Reviews Wide Plank Oak Flooring

Wide Plank 7 1/2' x 5/8' European French Oak (Utah) Prefinished Engineered Wood Flooring Sample at Discount Prices by Hurst Hardwoods

  • One 9" Sample Piece of Hurst Hardwoods European French Oak Prefinished Engineered Hardwood Flooring.
  • 7 1/2" x 5/8" Wide Plank w/Thick w/4mm Wear Layer.
  • 70% of actual floor comes in 73" long lengths.
  • A maximum of two sample orders of this listing may be purchased per customer.**.
Check Stock

Wide Plank 7 1/2' x 5/8' European French Oak (Colorado) Prefinished Engineered Wood Flooring Sample at Discount Prices by Hurst Hardwoods

  • One 9" Sample Piece of Hurst Hardwoods European French Oak Prefinished Engineered Hardwood Flooring.
  • each board comes fully equipped with a 4mm Wear Layer.
  • Lightly Wire Brushed, Hand Scraped, and Distressed.
  • 70% of actual floor comes in 73" long lengths.
  • A maximum of two sample orders of this listing may be purchased per customer.**.
Check Stock

EAB Tool 2100010 EAB Tool Professional Floor Cutter, 13", Black

  • Bonus installation Kit and double-sided honing stone included! Designed to cut laminate, solid wood and engineered flooring up to 15mm (5/8"). will also cut vinyl tile and fiber cement siding such as hardy plank..
  • Cuts laminate flooring, wood flooring and engineered flooring up to 15 mm (5/8"), vinyl tile, pressboard siding and fiber cement siding such as hardier plank.
  • Angle gauge allows for cuts up to 45 degrees.
  • Quiet, dust free operation, No electricity required.Replaceable blade 2100011 can be re-sharpened with included sharpening stone.Installation Kit: tapping block, Wedge SPACER, pull bar and double-sided honing stone.Ships to the US only.Professional level.
Check Stock

Super Wide Plank 10 1/4' x 5/8' European French Oak (Tacoma) Prefinished Engineered Wood Flooring Sample at Discount Prices by Hurst Hardwoods

  • One 10" Sample Piece of Hurst Hardwoods European French Oak Prefinished Engineered Hardwood Flooring.
  • each board comes fully equipped with a thick 4mm Wear Layer.
  • 70% of actual floor comes in super long 87" lengths.
  • A maximum of 2 orders for these samples may be purchased per customer.**.
Check Stock

Super Wide Plank 10 1/4' x 5/8' European French Oak (Matterhorn) Prefinished Engineered Wood Flooring Sample at Discount Prices by Hurst Hardwoods

  • One 10" Sample Piece of Hurst Hardwoods European French Oak Prefinished Engineered Hardwood Flooring.
  • each board comes fully equipped with a thick 4mm Wear Layer.
  • 70% of actual floor comes in super long 87" lengths.
  • A maximum of 2 orders for these samples may be purchased per customer.**.
Check Stock

Super Wide Plank 10 1/4' x 5/8' European French Oak (Blue Ridge) Prefinished Engineered Wood Flooring Sample at Discount Prices by Hurst Hardwoods

  • One 10" Sample Piece of Hurst Hardwoods European French Oak Prefinished Engineered Hardwood Flooring.
  • each board comes fully equipped with a thick 4mm Wear Layer.
  • 70% of actual floor comes in super long 87" lengths.
  • A maximum of 2 orders for these samples may be purchased per customer.**.
Check Stock

EAB Tool 2100007 13' Laminate Floor Cutter with Installation Kit

  • BONUS installation Kit and double-sided honing stone included! Designed to cut laminate, solid wood and engineered flooring up to 15mm (5/8″). will also cut vinyl tile and fiber cement siding such as hardy plank..
  • Designed to cut laminate, vinyl, solid wood and engineered flooring up to 15mm (5/8″). will also cut fiber cement siding such as hardy plank.
  • Angle gauge allows for cuts up to 45 degrees.
  • Quiet, dust free operation, No electricity required.
Check Stock

MantisTol 8.9

  • Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring. You need to know that this can only cut vinyl plank, not laminate floor or wood floor!!!No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time..
  • Why does the floor you cut crack? Because your floor must be Rigid Core Vinyl Plank SPC or RVP, it is a stone-plastic composite material, which contains stone powder.
  • it is a brittle material. Floor cracks occur when at least two or more cuts are required to make long cuts and corner cuts..
  • " L & " cut and Lengthwise cut (Solve the installation of wall and corner). Clearly marked measuide. 0-45 Angle Cutting, Cutting max.depth 8mm.Translational cutting,the deep of the throat is 115mm/4.5inch.Easy to use and to carry around, you will like it.
  • 2.2mm thick 9 length tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade (did flooring on about 2000 square feet), Otherwise it will quickly end the service lifethis is a man-made damage and is not covered by the warranty! Or replace blade..
  • Angle Cutting: 0 - 45 inch 160mm wide plank.
Check Stock

Xeternity-Made Laminate Wood Flooring Installation Kit with Double Headed Mallet,Pull Bar,Tapping Block,40 Spacers,2 Knee Pads and 1 Backpack

  • ...ss and pressure resistance. The design helps prevent the spacer from falling over and bouncing out with the vibration from hitting the floor together. Unlike the cheap wedges that most kit come with, they stay in place and upright. The wide base make them very stable and durable..
  • 【Well-chosen Material】This wood flooring tools are made of impact and chemical resistant PP material, which are very durable and reusable. Newly upgraded heft and thickness, they hold up under hammering. Each spacer weighs about 20g, and the appearance of the spacer is more classy and beautiful..
  • 【Perfect Spacing】Flooring Spacer provides 1/2" and 1/4" spaces between each plank and the wall, which gives you 2 spacing options and easy to use. Spacers not only provide the proper expansion gaps for most floor, but also ensure less damages on floors. They are strong and easy to insert and remove..
  • 【Make the Flooring Job Easier】Spacers are a must have for installing laminate flooring, bamboo, ivt, LVT, wood, subfloor panels, vinyl plank flooring, engineered hardwood flooring or any floating floor material and help save time on the job. These spacers allow you to do everything quickly, accurately and simply. Ideal for DIY and professional use..
Check Stock

Selkirk Engineered Bamboo Plank Flooring – Strand Woven Click Lock Maxwell SK55590 Sample

  • Durable and Reusable - This flooring spacers are made from impact and chemical resistant plastic, which are very durable and reusable..
  • Triangle Design - Special scientific triangle design with 1/4 inch & 1/2 inch gap, keep the floor spacers more stability and assures less damages on floors when installing flooring..
  • Easy to Install - Floor spacers are very easy to install and remove from all kinds of wooden floors within few seconds. More conveniently and easier to install your wood flooring..
  • Wide Application - Suitable for installing laminate, vinyl plank, engineered hardwood, bamboo, LVT, subfloor panels, or any floating floor material..
  • Package Includes - 20 pack floor spacers help you to install your laminate wood flooring quickly, efficiently and accurately. Not only save your time but also save your money..
Check Stock

Powernail 2000F Pneumatic 20 Gauge Trigger Pull L-Cleat Nailer for Engineered and Hardwood Flooring

  • Installs 5/16” to 1/2” (8 mm to 13 mm) engineered flooring.
  • Compact design for installation close to walls and in tight spaces.
  • Adjustable FLEX Foot for quick and easy adjustment (no tools required).
  • Unique nose fits today’s wide variety of profiles including tongue & groove and interlocking plank.
Check Stock

ROBERTS 10-95 Cutter for Laminate, Engineered Wood, Carpet Tile, and Vinyl Floors, 25 in.

  • Guillotine-style cutter, cuts vinyl plank flooring, vinyl siding, VCT, LVT, WPC, Allure, laminate, engineered wood, carpet tile, MDF baseboard, rubber tiles and foam tiles.
  • Cuts flooring up to 25 in. wide, 17 in. diagonal and 5/8 in. (16 mm) thick.
  • Long-lasting 25 in. tungsten steel blade features a sharp cutting edge.
  • Swivel miter guide for 45-degree angle cuts.
  • Extruded aluminum support base with a comfortable, solid plastic working area.
Check Stock

EAB Tool Exchange-a-Blade 2100005 9-Inch Laminate Flooring Cutter

  • BONUS installation Kit and double-sided honing stone included! Designed to cut laminate, solid wood and engineered flooring up to 15mm (5/8"). will also cut vinyl tile and fiber cement siding such as hardy plank..
  • Designed to cut laminate, vinyl, solid wood and engineered flooring up to 15mm (5/8"). will also cut fiber cement siding such as hardier plank.
  • Angle gauge allows for cuts up to 45 degrees.
Check Stock