Reviews Welding Filler Metals

KDGENG Fullkk Magic High Temperature Resistant Liquid Metal Welding Filler, Appliances Casting Repair Glue,Industrial Heat Resistance Cold Weld Metal Repair Paste for Metal, Plastic, Wood (20g)

  • 1. EFFECTIVE ADHESIVE AGENT –2022 New Fullkk Liquid Metal Filler developed as an alternative to torch welding, it provides strong and long-lasting repairs to metals and multiple other surfaces..
  • 2. HIGH-TEMPERATURE RESISTANT – Industrial Heat Resistance Cold Weld Metal Repair Paste Gel AB Glue Adhesive can withstand temperatures up to 150degC. When fully cured, it is as hard as iron and provides uniform bond line thickness.joiuple magic high temperature resistant liquid metal welding filler.
  • 3. EASY TO USE AND QUICK-DRYING-MIX – It has a 1:1 mixing ratio, sets in 6 minutes, and fully cured in 4-6 hours. Apply and let dry for a few hours. It will bond almost any clean surface that is free of dirt and oil..
  • 4. SUPERB BOND STRENGTH – It forms a strong and stable permanent bond that should last for ages.After curing, the adhesive layer has good toughness, is not easy to break, and is resistant to aging and oil stains..
  • 5. WIDE APPLICATION RANGE - Mainly used for filling of casting defects such as steel castings, blisters, pores, cracks, etc., and also suitable for repairing oil....
Check Stock

JRYX Fullkk Liquid Metal Filler, 2022 New Fullkk Magic High Temperature Resistant Liquid Metal Welding Filler, Appliances Casting Repair Glue, Versatile Dependable Liquid Metal Welding Filler (100g)

  • Liquid Metal Welding Filler: Developed as an alternative to torch welding, it provides strong and long-lasting repairs to metals and multiple other surfaces. It will bond almost any clean surface that is free of dirt and oil..
  • Metal Repair Paste High-Temperature Resistance: Welding glue for metal, can withstand a temperature of 150°C. When fully cured, it is as hard as iron and provides uniform bond line thickness..
  • Simple to Use: A permanent adhesive is formed after mixing, which can be shaped, beaten, filed, sanded, and drilled after curing. It has a 1:1 mixing ratio, 6 minutes setting, and complete curing within 4-6 hours. Before using the glue, clean and dry the surface and finish the work within 20 minutes after mixing..
  • Usage Scenarios: Surface applications: metal, plastic, pvc, concrete, wood, ceramic and tile and fiberglass. Use on: household, automotive, marine, plumbing, crafts, outdoor equipment, agricultural equipment, motorcycle, toys, boats, personal watercraft, in/outboard engines and deck and hull accessories..
  • Do It Yourself: No matter the gap is big or small, you....
Check Stock

WeldingCity 4-pcs Low Temperature Flux Cored Zinc/Aluminum (Zn98-Al2) Brazing Rod 20″ for Joining Al-Al/Cu Alloy in HVAC/Heat Exchanger

  • Premium quality flux cored low temperature Zinc/Aluminum 20″-long brazing rods Zn78-Al22, Zn98-Al2 and Zn92-Al8 series for joining Al-Al and Al-Cu alloy in HVAC, heat exchanger and refrigeration repairs..
  • Flux core means no manual flux application required. Non corrosive flux and ensures good oxidation protection and capillary fill. Ideal for joining aluminum alloys of the 1000, 3000, and 6000 series as well as aluminum to copper welding..
  • Good replacement to equivalent products such as Lucas Milhaupt AL822/AL802 and Harris Aluxcor Zinc-Aluminum brazing filler metals, etc..
  • Brazing rod dimension: 20-in (500mm) length and .078″ (2.0mm) diameter.
  • brazing temperatures as shown in spec. table in picture. Available packages: 4-pcs, 1/2-lb and 1-lb..
  • U.S. based welding supplier. Strong technical support with experienced customer service to address buyer’s any question..
Check Stock

SÜA - RBCuZn-C - Low-Fuming Bronze Brazing Rod - Flux Coated - 18 x 1/16 - 1/2 Lb - 24 Rods

  • LFBF (Fluxcoated low fuming bronze) is a general purpose oxyacetylene/brazing rod used for joining various ferrous and non-ferrous metals such as....
  • A “must have” filler metal for every machine shop, LFBF is excellent for building up wearing surfaces or large areas where successive layers must....
  • READ THIS: Main image is for reference only. Please check Picture #2 for an approximate quantity of rods per pound***.
  • Available in different sizes: 1/16", 3/32"and 1/8". Rod Length: 18" for easier maneuverability while welding since flux coated rods cannot be bend.....
  • Available in different package weights: 1/2 Lb, 1 Lb, 2 Lb and 5 Lb - Choose rod diameter and package quantity from the menu..
Check Stock

WORTHINGTON CYLINDER 332585 14.1 oz Pre-Filled MAP-Pro Gas Torch Style Cylinder

  • Welding Gas to Your Door - Get PrimeWeld's industrial grade 75 %Argon 25% CO2 gas cylinder delivered right to your door. We offer different mixtures for any application, and you can purchase a tank without worrying about costly rental fees or wasted trips out to your local welding supply shop..
  • The Specs - Our 125CF Argon CO2 welding gas tank arrives full and ready to go. Unlike competitors, our cylinders come fully certified, DOT 3AA, and 10-year date stamped. You'll never have to worry about your tank being turned away for a refill..
  • Best Gas for MIG - Our blend of Argon CO2 is the perfect all-purpose MIG welding gas. It's a cost-effective option that can be used to weld most metals, including mild steel and nonferrous metals, ensuring a desirable combination of arc stability, puddle control, and reduced spatter..
  • No Costly Fees - In the long run, our welding tank is low cost to own compared to the high leasing fees you'll find at your local welding supply. No deposits to put down, and you won't be locked in to the same store for refills..
  • PrimeWeld's Promise - If for any reason you're not satisfied with your Argon CO2 welding gas tank, simply reach out to Customer Support and we'll make things right for you!.
Check Stock

HITBOX 50A Plasma Cutter Welder Combo - 4 in 1 110V/220V 200A HF Pulse TIG Welder - Stick ARC MMA Welder High Frequency Multifunction Cutting Welding Machine with Foot Pedal (CT520)

  • 【4-in-1 Plasma cutter/welder combo】110v/220v 10-50Amp High Frequency plasma cutter max ideal cut thickness: 1/2".
  • 200amp TIG Pulse Welding Equipment allows welding thinner metals and high heat conductive metals without burning through. 200amp stick/mma/arc electrode welder Efficiency: 80%. Real current extending the weld cable to 168 ft does not attenuate the current.
  • 【Foot pedal remote control】Synergic Control,Automatic change of the voltage by adjusting the amperage.Comes with foot remote control / proximity control with MMA, TIG welder can improve welding efficiency, reduce the hassle in pedal control current, and guarantee quality (suitable for cutting and welder). The current fast heating (hot boot), slowly down, is good for the formation of the welding pattern.
  • 【Versatile welding, cutting machine】Cuts many metals including stainless steel, aluminum, titanium, cobalt, nickel alloys and cast iron. Includes soft-switching technology and full-bridge design for a longer life and stable arcs at low temperatures.
  • 【IGBT inverter & 2T 4T Function】: Hitbox CT520 inve....
Check Stock

HITBOX TIG Welder Pulse 200Amp 2 in 1 110V/220V Dual Voltage TIG/ARC Welding Machine With 13 Feet Digital TIG Torch Inverter IGBT Stick MMA Welder HBT2000P

  • TIG PULSE FUNCTION - With tig pulse function, welding current will constantly changes from a high (peak) amperage down to a low (basic or background) current and back again automatically. This allows for welding thinner metals and high heat conductive metals without burning through. On thicker metals you can achieve tighter narrower more penetrating welds.
  • ARC FUNCTION - Can weld 4.0mm rods for a long time. This welder comes with arc force, anti stick function. Easy to strike an arc, little spatter, stable current, and good performance.
  • 4M DIGITAL TIG TORCH - There were four button on the tig torch. The function of them is switch on/ off HF, higher current, lower current and test gas. With this 4m long tig torch, you can do a far distance welding job. Please Note: Tungsten is not included..
  • ABOUT CURRENT - Please kindly note that different different function and voltage will have different mac current. For tig welding, the max amp on 110V is 120A, on 220V is 200A, for arc welding, the max amp on 110V is 90A, on 220V is 170A.
  • 1 YEAR WARRANTY AND GREAT AFTER SELL SERVICE- HITBOX welder offers good warranty. If the machine can not work have other problem when working, please contact us at the first time, we can help you to fix it and we have agent in the U....
Check Stock

PrimeWeld 75% Argon 25% CO2 Bottle 125CF | DOT 3AA | USA CGA 580 Valve | Best Gas Blend for MIG Welding | Cylinders Full & Ready to Use

  • Welding Gas to Your Door - Get PrimeWeld's industrial grade 75 %Argon 25% CO2 gas cylinder delivered right to your door. We offer different mixtures for any application, and you can purchase a tank without worrying about costly rental fees or wasted trips out to your local welding supply shop..
  • The Specs - Our 125CF Argon CO2 welding gas tank arrives full and ready to go. Unlike competitors, our cylinders come fully certified, DOT 3AA, and 10-year date stamped. You'll never have to worry about your tank being turned away for a refill..
  • Best Gas for MIG - Our blend of Argon CO2 is the perfect all-purpose MIG welding gas. It's a cost-effective option that can be used to weld most metals, including mild steel and nonferrous metals, ensuring a desirable combination of arc stability, puddle control, and reduced spatter..
  • No Costly Fees - In the long run, our welding tank is low cost to own compared to the high leasing fees you'll find at your local welding supply. No deposits to put down, and you won't be locked in to the same store for refills..
  • PrimeWeld's Promise - If for any reason you're not satisfied with your Argon CO2 welding gas tank, simply reach out to Customer Support and we'll make things right for you!.
Check Stock

bestarc TIG Welding Tungsten Electrode 2% Thoriated 3/32' x 7' (3/32'', Red)

  • 2% Thoriated Tungsten Electrodes for TIG Welding (Red WT20).
  • Good effect of welding stainless steel, adequate for DC welding.
  • Wide application range, suitable for welding stainless steel / carbon steel / copper / iron / nickel and other metals.
  • Longer storage time, sealed vacuum packaging to avoid oxidation.
Check Stock

Handy Flux, 7 Ounce Jar with Brush

  • Function: Soldering electronic components. Anti-oxidation flux. Better welding fluidity. Easy to tin, easy to solder, strong welding..
  • Feature: Non-toxic, no corrosion, high intensity joint, good immersion, good insulation, good soldering properties, smooth welding surface..
  • Application: Soldering flux is suitable for welding on instruments, meters, gold, copper, iron, tin and other metals. Widely used in phone PCB, SMD, SMT patch and appliance repair..
Check Stock

Titan Fitness Competition Style Kettlebell 16 KG

  • FUNCTIONAL STRENGTH TRAINING: Kettlebell training involves every day, such as lifting heavy bags, pulling open doors, and reaching things that are up....
  • NO FILLER OR WELDING: Each Kettlebell is individually cast as one solid piece instead of welding parts together. The mold has a hollow core cast to....
  • COLOR CODED WEIGHTS: The Competition Style Kettlebell comes in a variety of color-coded weight increments from 8 KG to 40 KG, with little fluctuation....
  • DURABLE CONSTRUCTION: The Kettlebell is cast from heavy-duty steel with non-welded handles, no filler, or rattle to help improve overall strength and....
  • DIMENSIONS: The kettlebells are uniform in 8.3-in diameter, 11.4-inch height, and a 35 mm handle thickness, allowing you to train the same movement....
Check Stock

Titan Fitness Competition Style Kettlebell 10 KG

  • FUNCTIONAL STRENGTH TRAINING: Kettlebell training involves every day, such as lifting heavy bags, pulling open doors, and reaching things that are up....
  • NO FILLER OR WELDING: Each Kettlebell is individually cast as one solid piece instead of welding parts together. The mold has a hollow core cast to....
  • COLOR CODED WEIGHTS: The Competition Style Kettlebell comes in a variety of color-coded weight increments from 8 KG to 40 KG, with little fluctuation....
  • DURABLE CONSTRUCTION: The Kettlebell is cast from heavy-duty steel with non-welded handles, no filler, or rattle to help improve overall strength and....
  • DIMENSIONS: The kettlebells are uniform in 8.3-in diameter, 11.4-inch height, and a 35 mm handle thickness, allowing you to train the same movement....
Check Stock

Titan Fitness Competition Style Kettlebell 12 KG

  • FUNCTIONAL STRENGTH TRAINING: Kettlebell training involves every day, such as lifting heavy bags, pulling open doors, and reaching things that are up....
  • NO FILLER OR WELDING: Each Kettlebell is individually cast as one solid piece instead of welding parts together. The mold has a hollow core cast to....
  • COLOR CODED WEIGHTS: The Competition Style Kettlebell comes in a variety of color-coded weight increments from 8 KG to 40 KG, with little fluctuation....
  • DURABLE CONSTRUCTION: The Kettlebell is cast from heavy-duty steel with non-welded handles, no filler, or rattle to help improve overall strength and....
  • DIMENSIONS: The kettlebells are uniform in 8.3-in diameter, 11.4-inch height, and a 35 mm handle thickness, allowing you to train the same movement....
Check Stock