Reviews Welding Router Clamp

WYNNsky Magnetic Welding Support Ground Clamp, 2pcs Set, Single and Double Welding Head, Copper Tail

  • Design: This magnetic clamp attaches easily to any smooth metal surface, flat or curved. It holds on tightly, without budging easily. Super suction magnet at the bottom, large suction power, long-lasting magnetism..
  • Application: This device serves as the ground point, which you can take with you anywhere. Simply tack this onto a convenient spot, hook up your safety wire and you're ready to weld..
  • Material: The welding magnet head adopts high quality material, durable and solid. Has brass tail has good welding stability, durable, anti-rust, has good performance and long service life..
  • Advantage: This magnetic clamp is handy to have in such situations. You can stick in on a car body and not have to damage the paint. The clamp can also be attached to metal poles, struts, railings or the welding table..
  • Including 1pc Single Head Magnetic Welding Ground Clamp.
  • 1pc Double Head Magnetic Welding Ground Clamp.
  • 1pc Copper Tail Welding Stability Clamps..
Check Stock

VCT 24 pc Butt Welding Clamps Weld Sheet Metal Auto Car Door Skin Panel Fender New

  • Suitable for metal straight panel or curved panel complex industry. These small fixtures hold panels of any shape anywhere-edge-to-edge, and are fully fixed before butt welding, leaving only a small gap that allows the weld to fully penetrate. Once the two parts are tack welded together, the wing nut is loosened, and the elbow lever is removed and the clamp is removed from work before final welding..
  • To align and clamp sheet metal panels for precise spot welding,butt welding,edge-to-edge welding and tacking in place.
  • For precise spot welding, positioning, butt welding and edge-to-edge welding, fully align and clamp the metal plates..
Check Stock

Adjustable Toggle Clamp 12 Pack 201-B Style Quick Release Toggle Latch Hold Down Clamp Antiskid Red Horizontal Clamp 360Lbs Holding Capacity Quick Release Woodworking Tool

  • Material: Cold-rolled carbon steel with zinc plated coating for corrosion resistance.
  • Oil and stain resistant red vinyl hand grip..
  • Easy Install: Simply attach the hold down clamp to the door or box with screws and you can easily install them (M4 or M5 screws, doesn’t come with screw)..
  • Application: A rock-solid grip to install on jigs, tool fixtures, or movable bases, during clamping, the lever is controlled to prevent impact on functioning due to side thrust..
  • Hold-down toggle clamp, u-shaped clamping bar, ideally suitable for quickly holding down circuit boards, paper, for machine operation, welding, jigs to sand, cut, router,woodworkings, etc..
Check Stock

QISF 6 Pcs Magnetic Welding Head, Welding Ground Clamp, Magnetic Welding Support,Strong Magnetism Large Suction,Copper Tail Welding Stability Clamps(2 Sets)

  • 【Feature】-- This magnetic clamp is easy to attach to any smooth metal surface, flat or curved.Strong magnetic grip which can make you welding Work more easy and simple..
  • 【Convenient work】-- Undamage the surface or car's paint,this magnetic clip is very convenient..
  • 【Wide Fits】-- The clamp can also be attached to metal poles, struts, railings or the welding table..
  • 【Material】-- Copper / Insulation Board.
  • 【Package】-- 1Pcs Single Head Magnetic Welding Ground Clamp.
  • 1Pcs Double Head Magnetic Welding Ground Clamp.
  • 2Pcs Copper Tail Welding Stability Clamps.
Check Stock

Jacazooy Welding Electrode Holder 4.9ft Stick Copper Plier Ground Clamp MMA Mini Welding Rod Copper Clamp Tool Accessories With Cable

  • ✔️The goods are mixed in black and white and shipped randomly. Please don’t take the order if you mindThe Welding Electrode Holder is made of all copper clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use..
  • ✔️The Welding Ground Clamp is suitable for a welding arc.Features wide grip jaws to ensure a firm connection.Grounds work to be welded to a good electrical ground earth..
  • ✔️ This welding accessories is made of copper clamp head, strong current.It is not easy to scald with pure copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion..
  • ✔️The welding accessories have a common advantage: Copper guide, pure copper wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force..
  • ✔️ The Welding Electrode Holder with cable is 6.5ft long and the Welding Ground Clamp with cable is 4.9ft long. Please allow the manual measurement data to deviate slightly. (0.1-0.2ft error).
Check Stock

FLKQC Butt Clamps 16 pcs Butt Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding Butt Clamp

  • Butt Clamps Specification:Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • How To Use Butt Welding Clamps : Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Great Quality Butt Welding Clamps: Panel welding clamps are constructed of galvanized steel material to ensure maximum durability and strength while resisting rust.
  • Butt Clamps Wide Application: Use the Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Butt Clamps Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

4 Pcs Locking C Clamp Set Locking Pliers with Fixed and Swivel Pads 6 Inch 9 Inch 11 Inch Metal Tools Welding Clamps for Home Farm

  • Locking C Clamp Set: 4 welding clamps are included, including 1 piece of 6 inch locking C clamp with fixed pad, 1 piece of 6 inch locking C clamp with swivel pad, 1 piece of 9 inch locking C clamp swivel pad and 1 piece of 11 inch locking C clamp with swivel pad, meeting your everyday needs.
  • Sturdy to Use: the jaw is forged with carbon steel as a whole, featuring with good toughness.
  • The handle of stamped steel plate, clamping object without deforming.
  • The heat treatment adjusting rod is easy to adjust the suitable size.
  • Additionally, the serrated jaw of locking C clamp has a strong clamping force.
  • Adjustable Design: the locking C clamp is easy to adjust to the appropriate clamping size because of the fine tuning knob design.
  • The quick release handle is convenient and labor saving.
  • Moreover, the spring provides good tensile force.
  • Firm Locking: welding clamps are mainly applied for clamping parts for riveting, welding, grinding and other processing.
  • Since the jaw can generate large clamping force, the clamped objects will not loosen.
  • Essential Supplies: in daily life, the lock C clamp is suitable for electricians and welders to clamp welding boards.
  • And woodworkers can use this metal tool to quickly clamp boards or frames.
Check Stock

SKIL SRT1039 Benchtop Portable Router Table

  • ABOVE THE TABLE ROUTER LIFT: Gain convenient access to router bits with the Above Table Adjustment provided by the SKIL SRT1039 all-inclusive Router Table.
  • INTEGRATED BIT STORAGE: Protect and store router bits with a double door, quick latch integrated bit case. This integrated bit storage saves you time and provides a central location for easy to lose bits.
  • PRECISION ROUTING: Router tool features a flat laying aluminum miter gauge slot, aluminum mounting plate, router clamp, and two featherboards for durable, accurate routing.
  • LARGE ALUMINUM FENCE: The tall 16-inch aluminum fence measures 24 inches wide and can handle tall stock with ease, while the fence is complete with adjustable MDF face plates and a starter pin and guard for smooth operation with taller work pieces.
  • TWO FEATHERBOARDS: Two easy to use, adjustable router edge guides attach to the fence and router table to provide additional guidance and protection against kickback.
  • ROUTER CLAMP: Allows you to easily access tools attached underneath the table.
Check Stock

Welder Machine Accessories 5 in 1 Stick Welding Electrode Holder 300A Assembly with 12ft Cable 10-25 Cowhide Gloves Mask Helmet Ground Clamp Hammer

  • ✅Package Content: Electrode holder with 12ft cable/ cowhide welding gloves large / simple mask / 300 amp ground clamp/ slag hammer.
  • ✅HIGH-QUALITY ground clamp:Made from qualified materials,the earth clamp has excellent clamping power and superior electrical connections. SUITABLE FOR:Stick welding, submerged arc welding, gas metal arc welding and gas tungsten arc welding applications..
  • ✅Cowhide Gloves:Carefully selected high-quality split cowhide is exceptionally durable and puncture resistant, protecting hands from the hard environment in a wide variety of tasks.
  • ✅300A Electrode holder with cable:300 Amp Welding Electrode Holder Lead Assembly - Dinse 10-25 Connector - #2 AWG cable (12 ft).
  • ✅5 IN 1:Multi-purpose household and welding repair tool kit.
Check Stock

hynade Brass T-Style Welding Ground Clamp 300-Amp Wide Jaw Clamp Tool

  • Ground clamp size :7 inches long, 1.18 inches max chin opening.
  • The welding ground clamp adopt high-quality brass material, sturdy structure, strong grip, multifunctional wide-jaw grounding clamp.
  • The clamp tool suitable for most grounding situations, specially designed for heavy-duty high-current welding applications/MIG/MMA/TIG/plasma welding/cutting machines.
  • Large contact surface area provides good cable connection and positive grounding.
  • If have any questions, please contact us and we will provide you with 100% satisfactory service.
Check Stock

4 PCS Push Pull Adjustable Toggle Clamp, Quick Release Hand Tool for Woodworking, 500Lbs Holding Capacity Toggle Latch, GH-305C Stroke Clamp for Welding, 32MM

  • 【4 Pack 32MM Toggle Clamps】 GH-305C Model, Straight-Line Action Clamps, 180 Degree Handle Opening Angle, Holding Capacity：227 kg/ 500 lbs.
  • 【Easy Adjustable】Maximum overall length is 6-1/2”, lock up range from 5 to 6-1/2 inches long.
  • Clamping force is quite stable and reliable..
  • 【3 Heavy Duty Compositions】These quick release toggle clamp consists of a flange base plate for installing the toggle clamp firmly, adjustable pressure tip for flexible clamping, and ergonomic ribbed-plastic handle for safe and comfortable operation..
  • 【Soild Materials】Made of zinc-plated, cold-rolled carbon steel that resists corrosion, be used for a longer time..
  • 【Ideal for Clamping Jig】 Ideal for welding, moulding, jointer jig for table saws, cabinet cases or router tables, fixtures, assemblies and movable bases..
Check Stock

ABN Butt Welding Clamps - 8 Piece Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • [Perfectly Align Panels] Use the ABN Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • [Fits your Project] Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • [Easy to Use] Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 8 clamps for larger projects, then joint weld between them.
  • [Built to Last] Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • [Contents] Welding accessories set includes 8 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Toolly Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding, Pack of 16 (1 inch x 1 inch x 2.1inch)

  • 【Product Purpose】Butt welding clamps set includes 16 welding corner square welder clamps, which can be used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects. They are good accessories to help you to find the location quickly in repair work..
  • 【Perfectly Align Panels】Using the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • When these metal clamps hold panels edge-to-edge with a gap of 1mm, you can quickly weld the sheets together..
  • 【Applicable Types】Each welding square tool pipe clamp can extend the clamp block to provide a 4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials..
  • 【Easy To Use】Loosen the winged nut from the alignment screw and then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to make sure a firm fixation.
  • Use all 16 clamps for larger projects, then perform joint welding between them..
  • 【High Quality & Portable】These panel welding clamps are made of high quality matrial, which makes sure the durability and strength.
  • meanwhile, these clamps are in small size can be easily placed in your pocket or welding equipment tool bag..
Check Stock