Reviews What Engines Will Fit In A 200mitsubishi

OTC 5020 Diesel Compression Tester for Hino Ford Cummins Navistar Detroit and Mitsubishi Fuso

  • OTC's easy-to-use compression tester is designed for use on multiple light and medium-duty diesel engines equipped with glow plugs.
  • Dual-reading gauge, with push-button release valve, measures compression to 1000 PSI and 7000 kPa.
  • hose end and adapters have quick-disconnect....
  • Includes the following adapters: No. 47484 - Hino diesel truck engines with 12 mm x 1.25 threads, No. 209633 - Ford 6.6L & 7.8L diesels, No. 217791....
  • No. 308472 - Mitsubishi Fuso truck 4D and 6D engines with 10 mm x 1.25 threads, No. 310810 - 1988-1996 Cummins C 8.3L 6 cyl. engines.
  • No. 310832 - Ford/Navistar 6.9L & 7.3L engines and Detroit 6.2L & 6.5L engines with 10 mm x 1.0 threads, and No. 310840 - Navistar DT466/DT359 engines.
Check Stock

ORIGINAL HOFFCO COMET 202312A Pulley Clutch Keyway 1/4 Built-in, 1\ Bore

  • Fits Between Alternator and Crankshaft Pulleys.
  • Fits 3000GT 3.0L DOHC & Turbo Engines, Diamante 3.0L DOHC Engine , Compatible with Dodge Stealth.
Check Stock

Eclipse Eclipse Fit Clip Plus BL 8GB 1.8 MP3 + Video Player (Blue)

  • Interchange Part Number: MR-970563, MB642442.
  • Compatible With: Fit for Mitsubishi 3000GT 1991-1999.
  • Compatible With: Fit for Mitsubishi Mirage 1992-2002.
  • Fit for Mitsubishi Montero Sport 1997-2004.
  • Fit for Mitsubishi Outlander Sport 2011-2013.
Check Stock

AEM 30-3511 Infinity 6/8h Plug in Play Jumper Harness for 2003-2005 Mitsubishi Lancer Evolution / EVO 8 VIII

  • AEM’s Plug & Play harness for Mitsubishi Evo engines includes a Wideband O2 connector, AEMnet connector for communication with other AEMnet enabled devices and an auxiliary connector with a Deutsch DTM 12P connector for adding common aftermarket sensors including fuel pressure, air inlet temperature, MAP, oil temperature and ethanol content sensor..
  • The expansion port also includes a sensor ground, 5v reference, 12v power from relay and high side output for activating a relay or solenoid, a low side output for boost control and analog inputs for mode switch and no-lift shift..
Check Stock

SOFO GX160 Ignition Coil Module - GCV160 Ignition fits Predator 212 Spark Plug Pack, Honda GX200 Engine, Parts For Honda GX160 Predator Coil Replacement for Champion 196CC Coleman CT200U 5.5/6.5HP

  • Fit for Honda 5.5 HP 6.5HP Engines including GX110, GX120, GX140, GX160, GX200 Gas Engines.
  • Fit for Honda 159CC 196CC 208CC 212CC 224CC Lawn Mower/Engine/Generator/Pump/Snow Blower/Pressure Washer.
  • Fit for Champion Power Equipment 196CC 6.5HP 3500/4000 Watts Gasoline Generator.
  • Fit for Predator 212CC Engine and Predator 3500 Watts Ignition Module. For 3500/4000W Engine Generator..
  • Fit for Honda part number:30500-ZE7-023, 30500-ZE7-033,30500-ZE7-043, 30500-ZE7-063,30500-ZE1-023, 30500-ZE1-03330500-ZE1-043, 30500-ZE1-053,30500-ZE1-063, 30500-ZE1-073,30500-ZG9-801.
  • For Coleman CT200U, BT200X, KT196 Powersports. For Honda 8 hp engine, Nikota 3500 parts, replacement coil..
  • Compatible with Harbor Freight Predator 212CC 6.5HP Go Kart OHV Engine.
  • Compatible with Baja Warrior Heat MB165 MB200 163CC 196CC 6.5HP Mini Bike. For gx270 honda engine, honda 8 hp engine..
  • Package includes 1 Ignition Coil, 1 Spark Plug, and 1 On/Off Switch. These products are brand new and high quality. Well-packaged products will be directly shipped from our warehouse in the USA..
  • 30-day return policy applies to all SOFO products..
Check Stock

Gzwog VLT-HC5000LP/VLT-HC7000LP/RLC-032 Replacement Projector Lamp Bulb with Housing for Mitsubishi HC4900 HC5000 HC5000BL HC5500 HC6000 HC6050 HC6500 HC7000 and for Viewsonic Pro8100 HD9900

  • Gzwog Replacement Lamp Fit for projector:Mitsubishi HC4900 Mitsubishi HC5000 Mitsubishi HC5000BL Mitsubishi HC5500 Mitsubishi HC6000 Mitsubishi HC6000BL Mitsubishi HC6050 Mitsubishi HC6500 Mitsubishi HC7000.
  • Gzwog provides high quality, high brightness, long life, good stability, original brightness, accurate matching Projector Lamp..
  • Gzwog Lamp's lifetime approximately 2500-3000 hours and 180 days warranty..
  • Gzwog Lamp's must be tested before delivery, please feel free to use it..
  • Gzwog provide the best quality return service and friendly customer service, all messages will be answered as soon as possible..
Check Stock

Trkimal Centrifugal Go Kart Clutch 3/4' Bore 10 Tooth 10T Fit for #40/41/420 Chain 6.5HP - Upgrade Clutch Compatible with Predator GC160 GC190 GX120 GX140 GX160 GX200, Go Kart Fun Kart Mini Bike

  • 10Teeth 3/4" Shaft Bore Sprocket for 40/41/420 Chain 212cc Predator Engine Belt Drive Centrifugal Clutch.
  • Perfect Fit for Go Kart Minibike Baja Mini Bike MB165 & MB200 and Genrator.
  • The Clutch fit 2 - 6.5 HP 168 188 Gasoline Engines for go kart, Generator compartible with Cloned Engines GC160, GC190, GX120, GX140, GX160, GX200 Briggs & Stratton and 2 - 6.5 HP With 3/4" Shaft Tecumseh Engines.
  • For Motors No More Than 200 cc Only, Screws and Chain NOT Included..
Check Stock

Lisle 54810 Master Harmonic Balancer Puller Kit

  • The kit Includes a standard Harmonic balancer puller, pulling screws, adapters for 3300 and 3800 GM V6 engines, and a Harmonic damper pulley puller for Chrysler, GM, Mitsubishi, and Dodge.
  • Includes new interchangeable puller jaws for 3.6L V6 Chevrolet Camaro and Dodge 5.7L Hemi.
Check Stock

Juki DDL550 LockStitch Industrial Sewing Machine Table,servo Motor,lamp,Made in Japan DIY

  • Specifications SPEED: 200-3700 spm MAX STITCH LENGTH: 5mm MAX PRESSER FOOT LIFT: 10-13mm LUBRICATION TYPE: Automatic (oil bath type) NEEDLE TYPE:DBX1 #11~#14.
  • Siruba's newest lockstitch plain machine is a smooth, quiet, power efficient industrial straight stitch Plainsewer 003e DIRECT-DRIVE NEEDLE POSITIONING LOCKSTITCH MACHINE. 003e MECHATRONIC INTEGRATION WITH BUILT-IN CONTROL BOX AND CONTROL PANEL. IT IS EASY TO INSTALL AND OPERATE. 003e DIRECT-DRIVE SERVO MOTOR (110Volts) IS SPEEDY, ACCURATE, AND ENERGY-SAVING THAN CLUTCH MOTOR BY 60%. 003e USER FRIENDLY: EQUIPPED WITH LED LIGHT, BUILT-IN BOBBIN WINDER, AND HALF STITCH FUNCTION..
  • Product Type Direct-Drive Needle Positioning Lockstitch Machine WHAT'S IN THE BOX : SIRUBA DL720-M1 machine head + TABLE STAND PLEASE NOTE! WILL BE DELIVERED UNASSEMBLED, will be delivered in 2 boxes, no detailed instructions for assembly. Highly Recommended to have a sewing technician to set up the machine..
  • The Presser Feet are compatible with VIRTUALLY ALL High-Shank, Single-Needle Industrial Sewing Machines, including:JUKI Style INDUSTRIAL Single Needle (DDL-8300 8500 8700 AND OTHERS) Sewing Machines ARTISAN BROTHER CONSEW COLUMBIA JUKI MITSUBISHI NAKAJIMA REX SINGER TAIKO..
Check Stock

MKING Roof Rack Cross Bars, Roof Bars,47' Universal Cross Bars,Adjustable Car Roof Rack Cross Bars Fit 30''-44.8'',Aluminum Crossbars for Most SUVs Carrying Rooftop Cargo with Anti-Theft Lock.

  • "2020 outlander mitsubishi limited edition".
  • 【Compatible models ②】2020 mitsubishi outlander SE.
  • "2015 ford flex (with factory installed raised rails)".
  • 【Compatible models ③】2013 kia sorento.
Check Stock

Tool Town

  • ...011 - 2019 Journey | 2014 - 2019 o Cherokee | 2011 - 2019 Grand Cherokee | 2012 - 2018 Wrangler | & more..
  • Replaces Part# 10200A, 10202, 10369A, 10200A-1, 10200A-2, 10200A-3, 10202A, 10200A1, 10200A2, 10200A3 applicable for vehicles with the 3.6L Pentastar Engine. Please take note that this would only work for these engines with VVT (Variable Valve Timing) and will not work for VVL (Variable Valve Lift) type of engines. 2011 models and up will need 10369A which is included in the kit..
  • OEM Fit, Quality, Finish - While this is NOT a genuine OEM part, it is a direct replacement tool manufactured by AA Ignition and will fit, look and function like the original wedge locking tool kit. This kit also includes 10200A-3 which is a locking pin for the camshaft tensioner. These difficulty of using this tool kit is very simple but is advised to be done only by professionals. Application includes model with years 11, 12, 13, 14, 15, 16, 17, 18, 19..
  • Lifetime Warranty - This timing repair tool kit for Pentastar 3.6 Liter engine comes complete with a lifetime warranty. If the part ever fail or break on your Town & Country, Grand Caravan, Ram ProMaster, Cherokee, Ram 1500, Charger simply contact us for a replacement..
Check Stock

Raybestos 980670R Professional Grade Disc Brake Rotor

  • PREMIUM GRADE: Raybestos R-Line Brake Rotors offer quality replacement brake rotors for everyday driving conditions in cars, light trucks and SUVs.
  • OE SPECIFICATIONS: Developed from OE samples and made with G3000-qualified material, ensuring form, fit and function for dependable braking performance.
  • PRECISION BALANCED: Mill balanced edges for vibration-free parking, extended pad life and quieter, smoother stopping.
  • RIGOROUSLY TESTED: Meets the SAE standard for tensile strength, providing structural integrity and a maximum service life.
  • VEHICLE FIT: Chrysler 200 2011-2014, Cirrus 2009-2010, Sebring 2007-2010.
  • Dodge Avenger 2008-2014, Caliber 2007-2012.
  • Jeep Compass 2007-2017, Patriot 2007-2017.
  • Mitsubishi Lancer 2008-2014, Outlander 2007-2012, Outlander Sport 2011-2012, RVR 2011-2012.
Check Stock

Go Kart/Mini Bike Clutch Centrifugal Clutch Engine Clutch 5/8 Inch Bore #35 Chain 12 Tooth 12T Chain 6.5HP

  • Fit 2 - 6.5 HP Small Engines Parts Honda GC160, GC190, GX120, GX140, GX160, GX200.
  • Go Kart Minibike Belt Direct Drive Fun Kart Centrifugal Clutch 3 4 Bore 12 Tooth #35 Chain.
  • Fit Briggs & Stratton 2 - 6.5 HP with 3/4" Shaft 212 212cc Predator Engine Clutch.
  • Fit Centrifical Tecumseh Engines 2 - 6.5 HP with 3/4" Shaft and Any Other Go Cart Motor Auto Engines with 3/4 Crank Shaft and 3/16" Key Way.
  • 3 4 inch Bar Centrifugal Clutch Performance Parts.
Check Stock