.0 AMP motor delivers more output and variable (2,800 - 10,500) RPM for the most demanding applications.
  • SJS technology is a mechanical clutch system that minimizes motor and gear damage.
  • Variable speed control dial enables user to match the speed to the application.
  • Electronic controller provides constant speed control which automatically applies additional power to the motor to maintain speed under load.
  • Electronic controller provides soft-start which is designed to suppress start-up reaction for smooth start-ups and longer gear life.
Check Stock

【Element Airsoft Official Store】Motor Gear Pinion Removal Install Tool RC Motor Pinion Gear Tool Motor Pinion Gear Remover Ffor AEG Motors Metal ARMY FORCE-TL002 BK EX121

  • Element airsoft 's name and element airsoft's quality. The best. Motor gear (pinion gear) tool ● Part number: EX 121. airsoft pinion gear puller.
  • With this tool, it is possible to attach and detach without burden.Mounting and dismounting are possible.The pinion remover is an essential tool for changing the pinion gear of the electric gun motor..
  • The motor pinion gear is usually press-fitted and installed, so it is almost impossible to detach it with a tool other than a dedicated tool..
  • The included small parts are grounded before and after the motor when the pinion gear is press-fitted..
  • * Please note that compatibility with D-type motors will be reduced！！！！It fits for O-type motors！！！！.
Check Stock

Athena (P400250850252/1) Complete Engine Gasket Kit

  • Fitment: Our this 4-Stroke Motor Short Case Engine only compatible with 150cc engine size two-wheeled scooters(Not suitable for go kart)..
  • This 150cc motor only suitable for 10" tire.Widely used in all kinds of two-wheeled scooter.
  • without reverse gear, continuously variable.
  • Transmission CVT: CVT consist mainly of 2 transmission pulleys and 2 transmission belts.
  • It’s compact, simple design offers seamless shifting between an unlimited amount of varying gear ratios, allowing a smooth rate of acceleration.
  • This complete engine set includes carburetor, CDI, starter solenoid, coil,kick start lever..
  • This 150cc motor without reverse gear, short axle, short box, it can be installed on the ATV, but you need to install an additional reverse gear.
Check Stock

CNCEST Outboard Boat Motor Engine Inflatable Boat Fishing Boat Engine Power for Sailboats Small Yachts

  • 【2 Stroke 3.5HP Outboard Motor】- VONZOER 2 Stroke 3.5HP Outboard Motor, superior engine with water cooling CDI system to improve the reliability of the whole machine. Fuel saving, quick start, strong horsepower, low noise, superior performance, environmental protection, durable and compact structure, forward design..
  • 【Wide Applications】- VONZOER outboard boat motor is great for inflatable boats, small yachts, fishing boats and sailboats or used as an auxiliary trolling motor. It is suitable for both saltwater and freshwater..
  • Full throttle perating range: 4000-5000r/min.
  • Recommended fuel: Regular unleaded gasoline.
  • 【Warm Note】- Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours). Our outboard motor doesn't with gear oil, please prepare it by yourself.
Check Stock

Jutagoss 1Pcs Miniature Gear Motor GA12-N20 DC Gear Motor 6V 1000RPM Encoder Speed Velocity Measurement Mini Car Balance Motor

  • 【High Quality】-The gear motor is made of metal gear.
  • Good toughness impact resistance the quality of the bearing and the service life of the gear motor are improved extremely durable.
  • 【Feature】-You can also easily mount a wheel on the motor's output shaft.
  • 【Application】-Great replacement for the rusty or damaged DC geared motor.
  • Widely used in Intelligent remote Control car.
  • 【Package】-1 Pcs GA12-N20 DC Geared Motor with Encoder Test wire.
Check Stock

Reesibi Powerful Compressed Air Duster - 130000RPM Brushless Motor Electric Air Duster for Computers with 4 Battry Indicator Replace Canned Air Dusters 7500mAh

  • ...esired gear.Three airflow modes are suitable for different devices cleaning. The steady, pure airflow won't hurt your valuables at all..
  • 【Multi-purpose】Equipped with two blow-and-suction mode brush nozzles, cleaning stubborn dust is also easy. Perfect for computer, keyboard, camera, pet hair, car, sofa crevices, window blinds, etc.It's not just a powerful air blower and Vacuum cleaner. At the same time, suitable for sealing vacuums and inflating use. (Equipped with the necessary accessories for the corresponding function).
Check Stock

PLUMIA DC 12V 30RPM Gear Motor Centric Output Shaft 37mm Diameter Gearbox High Torque Electric Micro Speed Reduction Geared Motor

  • Product packaging: 1×DC Gear Motor, 6×Screw, 6×Nut..
  • Pure copper wire core rotor, galvanized surface treatment, high-temperature resistance, high abrasion resistance, strong load capacity, sturdy and durable, effectively protect the gear box motor body.With precision winding technology, the geared motor power instant increased by 30%..
  • Using high hardness steel, good toughness, impact resistance, the quality of the bearing and the service life of the gear motor are improved, extremely durable..
  • You also can adjust the speed, but the motor speed can only be reduced, can not be raised. Low noise and high torque, such as 10rpm can drive 15 kilograms..
  • We only offer 100% New PLUMIA Brand high quality motors! Any quality issues, We promise 100% unconditional return service..
Check Stock