Reviews Wheel Lock Bolts

Andersen Ultimate 5th Wheel Connection Lock (Andersen Ultimate 5th Wheel W/Trimax)

  • ULTRA-HIGH SECURITY TRAILER COUPLER/HITCH LOCK: Proprietary straight forward and strong design fits all versions of the Andersen Ultimate 5th Wheel connection to include both funnel applications (steel and red poly) and the new upgraded eye bolts..
  • HEAVY DUTY: This Andersen Ultimate 5th Wheel Connection lock is constructed of 3/16" fully welded cold rolled steel, with welded hinges and hinge pins and is bolt cutter, and crowbar proof!.
  • BRIGHT YELLOW POWDER COAT FINISH: We believe in presenting a hard target that is why we use a bright yellow powder coat to warn off would be thieves..
  • TRIMAX PUCK LOCK: This high-security, hidden-shackle padlock features a 2-7/8" wide lock body that conceals a 3/8" diameter shackle to prevent theft..
  • FT. KNOX LOCKS: We are a family run and operated small business with our locks designed and proudly made in the USA..
Check Stock

ABN Removable Trailer Wheel Chock – Universal Stopper Cradle Holder for Standard Motorcycle Bike Front Wheels

  • LOAD AND TRANSPORT YOUR BIKE: The ABN | Motorcycle Wheel Chocks Front Motorcycle Stand Wheel Chock 1-Pack is standard-sized to hold the front wheel of any street bike.
  • Motorcycle wheel chocks for trailer floor fits standard front wheels (motorcycles with super-wide front tires or custom low-profile front fenders may not fit this wheel chock).
  • EASY TO USE: Designed with one-person loading in mind.
  • Simply drive or push your bike into the motorcycle front stand to secure your bike in the upright position (use with straps to tie down and support – not included).
  • Takes only minutes to install and seconds to load and unload.
  • MOUNT ON FLAT SURFACE: Mount on wood or metal floor – Mounting plate is held off the floor by the included spacers while the bolt that holds the top to the frame goes in from top with nut and lock washer on the bottom under the mounting plate.
  • Removable by unbolting from your application surface (not quick attachment) – Mounting points allow the motorcycle wheel stand to be removed.
  • 24.5” x 10” x 13” inch (62.2cm x 25.4cm x 33cm) overall and 10-inch (25.4cm) motorcycle front wheel chock length.
  • BUILT TO LAST: Heavy-duty 7-gauge formed steel base plate construction, carbon steel hardware....
Check Stock

ATPTOOL Heavy Duty Fender Rolling Reforming Extending Tool Wheel Arch Roller Flaring Former

  • Efficiently Reforming Tool: You will need the fender roller when upgrading to a larger tire, wheel, or even the addition of fender flares. Increase tire to wing clearance, flare arches or repair wheel arch collision damage..
  • Applicable: This wheel arch roller can lock onto wheel mounts, with elongated holes in the adapter plate to fit all popular 4 and 5 bolt hubs adjusts from 21" to 25.5". It fits most cars and light trucks..
  • Adjustable Arm: The fully adjustable arm allows you to pull or push gradually and allows this fender roller for 180 degrees wheel swivel. Attached hitch pin allows for wide or narrow angle..
  • Easy Operation: Bolts are connected to the hub flange, with elongated holes in the adapter plate. This fender roller uses a small wheel made of nylon to roll back and forth on the wheel arch, flatten the dent parts, and the small wheel is controlled by a handle..
  • Durable: The body is made of iron which possesses of excellent hardness. The handle is galvanized, and the rest is painted in blue..
Check Stock

EISENKERN Deck Wheels Replacement fit for Craftsman MTD Cub Cadet 734-04155 Toro 112-0677 Mower 5' Lawn Mower Wheel Kit with Shoulder Bolts and Nuts (2 Pack)

  • 【VALUE PACK】EISENKERN mower deck wheel kit is packed with 2 deck wheels+2 shoulder bolts+2 lock nuts..
  • 【HIGH QUALITY】EISENKERN deck wheel is made of high quality material,durable,thick,good work stability,and high temperature resistance,tread smooth,easy to install.It's a perfect deck wheels replacement for your lawn mower,just as the original part..
  • Centre hole:1/2".Shoulder Bolts Width::0.5",Length:3-9/16".Locking Nuts:0.75" Width.(Note:Please check size in picture 5&6 and description carefully before you purchase,make sure Deck Wheels fit your mower model)..
  • 【FIT MODELS】Fit for Cub Cadet LT1042 LT1050 LTX1040 LTX1045 LTX1050 RZT50 lawnmower,work with Cub Cadet 42" 46" 48" 50" 54" deck.Compatible with Cub Cadet,MTD,Toro,Oregon and many other brands.Fit for John Deere: AM116299 M111489 M11149 AM133602.
  • 【REPLACEMENT FOR】Mower deck wheel 5" replaces OEM PARTS MTD/Cub Cadet/Troy Bilt/Yardman 734-04155,734-04039,734-3058,Toro 112-0677.Fit for Cub Cadet RZT50,RZT53 zero turn,LTX1050,LT1042 LT1050 LTX1040 LT1050 LTX1045,2000 series cub Cadet Z Force Mower Deck,13AK11CK712..
Check Stock

GDSMOTU 6x5.5 Wheel Spacers 6 Lug for C-h-e-v-y Silverado 1500, 2” 6x139.7 Wheel Spacers 14x1.5 Studs 108mm Fit for Sierra 1500 Express 1500 Tahoe Yukon Avalanche

  • COMPATIBLE VEHICLE - 6x5.5 wheel to 6x5.5 Vehicle Fit for 1999-2014 Sierra 1500 | For 1997-2014 Express 1500 | For 1999-2018 Silverado 1500 | For 1999-2014 Escalade | For 2003-2009 Escalade ESV | For 2002-2013 Escalade EXT | For 2002-2005 Astro | For 2007-2013 Avalanche | For 2002-2006 Avalanche 1500 | For 1988-2000 C2500 | For 1988-1999 K1500 | For 1995-2014 Tahoe | For 2009-2011 Savana 1500 | For 2000-2014 Yukon | For 2000-2014 Yukon XL 1500.
  • SPECIFICATION - Complete Kit 2 Inches Thickness with 6 Lug, 108mm hub center, 14x1.5 Stud Thread Pitch, 6x5.5 Vehicle Bolt Pattern, 6x5.5 Wheel Bolt Pattern. Our store provide 4 Lug/5 Lug/6 Lug/8 Lug types wheel spacer.There must be a suitable vehicle for you because we’re professional auto part store..
  • BUILD QUALITY - When the vehicle is installed with wheel spacers, it will generate a lot of heat and pressure when driving at high speed. In order to ensure the safety of every driver, we use 6061-T6 forged aluminum alloy material. (Generally used in aviation equipment) The bolts installed are of 10.9 grade, which can lock your tires firmly even in drifting and sharp turns..
  • INSTALLATION - It is recommended not to use an impact wrench when you install the wheel spacers, you can screw the bolts by hand or Torque....
Check Stock

ABN Automotive Car Steering Wheel Puller Compressor Remover Set – Vehicle Steering Wheel Lock Plate Removal Tool Kit

  • EFFORTLESSLY REMOVE STEERING WHEELS: Use the ABN | Steering Wheel Removal Tool Set to apply equal pressure so you can safely remove steering wheels.
  • This universal steering wheel puller tool kit includes a steering lock plate remover in order to remove and replace the bearing in the steering column.
  • VARIOUS APPLICATIONS: For most American domestic and import cars and light trucks.
  • Remove steering wheels with or without a telescoping tilt or tilt steering columns (first remove the horn cover plate and the steering wheel nut when applicable).
  • Compresses locking plate spring to allow removal of retaining clip.
  • Allows access to turn signal switch and SIR modules on current GM vehicles.
  • Also allows you to pull old GM steering wheels to service the ignition lock cylinder for locksmith needs.
  • BUILT TO LAST: When used properly, this steering wheel puller kit will not cause any bending or spreading.
  • Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion.
  • We recommend putting a drop of oil (not included) on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate.
  • EASY STORAGE: Heavy-duty 12.6” x 2.25”....
Check Stock

Steelwater AMSWD-360 2-Hour Fireproof Home and Document Safe

  • - 2-Hour fire rated at 1850°F (1010°C) 2- Layers of Steel (Steel inner walls and door, NOT PLASTIC).
  • Pre-set (4) wheel non-changeable combination dial (2)Active rectangular locking bolt--Key lock that retracts the locking bolts (includes 2....
  • (2) Stationary Rectangular Locking Bolts On Hinge Side (1) Pre-drilled 1/2" diameter anchor hole--(1) Removable tray that is 1 1/2" deep - LIFETIME....
  • SEE MORE IN-DEPTH DETAILS ON THIS PAGE BELOW ADVERTISEMENTS.
  • This safe will be shipped by UPS parcel or Fed Ex and will not need a signature to be delivered but make sure to inspect the safe within 2 days to be....
Check Stock

DASBET Fender Roller Reforming Extending Tool, Heavy Duty Wheel Arch Roller Flaring Former for Automobile Maintenance

  • Effective Reforming Tool: This fender roller works on fender from inside wheel well, it can increase the clearance between the tire and the fender to fit larger tires, repair the dent or damage of the fender..
  • Adjustable Arm: Equipped with adjustable arm has second telescoping arm with roller, allows this fender roller for 180 degrees wheel swivel. Attached hitch pin allows for wide or narrow angle..
  • Easy Operation: Bolts are connected to the hub flange, with elongated holes in the adapter plate. This fender roller uses a small wheel made of nylon to roll back and forth on the wheel arch, flatten the dent parts, and the small wheel is controlled by a handle..
  • Sturdy Material: We used treated steel to make this fender roller, the handle is galvanized, and the rest is painted in blue. It is an effective tool for repairing or reforming fender which is sturdy and durable..
  • Wide Applicable: This wheel arch roller can lock onto wheel mounts, with elongated holes in the adapter plate to fit all popular 4 and 5 bolt hubs adjusts from 21" to 25.5". It fits most cars and light trucks..
Check Stock

MKLGMYTSY 4 Pack Lawn Mower Deck Wheels Replacement MTD 734-04155 Toro 112-0677 Fit for Craftsman Husqvarna Cub Cadet

  • 【 Fits Models 】Fit for Cub Cadet LT1042 LT1050 LTX1040 LTX1045 LTX1050 RZT50 lawnmower, work with Cub Cadet 42" 46" 48" 50" 54" deck..
  • 【 Package Including 】 4 Deck Wheels + 4 Shoulder Bolts + 4 Lock Nuts, Specs: Wheels: Width: 2-3/8".
Check Stock

Volkswagen 2019 VW Jetta Lockable Wheel Lock Bolts Set OE NEW GENUINE 000071597D

  • 2019 VW Volkswagen Jetta Lockable Wheel Lock Bolts Set OE NEW GENUINE 000071597D.
Check Stock

KIMISS Steering Wheel Button, Carbon Fiber Steering Wheel Horn Push Button Kit for 6 Bolts for Sparco Steering Wheel Auto Car Modified Parts

  • Applicable steering wheel--------Car Steering Wheel Dual Side Buttons Applicable 6 bolts for steering wheel, suitable for all 6 steering wheel bolts, with medium horn button, 2 spade connectors at the rear.
  • Excellent material -------- Horn Push Button uses high-quality carbon fiber material, enhances the texture of the steering wheel, strong and durable, maximizes durability, quality assurance.
  • Easy to install----Steering Wheel Button is easy to install, does not require complicated tools, easy to use, install all 6 bolts of the steering wheel at the position with the center horn button, and 2 shovel-shaped connections at the rear Device..
  • Stable performance--------New and high-quality Steering Wheel Cruise Control Switch Button, with stable characteristics and high reliability. Very suitable for your car, professional features and high reliability will bring you an excellent experience..
  • Standard specifications -----Steering Wheel Switch Multimedia System meets the standard specifications and strictly follows the factory quality control. Use this factory attachment to replace the missing or damaged horn button on the steering wheel..
Check Stock

CDHPOWER 29'/700C Black Aluminum Mag Wheels - 66cc/80CC Gas Motorized Bicycle

  • Please note£ºexcluding bolts, size of Bolts to mag wheel:M5x23mm, if your sprocket is thicker than standard sprocket, we suggest bolts M5x25mm. Designed mainly for motorized bicycles.
  • do not need adapter, sprocket only needed.
  • put grease/lubricating oil on thread of wheel to prevent damage of thread from Riding£»inner diameter of rim:17.5mm/0.689inch.
  • Aluminum Wheels Excluding chain drive Sprocket£»Thread size: 1.375 inch X24T.
  • the hole spacing for front and rear wheel both 44mm, please see the last picture£»NOTE: It's inevitable that there will be SCRATCHES or PAINT PEELING during transportation, buy carefully if you are concerned..
  • Size for Wheel Axle: LxT(front axle): 160mm x 10mm.
  • light and very durable. 29"/700c Size Wheel.
  • the hole spacing for front disc brakes of mag wheel to be added is 44mm.
  • PLEASE NOTE 1: the best safe speed if racing: 35km/h£»Attention: Standard 9 hole sprockets 24T to 60T in Kit do not work on this alum wheel, buyer need drill 6 holes in middle to make sprocket fit on the alum wheel or buyer buy CDH multifunctional sprocket which fits well on CDH alum wheel.
Check Stock

Wheel Accessories Parts Hub Centric 5x120 Wheel Spacer 30mm Thread Pitch M14x1.25 Hub Bore 74.1mm Bolt-On Spacer Kit with Chrome Lug Bolts (1 Hub Centric Spacer, 5 Chrome & 5 Zinc Lug Bolts)

  • 1 Wheel Spacer with 5x120 to 5x120 Bolt Pattern, 74.10mm Center Bore (hub size), M14x1.25 Vehicle Lug Bolts (included), M14x1.5 Wheel To Spacer Lug Bolts (included).
  • Kit includes (1) Wheel Spacer 5x120 (5) Lug Bolts M14x1.25 Short head (5) Lug Bolts M14x1.5.
  • Eliminate the need for extended lug bolts.
  • Hub Centric Design: Fit tightly to the hub & wheel to reduce any type of vibration or false reading.
  • High tensile strength Aluminum Alloy and Grade 10 Hardware.
Check Stock