Reviews Wheel Spacers Honda Element

StanceMagic - 5mm Hubcentric 5x114.3 and 5x120 Wheel Spacers (64.1mm Bore) Compatible with Acura Honda ILX RL RSX TLX TL TSX MDX RLX Accord Civic Element Prelude S2000 CR-Z - 2pcs

  • StanceMagic Hubcentric Wheel Spacers fits vehicles with 5/114.3 (5/4.5") bolt pattern and 64.1mm Centerbore. Compatible with Acura CL, ILX, Integra Type R, NSX (Rear), RDX, RL, RSX, TL, TLX, TSX, MDX. Compatible with Honda 1998-2002 Accord (V6 Engine / 5-Lug Only), 2003-2021 Accord, 2006-2021 Civic, CR-V, CR-Z, Element, HR-V, Odyssey, Pilot, Prelude, S2000 (Rear). Check Year/Model in Description. May fit others, verify using spacer specifications..
  • [VERIFY FITMENT] Even if a vehicle is listed as being compatible, buyers still need to check: 1) You have 5mm of space between your fender and your wheel/tire.
  • 2) Your studs/bolts are the correct length to ensure safe nut/bolt thread engagement.
  • 3) For proper installation you may need aftermarket Extended Lug Bolts or Extended Wheel Studs (NOTE: NOT INCLUDED with this listing).
  • 4) Wheels will center around vehicle's hub lip as long as it is longer than 5mm..
  • [SPECIFICATIONS] Two (2) Wheel Spacers with No Lip | Thickness: 5mm Wide | Bolt Pattern: 5x114.3 / 5x120 | Hub Center Bore: 64.1mm | Extended Lug Bolts / Wheel Studs / Additional hardware are Not Included. This listing is for spacers only as pictured. [....
Check Stock

25mm (1 inch) Hubcentric 5x114.3 Wheel Spacers (64.1mm bore, 12x1.5 Studs) Compatible with Acura Honda ILX RL RSX TLX TSX Integra Type R TL Accord Civic Element S2000 CRZ CR-Z - Black 2pcs

  • StanceMagic Hubcentric Wheel Spacers with Lip for vehicles with 5/114.3 (5/4.5") Bolt Pattern and 64.1mm Centerbore. Compatible with Acura CL, ILX, Integra Type R, NSX (Rear), RDX, RL, RSX, TL, TLX, TSX, MDX. Compatible with Honda 1998-2002 Accord (V6 Engine, 5-Lug), 2003-2021 Accord, 2006-2014 Civic, 2015-2021 Civic (Non Type R), CR-V, CR-Z, Element, HR-V, Odyssey, Pilot, Prelude, S2000 (Rear). Check Year/Model in Description. May fit others, verify using spacer specifications..
  • [VERIFY FITMENT] Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are M12x1.5 12x1.5mm threads.
  • 2) You have 1.0" (25mm) of space between your fender and your wheel/tire.
  • 3) Your factory wheel studs are shorter than 1.0" (25mm) (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit).
  • 4) Wheel center bore needs to be no smaller than 64.1mm..
  • [SPECIFICATIONS] Two (2) Wheel Spacers | Thickness: 1.0" (25mm) Wide | Bolt Pattern: 5x114.3 (5x4.5") | Hub Bore: 64.1mm | Lip Diameter: 64.1mm | Stud/Nut Thread Pitch: 12x1.5 | [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corrosion and rus....
Check Stock

15810-RAA-A03 Spool Valve Assembly VTEC Solenoid with Timing Oil Pressure Switch &Gasket,Compatible with Honda Accord,CR-V,Element,Civic Si, RSX,Replace# 15810-RAA-A01 15810-PPA-A01 15810-PNE-G01

  • ...afts, the engine gets the best features of low-speed and high-speed camshafts in the same engine；Superior quality enameled wire, high temperature resistance up to 210 Centigrade with better thermos ability compare with regular wire’s 150-180 Centigrade.
  • UPGRADED MATERIAL AND ECO-FRIENDLY:Upgraded stainless steel spacers inside Oil pressure-sensitive switch where oil spills often occur, provide greater durability and longevity than plastic spacers and improve leak free performance, All of the materials used for surface treatment are carefully selected and are eco-friendly. They are more environment protecting than regular Zinc-plating treatment.
  • Providing high quality and professional parts with great service.if you have any questions, please feel free to contact us by email for more information!We will solve it for you in the first time!.
Check Stock

High Lifter ATV Wheel Spacers (One Pair) 1.5\ 4/156 3/8-24

  • RockTrix Offroad ATV Wheel Spacers - Fits machines with 4/110 Bolt Pattern, a hub lip (center bore) not larger than 74.1mm, and M10x1.25 10x1.25mm wheel studs. Works with various ATV, UTV, Side by Side, Quads. Verify fitment by checking that your machine's bolt pattern, hub, and stud thread size match that of our ATV Wheel Spacers before making your purchase..
  • Your wheel studs MUST be 10x1.25 for these to fit. Compatible with select Bombardier Traxter 500 4WD, Quest 500 4WD. Compatible with Honda Big Red 250, Recon 250, FourTrax 300 350, FourTrax Foreman 350, Rancher 350 400 420 4WD, Foreman Rubicon 500 4WD, Rincon. Compaitble with Suzuki Eiger 400, Ozark 250, King Quad, Vinson 500. Compatible with Yamaha Timberwolf 250, Bear Tracker 250, Big Bear, Bruin, Wolverine, Grizzly, Kodiak, Rhino. Verify Year/Make/Model in Description..
  • [SPECIFICATIONS] Package: Set of Two (2) wheel spacers | Thickness: 2.0" (50mm) Wide | Bolt Pattern: 4x110 | Hub Center Bore: 74.1mm | Stud/Nut Thread Pitch: 10x1.25 | [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corrosion and rust. Includes heat treated 10.9 grade carbon steel studs..
Check Stock

KAX 5x4.5 Wheel Spacers 20mm Thick M12x1.5 Studs 64.1mm Center Bore Accessories Parts Fits for Accord Civic CR-V CR-Z Odyssey MDX CDX CL CSX ILX TL TLX(4PCS)

  • SPECIFICATIONS: Set of 4, 0.75"/20mm Thickness, 5x4.5"(5x114.3mm)PCD (Bolt Pattern), 64.1mm Hub Bore, M12x1.5 Studs. KAX Wheel Spacers are made from the best true T 6 billet aluminum, with heat-treated and hardened 10.9-grade bolts pre-installed. The anodized surface provides additional resistance to corrosion..
  • VEHICLE FITMENT: This wheel adapter set compatible with Civic CR-V CR-Z Element Prelude Pilot Jade MDX CDX CL CSX ILX Integra R TL TLX and more.
  • SAFETY & BENIFITSet of 4 High Quality Wheel Adapters/Spacers allow extra clearance between the wheel and the wheel hub assembly increasing the offset which allows for larger tire installation to the vehicle. Wheel spacers also increase the vehicle's performance in terms of handling and traction. The further the wheel is from the hub assembly, the better its grip..
  • COMPLETE KIT with EASY INSTALLATION: KAX wheel spacer set includes all the necessary bolts and lug nuts for a complete installation. Wheel spacers extend the wheels outward the vehicle giving it a more aggressive look, which also allows for large brake caliper installations or lifts/lowering kits..
  • PLEASE NOTE: Recheck your vehicle compatibility (Year/Make/Model) in the Product Description BEFORE buying these wheel spacers. We provide professio....
Check Stock

TARAZON 21 19 Wheels Complete Set Red Hubs Rims Spokes for Honda CRF250R CRF450R 2014 2015 2016 2017 2018 2019 2020 2021 CRF250 CRF450 R

  • CNC aluminum 6061 hubs and 7075 T7 alloy rims and 65 manganese spokes with brass nipples, not cheap casting hubs.
  • 36 spokes holes ,also including bearings,seals and wheel axle spacers, Front Axle Spacers Diameter 25mm, Rear Axle Spacer Diameter 20mm.
  • Each wheel has been tested guaranteeing the best in quality and performance, Pre-assembled complete wheels.
  • Front wheel 21" x 1.60" rim width, Rear Wheel 19" x 2.15" rim width,Factory directly sales complete wheel set and we also can custom hub color.
  • Fit for Honda CRF250R 2014-2021 & CRF450R 2013-2021.
Check Stock

IRONTEK 1' Wheel Spacers 5x114.3 to 5x100 (73.1mm Bore, 12x1.5 Studs) 5x4.5” to 5x100mm Wheel Spacers Adapter 25mm Fits Chrysler Town & Country, Toyota Tacoma, Dodge Grand Caravan, Honda Accord

  • 【Wheel Spacers Parameter】Vehicle Must-Have 5x114.3 (5x4.5") bolt pattern, Wheel Must Have 5x100 bolt pattern. Wheel spacers thickness: 1.0in or 25mm.
  • 【Wheel Spacers Fitment】Compatible with various Acura, Dodge, Honda, Hyundai, Jeep, Kia, Lexus, Mitsubishi, & Toyota vehicles. Please check the Year/Make/Model of your vehicle with the PART FINDER TOOL on the top left corner to confirm before purchase. May fit other vehicles, verify with adapter specifications..
  • 【NOTE】Your Factory wheel studs may extend past the surface of the wheel spacers. In this case, you have 3 choices: I)Shorten the factory studs II) The wheels need to have the open slots (cavities) between mounting holes. III) Purchase a set of shorter studs and replace them with the factory studs..
  • 【Premium Quality】Made from High-tensile-strength aluminum alloy (T6 billet aluminum), lighter weight and more sturdy compared to steel spacer. 100% applications tested in rigid durability and fatigue tests to meet SGS standard, High-grade corrosion protection through a special coating process, provide longer life and smoother operation..
  • 【100% Warranty】1-year warranty. Contact our friendly, helpful, and knowledgeable cu....
Check Stock

Orion Motor Tech ATV 4x110 Wheel Spacers 2 Inches with 10x1.25 Studs, Compatible with Polaris Kawasaki Yamaha Rhino Grizzly Suzuki, 4pcs

  • SPECIFICATIONS: Bolt Pattern: 4x4.33"(vehicle) to 4x4.33"(wheel). Center Bore: 74.1 mm/2.91". Thickness: 2.0". Quantity: 4 pieces. Thread Size: M10x1.25..
  • COMPATIBILITY: Fitment for Honda, Polaris, Kawasaki, Yamaha, Rhino, Grizzly, and Suzuki ATVs - see product description below for full make/model compatibility..
  • 4x110 ATV WHEEL SPACERS: Our front and rear wheel spacers provide your all-terrain vehicle with an aggressive stance and appearance while improving stability handling. Increase tire clearance, fix brake caliper clearance issues, install lift/lowering kits and wider, larger, or high-traction tires..
  • TRUSTED QUALITY: Precision-machined 6061-T6 aircraft-grade aluminum billet with heat-treated and hardened 10.9-grade bolts pre-installed. Anodized surface for additional corrosion resistance. Exceptional strength and durability..
  • 2-YEAR WARRANTY: We offer a 2-year warranty for this full set (spacers, bolts, and nuts). Contact our helpful service representatives if you have any questions or concerns..
Check Stock

PreeminentMotors 4 pcs Forged ATV UTV 4X110 Wheel Spacers 1 inch with 10×1.25 Studs | 76mm Hub Bore, Compatible with Suzuki Yamaha ATV/UTV(Check the Listing for Year Model Info)

  • ★4X110 Wheel Spacers SPECIFICATIONS: 4 PCS 1" (25mm) Thickness /4X110 Bolt Pattern /76mm Hub / 10X1.25 Threaded Studs/Nuts/ Blue Anodized Finish..
  • ★PACKAGE INCLUDES: 4X Wheel Spacers (1" thickness per unit), 2X High Strength Thread-locking (red), 2X Instructions, 2X Vehicle Stickers..
  • ★ATV/UTV Wheel Spacers APPLICATIONS: (I) 1997-2009 Honda Recon 250 (II) 1999-2005 YAMAHA Bear Tracker 250 (III）2004-2014 YAMAHA Rhino 660 (IV) 2011-2016 King Quad 500 etc..
  • ★BENEFITS:(I) CNC automatic processing ensure high accuracy and stability. (II)6061-T6 aluminum forged alloy material. (III)High quality pre-installed heat treated 10.9 grade studs. (IV) Geomet finish studs for better antirust effect. (V) Provides increased wheel and tire clearance..
  • ★PRODUCT WARRANTY: All PreeminentMotors products are covered by the two (2) years warranty to be free of defects in material and workmanship for two (2) years from date purchased. Please reach our helpful service representatives if you have any questions or concerns..
Check Stock

Supreme Suspensions - 4pc Set of 1.5\ Wheel Spacers for 2016-2021 Honda Pioneer 1000 and 2019-2021 Talon 1000R | 4x137mm Bolt Pattern, M12 x 1.5 Studs & 110mm Center Bore ATV Wheel Spacer [Silver]

  • COMPATIBLE WITH 2016 - 2021 Honda Pioneer 1000 and 2019 - 2021 Honda Talon 1000R. *Does NOT fit models with DUALLY setup..
  • CONTENTS: (4x) Lug-Centric Wheel Spacers with Precision-Machined Splined Studs, (4x) T6 Billet Aluminum Tire Valve Stem Caps, Installation Hardware, and Supreme Suspensions Pro Pack..
  • SPECIFICATIONS: 1.5 Inches Thick, 4 x 137mm Bolt Pattern, M12 x 1.5 Stud Size, 110mm Center Bore (Matches Vehicle Hub Diameter) | NOTE: Our wheel spacers will NOT work with any other sized nut or center bore larger than 131mm. Please verify this to prevent fitment problems..
  • BENEFITS: Positions your wheels 1.5 inches outward to correct tire rubbing issues, increase cornering stability, and allow for a more impressive stance. Features Hydraulic Pre-Pressed Studs to help eliminate the risk of vibrations. Easy bolt-on installation takes just minutes with standard hand tools. *Note: Factory wheel studs may need to be shortened to ensure safe fitment of the wheel. We recommend the use of a Torque Wrench to ensure proper tightening of hardware..
  • UNIVERSAL TIRE VALVE STEM CAPS: Included with purchase are 4 Universal Tire Valve Stem Caps precision CNC machined from Light-Weight T6 Billet Aluminum with anodized surface and rust & water-resistant polymer thread i....
Check Stock

RockTrix - 2 inch ATV Wheel Spacers 4x110 74mm Bore 10x1.25 Studs Nuts Compatible with Honda Yamaha Suzuki Bombardier Read Listing for Year Model Info UTV V4 50mm Silver 2pcs

  • RockTrix Offroad ATV Wheel Spacers - Fits machines with 4/110 Bolt Pattern, a hub lip (center bore) not larger than 74.1mm, and M10x1.25 10x1.25mm....
  • Your wheel studs MUST be 10x1.25 for these to fit. Compatible with select Bombardier Traxter 500 4WD, Quest 500 4WD. Compatible with Honda Big Red....
  • [SPECIFICATIONS] Package: Set of Two (2) wheel spacers | Thickness: 2.0" (50mm) Wide | Bolt Pattern: 4x110 | Hub Center Bore: 74.1mm | Stud/Nut Thread....
  • [PRODUCT BENEFITS] Gives your machine's body a more aggressive stance and ensures exceptional wheel balance. Improves handling characteristics and....
  • [INSTALLATION] Requires standard tire repair tools, a torque wrench, and lug socket. While installation is simple and most knowledgeable buyers can....
Check Stock

HICKS 2.0\ ATV Wheel Spacers (4x110, 74mm Bore, 10x1.25 Studs Nuts) Compatible with Various Honda Yamaha Suzuki Bombardier UTV V1 50mm Black 4pcs

  • ...0, Recon 250, FourTrax 300 350, FourTrax Foreman 350, Rancher 350 400 4WD, Foreman, Rancher 420 4WD, Foreman Rubicon 500 4WD, Rincon 650 680, Eiger 400, Ozark 250, King Quad, Vinson 500, Vinson 500, Timberwolf 250, Bear Tracker 250, Big Bear, Bruin, Wolverine 350 450, Grizzly, Kodiak, Rhino..
  • HICKS Offroad ATV Wheel Spacers - Fits machines with 4/110 Bolt Pattern, a hub lip (center bore) not larger than 74.1mm, and M10x1.25 10x1.25mm wheel studs. Works with various ATV, UTV, Side by Side, Quads..
  • Package: Set of Two (2) wheel spacers | Thickness: 2.0" (50mm) Wide | Bolt Pattern: 4x110 | Hub Center Bore: 74.1mm | Stud/Nut Thread Pitch: 10x1.25 | [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corrosion and rust. Includes heat treated 10.9 grade carbon steel studs..
  • Solid Quality: Made from 6061-T6 aircraft-grade aluminum billet, with heat-treated and hardened 10.9 grade bolts.Strengthening the connection of bolts and the holes for without vibration.The anodized surface for corrosion resistance and durability.Easy to install..
  • INSTALLATION:Requires standard tire repair tools, a torque wrench, and lug socket. While installation is simple a....
Check Stock

RockTrix - 2 inch ATV Wheel Spacers 4x110 74mm Bore 10x1.25 Studs Flat Nuts Compatible with Honda Yamaha Suzuki Bombardier Read Listing for Year Model Info UTV V2 50mm Black 2pcs

  • RockTrix Offroad ATV Wheel Spacers - Fits machines with 4/110 Bolt Pattern, a hub lip (center bore) not larger than 74.1mm, and M10x1.25 10x1.25mm....
  • Your wheel studs MUST be 10x1.25 for these to fit. Compatible with select Bombardier Traxter 500 4WD, Quest 500 4WD. Compatible with Honda Big Red....
  • [SPECIFICATIONS] Package: Set of Two (2) wheel spacers | Thickness: 2.0" (50mm) Wide | Bolt Pattern: 4x110 | Hub Center Bore: 74.1mm | Stud/Nut Thread....
  • [PRODUCT BENEFITS] Gives your machine's body a more aggressive stance and ensures exceptional wheel balance. Improves handling characteristics and....
  • [INSTALLATION] Requires standard tire repair tools, a torque wrench, and lug socket. While installation is simple and most knowledgeable buyers can....
Check Stock