Reviews Welding Quick Connector

RIVERWELD TIG Welding Cable Panel Connector-plug and Socket Dinse Dinze Quick Fitting 4 DKJ35-50 & DKZ35-50

  • TIG Welding Cable Panel Connector Socket Quick Fitting Dinse-Style, Rated Current: 315amp Wire Section: 35-50mm2 Socket Mounting Size:....
  • 1pcs : DKJ35-50 315A Euro Style Cable Connector-Plug(with Black Color).
  • 1pcs : DKZ35-50 315A Euro Style Cable Connector-Socket.
  • 1Pcs DKJ35-50 Euro Style Cable Connector-Plug (with Red Color).
  • 1Pcs DKZ35-50 Euro Style Cable Connector-Socket (with Red Color).
Check Stock

RX WELD Welding Cable Quick Connector Pair DINSE-Style (200Amp-300Amp (#4-#1) 35-50 SQ-MM 2-set)

  • Welding cable quick connector male-female pair with accessories..
  • DINSE style connection. For AWG wires #4-#1 (35-50 sq mm) with 200Amp-300Amp current rating..
  • You get Two (2) quick cable connector pairs 200Amp-300Amp with accessories at this price..
  • Amazon satisfied customer service & fast ship.Please provide a deliverable address..
Check Stock

WARN 22680 Quick Connect Winch Power Cable Connector Plugs, 1 Pair

  • ...greatly enhances the electrical conductivity, which helps prevent ignition when large current passes, and ensures stable current transmission.
  • the copper terminal of battery quick disconnect kit is convenient for cold pressing, welding, and faster and firmer wiring.
  • {SPECIFICATIONS AND PACKAGING of the BATTERY QUICK CONNECTOR SET } Voltage: 12-36 volts DC.
  • the package contains 6 groups of 6 to 10 battery quick connectors, including 6 connectors, 12 terminal pins, 6 caps, the quantity is enough to meet your different Demand or replacement.
  • {EASY TO INSTALL}: You can quickly install the plugs of these battery quick disconnect connectors, insert the wires into the terminal pins, and then perform welding or crimping. The ends of the connectors are the same, so both ends are suitable for connecting to the power or load side.
  • {WIDE APPLICATION of the QUICK CONNECT PLUG PACK}: Provide a simple and convenient way to connect/disconnect power to winches or other electrical equipment, such as remote battery chargers, power inverters, solar devices, forklifts, electric bicycles, electric sightseeing vehicles, etc..
Check Stock

300A 16㎡ Copper Clad Aluminum Cable Dinse 10-25 Connector Plug Welding Leads Assembly Set 9.8ft Welding Electrode Holder and 6.5ft Stick Plier Ground Clamp for ARC Stick MMA Mini Welding Rod Welder

  • ✨ This kind of Welding Electrode Holder is made of Copper Clad Aluminum clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use.
  • ✨ The Welding Ground Clamp is also suitable for stick,tig,mig or cut welding.Features wide grip jaws to ensure a firm connection.Grounds work can be welded to a good electrical ground earth.
  • ✨ 9.8ft long Welding Electrode Holder with cable and 6.5ft long Welding Ground Clamp with cable. 16㎡cable,Dinse 10-25 connector.*-*Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits*-*.
  • ✨ This Welding Leads Assembly Set has a strong current(300A).It is not easy to scald with copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion.You will receive a ready to use fully assembled lead, no tools required.
  • ✨ This set of welding accessories have a common advantage: Copper guide, Copper Clad Aluminum wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force.
Check Stock

ZHANGM 2Pcs Car Degreaser Accessories, Ground Points, Car Dent Repair Spare Parts, Stud Welding Machine, Grounding Connector, Car Body

  • Simple to use: Pump the plunger just a few strokes, the cup will attache the surface completely and hold suction for more than 6 hours. Release Valve Lever Permits Quick and Complete Release..
  • Car Spotter Accessories Spot Earth Car Dent Repair Spare Parts Stud Welding Machine Ground Connector Auto Bodywork Spotter Tools With netic.
  • No need to hold the connector, easily work..
Check Stock

USB Female Type-B Port 4-Pin Right Angle PCB DIP Jack Socket-White 10 Pack by MUZHI

  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

uxcell 17pcs DIP IC Chip Socket Adaptor Round 28 Pin 2.54mm Pitch Dual Row 15.24mm Row Pitch

  • Row to Row Distance(Approx):15.24mm/ 0.6".
  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

uxcell 20pcs DIP IC Chip Socket Adaptor Solder Type 2.54mm Pitch Dual Row 8 Flat Pin 7.6mm Row Pitch

  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

VELLEDQ Field Assembly Sensor/Actuator Panel Mount Connector M8 3-Pin Female A-Coding Rear Flange Joint

  • 3 Pin Connector Specifications: The working voltage of the 3 Pin waterproof power connector can reach 125VAC, and the rated current is 5A. General wire diameter: Φ3.0mm～Φ6.0mm. Cable specification: 0.34 --0.75mm²/18-20 AWG. Contact resistance 003c5mΩ. Mounting dimensions: 12mm. Waterproof Protection level: IP67. Package list: 1 plug + 1 socket..
  • High-Quality Material: Our 3 pin connector uses a PBT material shell that imports from abroad with stability, compression, anti-explosion, and anti-deformation. Using gold-plated contact with the superior performance of corrosion resistance and electrical conductivity effectively deals with temperature rise..
  • Easy to Install Circular Connector: Cable connection type: Soldering. Cable in-line, threaded coupling, quick connect, solder plug & socket. Note: Prohibited to charged inserted. The wiring welding temperature requirement is 380℃±40℃, operation time: each point does not exceed 3 seconds. Note: Prohibited to charged inserted..
  • Perfect Waterproof Aviation Connector: The waterproof connector can be up to waterproof IP67 protection level when connected, its rigid spring snap fastening self-locking device waterproof ring is well in water-resisting. Even in harsh outdoor weather conditions, it can stil....
Check Stock

YaeTek 12PCS Oxygen & Acetylene Torch Kit Welding & Cutting Gas Welder Tool Set with Welding Goggles

  • Application - Welding and Cutting -- This YaeTek gas welding torch kit is used for cutting, welding, heating, with precision and efficiency..
  • Material -- heavy duty metal and brass, with high strength, durability, longevity. This welder torch Kit tool set is a great choice for both an amateur metalworker or a professional..
  • With a divisional box, convenient and easy to carry..
  • Packages Includes -- 3 copper pines, 1 welding pine connector, 1 cutting, 1 aluminum pin, 1 iron chrome-plated igniter, 2 copper joint, 1 wrench, 1 welding goggles, 1 storage box.
Check Stock

Miller 129527 Conn,Tw Lk Insul Male(Dinse Type)50 Series

  • Premium quality Dinse-style insulated cable connector pair (male/female) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
  • Insulated Dinse-type male connector is with .355" diameter pin (25-mm) and 1/2" diameter pin (35-50mm, 50-70mm and 70-95mm)..
  • Compatible with Dinse-type twistlock connectors in mainstream welders ( Miller, Lincoln, ESAB, etc.). Available connector sizes 16-25mm (small 0.355" pin, #4-#3), 35-50mm (1/2" pin, #2-1/0), 50-70mm (1/2" pin, 2/0-3/0) and 70-95mm (1/2" pin, 3/0-4/0)..
  • All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

3 Pin Connector, Waterproof Connectors, Aviation Connector for Industrial, Power, Car, and Other Indoor/Outdoor Electrical Connection (2Pcs, Solder, Metal+Plastic)

  • 3 Pin Connector Specifications: The working voltage of the waterproof power connector can reach 400VAC, and the rated current is 10A. General wire diameter: Φ3.0mm～Φ9.0mm. Cable specification: 1.0 --1.5mm²/18-16 AWG. Contact resistance 003c2.5mΩ. Mounting dimensions: 16mm. Waterproof Protection level: IP67. Package list:2pcs( 2 male plug + 2 female socket).
  • High-Quality Material: Our 3 pin connector uses a PBT material shell that imports from abroad with stability, compression, anti-explosion, and anti-deformation. Use metal material flanges seat, against high-frequency noise and electromagnetic interference. Using gold-plated contact with the superior performance of corrosion resistance and electrical conductivity effectively deals with temperature rise..
  • Easy to Install Circular Connector: Cable connection type: Soldering. Cable in-line, threaded coupling, quick connect, solder plug & socket. Note: Prohibited to charged inserted. The wiring welding temperature requirement is 380℃±40℃, operation time: each point does not exceed 3 seconds..
  • Perfect Waterproof Aviation Connector: The waterproof connector can be up to waterproof IP67 protection level when connected, its rigid spring snap fastening self-locking device waterproof ring is well in ....
Check Stock

3528 2-pin 8mm LED Connector kit led Strip Connector L-Shaped Connector 2-pin Right-Angle Connector T-Shaped Connector Solderless Seamless Connector Jumper Connector (8mm)

  • The LED connector kit is suitable for 2835 3528 2-pin 8mm LED light strips. It is easy to install. Connect the positive and negative poles of the connector. Just insert the light strip into the connector and clamp the cover. No need for welding and other processes.
  • Strip connectors include: 8 XL connectors, 2 XT connectors, 2 X female and DC connectors, 2 X DC power supply 2way distributors, 20X LED seamless connectors, 4 X 3825 2pin LED with pigtails Connector, 6 X 3528 2-pin LED light with jumper connector, 20 X set of screw fixing clips, 20 X self-adhesive light bar mounting clip.
  • Note: When the waterproof LED light strip is connected with these LED light strip connectors, the silicone on the surface of the welding area must be peeled off.
  • 2-pin 8mm LED connector supports 0-4A current and 0-24V voltage input, and the heat resistance rating is -20~100 degrees.
  • 100% satisfaction guarantee: GOOCHAN connector kits are sold with a 30-day money-back guarantee. If you have any questions about this product, please feel free to contact us. We will solve the problem for you as soon as possible after receiving the information.
Check Stock