TALOOS 4" Wet Drill Core Bits for Concrete and Hard Masonry, Diamond Core Drill Bits for Marble, Granite, Rocks and Bricks | 16.15" Drilling Depth, 10mm Segment Height, 1-1/4"-7 Arbor | Wet Only
- 【DIAMOND WET CORE DRILL BIT】It comes with a 4" Wet Drill Core Bits. This core bit can be used for wet drilling to meet your work needs. Start drilling from a vertical position and continue digging deeper. A small amount of water can extend Long life. If you are looking for a reliable core drill, this is a good choice!.
- 【WILDLY COMPATIBILITY】The size of this wet drill core bits is 4"/ 102mm Diameter & 16.15" Drilling Depth & 1-1/4"-7 Arbor, 1-1/4"-7 universal thread let it can be easily and quickly assembled to a standard stationary coring machine or a handheld drill. 16.15" drilling depth can meet most drilling depth needs. It also works with a variety of devices, easy to carry, greatly helping you with drilling tasks..
- 【UPGRADED DESIGN】Our diamond wet core drill bits feature chip removal holes, not easy to be stuck when drilling. Adopt highly regular serrations, and concentric shaft design, the innovative design enables high drilling performance while maintaining a long service life..
- 【PREMIUM QUALITY】The drill body of this wet core drill is composed of 20 steel, and th....
Check StockHBKEEN Core Drill Bit for Concrete Diamond Laser Welded Core Bits 1-1/4"-7 Threaded for Hard Concrete Brick and Block (8 inch）
- {Specification} 8 inches Laser Welded Diamond Wet Drilling Core Bits.
- {Drilling Depth} 14" with mesh segments. Fast,smoothly, long life.
- {Application} #30/40 diamond grit, designed for drilling concrete, reinforced concrete, hard brick, block and other hard masonry.
- {Drilling method} Wet use only. Hand held drill, drilling machine.
Check Stock
Happybuy Diamond Core Drill, 2180W 7\/180 mm, 1600RPM Variable Speed Core Drill Rig with Portable Case, Handheld Drilling Machine for Hard Stone, Concrete, Marble, Granite, Brick
- 7 inch Max Drilling Diameter: 2180W powerful motor of the handheld core drill rig is designed for wet drilling in reinforced concrete, stone, asphalt, marble, ceramic, walls, floors, and more. With a 7"/180mm max drilling diameter and 1600RPM stepless speed, you can drill with less effort..
- Durable Steel Output Shaft & Copper Inlet: As the machine will work upside down, water will unavoidably flow on to the drill machine. In this case, our drilling rig has a rustproof steel forged output shaft and waterproof copper water inlet for a long-lasting water supply..
- Over-current Protection: We also provide an overload protection system and an upgraded cooling system. They are designed for avoiding burn-in and prolonging the service lifespan of the drilling press machine..
- Comfortable Shoulder Rest & Handle: The upgraded shoulder rest is designed to save your energy. The slip-proof rubber handle greatly enhances friction and reduces vibration to completely control the hammer with comfort. Besides, tools are well stored and sorted in a compact case..
- Wide Range of Application: The wet diamond core drilling rig can be widely used in drilling reinforced concrete, red brick, marble, and other materials. It is perfect for installing air conditioners, pipes, stair ra....
Check StockThe Book of Five Rings
- 14 inch Max Drilling Diameter: Our core drilling machine generates extreme power because of its 4800W copper motor. Maximum Speed: 500RPM. Maximum....
- Durable Construction: As the machine will work upside down, so water would unavoidable flow on to the drill machine. In this case, our drilling rig....
- Thoughtful Security Design: We also provide overload protection system and an upgraded cooling system. They are designed for avoiding burn-in and....
- Ergonomic Handle & Stable Base: It features an ergonomic handle and large base support for effortless drilling or getting oblique holes. The aluminum....
- Wide Application: The wet diamond core drilling rig can be widely used in drilling reinforced concrete, red brick, marble, and other materials. It is....
Check StockSHDIATOOL Diamond Core Drill Bits 3 Inch for Hard Stone Concrete Marble Granite Brick Laser Welded Dry or Wet Hole Saws 75mm
- 3"(75mm) Laser Welded Diamond Dry Drilling Core Bits..
- Diameter:75mm(3 inch), Total length: 100mm, Thread: 5/8-11..
- Dry or Wet Drilling - use wet will greatly prolong the segment life.
- Designed for drilling hard granite, marble, engineering stone, concrete, brick.
- Need an adapter for drill or other machine, such as SDS,hex,Round plus shank.
Check StockSHDIATOOL Diamond Core Drill Bits 2 Inch for Hard Stone Concrete Marble Granite Brick Laser Welded Dry or Wet Hole Saws 50mm
- 2″(50mm) Laser Welded Diamond Dry Drilling Core Bits..
- Diameter: 50mm(2 inch), Total length: 100MM, Thread: 5/8″-11..
- Dry or Wet Drilling – use wet will greatly prolong the segment life.
- Designed for drilling hard granite, marble, engineering stone, concrete, brick.
- Need an adapter for drill or other machine, such as SDS,hex,Round plus shank.
Check Stock
Virginia Abrasives 425-03041 Diamond Drill Core Bits For Tools & Home Improvement – Premium Diamond Concrete Drill Bit For Brick, Concrete, & Masonry – General Purpose Wet Cutting, 4″ x 14″ x 1-1/4″-7 in Size
- PREMIUM CORE BIT LINE: Our diamond core drill bits are manufactured with a high concentration of industrial diamonds so they will stand up to the heavy workload of your project. Our core drill bit line has 7.5 mm general-purpose segments that offer precision for drilling concrete, block, masonry, natural stone, and hardscape aggregates. Diamond drilling produces little dust.
- MULTI-COMPATIBLE: Core drill bits, when used with a compatible core drill, work well to drill holes in stone, concrete, and masonry so you can finally finish your long-term or urgent projects! At Virginia Abrasives, we emphasize your convenience.
- that’s why we created masonry drill bit/concrete tools that are compatible to use as a core drill or wall drill for concrete, masonry, general-purpose concrete, and asphalt..
- CLEAN CUTS & DRILL: Our diamond core drill bit is known for its clean cut and will give you much more reliability for a more pristine drilling result! Cutting is more accurate using our diamond bits so there is less chance of structural integrity being compromised. Our concrete drill bits are portable, and can be used in situations where space is limited..
- PROPER CARE & INTENDED USE: These home improvement tools are intended for....
Check StockSHDIATOOL Diamond Core Drill Bits 1-3/8 Inch for Hard Stone Concrete Marble Granite Brick Laser Welded Dry or Wet Hole Saws 35mm
- 1-3/8"(35mm) Laser Welded Diamond Dry Drilling Core Bits..
- Diameter:35mm(1-3/8 inch), Total length: 100mm, Thread: 5/8"-11..
- Dry or Wet Drilling - use wet will greatly prolong the segment life.
- Designed for drilling hard granite, marble, engineering stone, concrete, brick.
- Need an adapter for drill or other machine, such as SDS,hex,Round plus shank.
Check StockCayken SCY-18-2EBM 5in. Wet and Dry Core Drill Rig and 400F Stand
- Will cut up to 6-1/2-inch diameter holes..
- For use on concrete, brick, stone, rock, ceramic, and fireproof materials..
Check StockDry Diamond Core Drill Bit,HIGHDRIL 2pcs Diameter 25mm 1″ with Triangle Shank Vacuum Brazed Hole Saw for Concrete Granite Marble Glass Porcelain Tile Masonry Brick
- Diameter 25mm 1″,diamond length 10mm,total length 65mm,Triangle shank..
- Vacuum dry/wet brazed diamond drilling bits Core bits with triangle shank..
- Can be used without water,Dry or wet drilling..
- Triangle shank design can be gripped tightly that won’t slip out easily,used in 10mm (3/8 in) Hand Drill, Bench Drill..
- Multi-purpose drilling for granite & marble,masonry,concrete,tile/ceramic,stone,etc..
Check Stock
TOOLGAL Diamond Core Drill Bit 5" for Masonry - Wet Drilling of Concrete/Reinforced Concrete - Laser Welded Diamond Segmented - 11/4" UNC for Fixed or Hand-held core Drilling Machines
- SPECIFICATIONS - This diamond core drill bit made of premium metal components and high quality diamond grits - Diameter: 5" - Useful length: 18.7” - For wet drilling ONLY - Max RPM 470..
- SMOOTH FAST DRILLING - This premium core drill bit is produced specifically for wet drilling of concrete and reinforced concrete..
- ENGINEERED FOR EXACT FITTING - With 11/4" UNC connection, this core drill bit allow easy and fast assmbling to common fixed core or hand-held drilling machines..
- FOR THE PERFECT JOB EVERY TIME - The innovative design of this diamond core drill bit allows it high drilling performance while keeping a long lifetime. Whether you are a plumber, construction worker, or DIY enthusiast this segmented core drill bit is made for you..
- TOOLGAL, A NAME YOU CAN TRUST - For over 50 years TOOLGAL has been a global leader of masonry diamond tools developing and manufacturing. When you buy this core drill bit or any other tool from TOOLGAL, you are purchasing it directly from the factory..
Check StockHIGHDRIL Diamond Drill bits kit with 5/8-11 for Porcelain Porcelain Tile Ceramic Marble Brick Concrete Vacuum Brazed Hole Saw (25/35/45/65/75mm+20mm Finger Bits+50mm Beveling Chamfer Bit)
- Vacuum dry/wet brazed diamond drilling bits Core bits with 5/8-11, 25/35/45/65/75mm+20mm Finger Bits+50mm Beveling Chamfer Bit, Each Size 1Pc.
- Whether ceramic, tiles, porcelain tile, granite, marble, stone, masonry or brick, this kit is suitable for all these materials drilling.
- High quality and Durability: This tiling installation kit is made of high quality diamond and steel by vacuum brazed diamond technology, providing very high efficiency, drilling faster, durable and sturdy.
- Machine: Compatible with most angle grinders for dry/wet drilling. For use with electric drills, an SDS or HEX shank adaptor needs to be fitted. Recommended speed 6000RPM, maximum speed 11000RPM..
- Aluminium portable suitcase included for easy carry and storage and protect of the core bit.
Check StockWet Drill Core Bits for Hard Concrete, Brick, and Block - 4\ Diameter 1-1/4\-7 Threaded #30/40 Diamond Grits
- #30/40 diamond grit, designed for drilling hard concrete, masonry, hard brick, and other hard materials.
Check Stock
