Reviews Welding Electrodes E6013

E6013 3/32\ 5/32\ 1/8\ Stick electrodes welding rod 10 lb 50 lb … (1/8\ 10 lb)

  • E6013 3/32" 5/32" 1/8" Stick electrodes welding rod 10 lb 50 lb.
Check Stock

Mini Welding Machine 110V Plug, 250A Stick MMA Welder Machine IGBT Digital Smart VRD Hot Start with Wire、Tongs, Ground Wire, Clip, Mask and Gloves.fits Below 3.2mm Welding rods

  • Mini Welding Machine capable of welding mild steel, carbon steel, stainless steel and cast iron.can handle E6010 cellulose electrode, is ideal for AWS E6010 E6011 E7018 E6013 of 1/16"-1/8"(1.6mm-3.2mm), and E40 series electrodes。.
  • The Miuezuth MINI arc welding kit has multiple protection mechanisms to improve the safety factor, the insulation protection level is "F", and the enclosure protection level is "IP21", which can ensure your safe use. With overheating and overcurrent automatic protection. This small welder is very easy to use, even a novice can use it..
  • The Miuezuth welding machine adopts the most advanced IGBT technology, the efficiency reaches 85%, and the power factor is 0.93. The miniature welding equipment reduces the loss of copper and iron, which is very energy-saving, the energy optimization effect is remarkable, and the welding efficiency is significantly improved..
  • The Miuezuth ARC Portable Welder features an easy-to-carry carrying strap, compact and lightweight body, and a colorful hard carton packaging for easy storage and portability. Whether you work indoors or out, this welding machine is your go-to welding tool..
  • Every Miuezuth IGBT rod stick welder machine is inspected before leaving the factory to ensure that it meets the hig....
Check Stock

Tungsten Electrodes for Tig Welding 2% Grey Ceriated Tungsten Assorted- 5PCS 3/32 + 5PCS 1/16

  • Premium 10PK tig welding tungsten electrodes 2% ceriated gray WC20/EWCe-2, 5PCS 1/16" & 5pk 3/32" ceriated tungsten electrodes for tig welding.
  • The ceriated tungsten tig electrode is with high performance: No spitting,stable consistent arc starts and good stability with low burn-off rate..
  • The 2% ceriated tungsten electrode perform reliably and consistently even in high current range on AC&DC applications for welding copper alloys, nickel alloys, titanium alloys,low-alloyed steels,magnesium alloys and aluminum alloys.
  • The tungsten electrodes adhere to American Welding Society AWS standards,great for beginner to professional tig welder for tig welding works.
  • Package including: 5PCS 1/16" & 5PCS 3/32" by 7"length 2% grey ceriated tungsten, Tungsten Electrode Size: 3/32" x 7"(2.4mm x 175mm )AND 1/16" x 7"(1.6mm x 175mm).Warm tips:We'll send the tungsten electrodes with old and new package at random. We guarantee with the same high quality.
Check Stock

3mirrors ALUMINUM Tungsten Electrode Sharpener Grinder Head TIG Welding Tool with Cut-Off Slot Multi-Angle & Offsets, 5X 25mm Double Diamond Wheels, 1X Connecting Rod

  • Premium 10PK purple rare earth blend (EWG) tig welding tungsten electrodes , 5pk 1/16" & 5pk 3/32" purple tungsten electrodes for tig welding.
  • The purple tungsten tig electrode is with great welding performance: non radioactive, reliable arc-striking, low burn-off rate and good stability with low burn-off rate..
  • The rare earth blend tungsten electrode perform reliably and consistently even in high current range on AC&DC applications for welding copper alloys, nickel alloys, titanium alloys,low-alloyed steels,magnesium alloys and aluminum alloys.
  • The tungsten electrodes adhere to American Welding Society AWS standards,great for beginner to professional tig welder for tig welding works.
  • Package including: 5PCS 1/16" & 5PCS 3/32" by 7"length rare earth blend (EWG) tungsten, Tungsten Electrode Size: 3/32" x 7"(2.4mm x 175mm )AND 1/16" x 7"(1.6mm x 175mm).Warm tips:We'll send the tungsten electrodes with old and new package at random. We guarantee with the same high quality.
Check Stock

Midwest Tungsten Service TIG Welding Tungsten Electrodes 10-Pack Blue - 2% Lanthanated Tungsten WL20/EWLa-2 3/32

  • PREMIUM ten (10) pack of 3/32" tungsten electrodes for TIG welding for the beginner, intermediate, and professional TIG welder. From students to industrial and artistic users, these fit your use.
  • HIGHEST RATED and most reviewed 2% Lanthanated Tungsten TIG electrodes on Amazon ready to help you make the perfect weld. Noted for their reliability and consistent performance..
  • EXCEPTIONAL for both AC & DC applications and for welding aluminum alloys, magnesium alloys, nickel alloys, copper alloys, titanium alloys, low-alloyed steels, and non-corroding steels.
  • UNITED STATES based manufacturing & knowledgeable customer service staff are here to help you pick the perfect TIG tungsten for your welding job, large or small..
  • FREE materials safety data sheet (MSDS) and certificate of conformance linked below, the tungsten electrodes adhere to American Welding Society standard A5.12M/A5.12:2036.
Check Stock

Baluue TIG Welding Tungsten Electrodes Ground Finish Welding Rods Thoriated Electrodes for WP

  • lanthanated tungsten rods Multiple choices for your high-quality welding..
  • lanthanated electrode Pure Tungsten forms a clean, balled tip when heated and provide great arc stability for AC welding with a balanced wave..
  • Welding Tungsten Electrode Rod Good mechanical cutting performance, good electrical conductivity, easy operation and long service life..
  • tig tungsten Smallest electron emission, low steam pressure, low resistance and good electrical conductivity..
  • ground annealed Tungsten electrodes Pure tungsten welding electrodes also provide good arc stability for AC sine wave welding, especially on aluminum and magnesium..
Check Stock

WeldingCity 5-Lb Stick Welding Electrode Rods E6013 1/8\ (3.2mm) Carbon Steel | Pack of 5-lb

  • PRODUCT: premium shielded manual metal arc-welding (SMAW) electrode E6013 for stick welding carbon steel welding in metal fabrication, maintenance and repair works..
  • SPECIFICATION: AWS A5.1 ASME SFA 5.1/E6013. 60,000 psi min. yield strength. Core rod diameters and electrode lengths: 1/8" x 14" and 3/32" x 12". Typical deposited chemical composition (wt%): C=0.08, Mn=0.50, Si=0.40, P=0.015, S=0.012, Fe-balance..
  • FEATURES AND APPLICATIONS: Runs on AC or DCEP (reverse) polarity or DCEN (straight) polarity. Light to medium penetrating. Easy steady arc with excellent wetting and ease of operation. Smooth and flat beads with low spatter. Easy slag removal. For sheet metal, irregular short welds that change positions. Good for general, all-purpose applications and joints with poor fit-up. All-position welding..
  • PACKAGE: pack of 5-lb and 10-lb. With volume discount. Buy More Save More!.
  • U.S. based welding supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

E6013 - General Purpose/Mild Steel - Welding Electrode/Rod - 14" x 1/8" (PACK: 44 LB)

  • All-position, mild steel electrode for welding light to medium-gauge steel. Common uses include tack welding on thin sheet metal such as galvanized sheets, automobile bodies, metal furniture, window frames, fences, storage tanks, farm equipment and iron grills.
  • Excellent operating characteristics when using small diameter electrodes to weld thin sheet metal using lower open-circuit AC voltage.
  • One of the easiest electrodes to use because of its easy slag control in vertical down welding, its wide operating range and restrike capabilities.
  • This electrode has a soft, steady and quiet arc that produces very little smoke or spatter.
  • Select your Electrode Diameter and Package Quantity from the Options - Check Picture #3 for Welding Parameters..
Check Stock

HUGEWELD Tig Welder TIG-200,HF TIG/Stick/Arc 2 in 1 TIG Welders,200 Amp 220V TIG Welding Machine,IGBT Inverter Portable Digital Display for Beginner

  • ✅【2 in 1 HF START】TIG200 is high frequency(HF) ignition, stable arc,simple to operate. The conversion efficiency of the whole machine is increased by more than 30%..
  • ✅【IGBT INVERTER】Use the single tube IGBT (the inverter frequency can reach 25-50KHz) to convert 50/60Hz to dc and then to high frequency and lower voltage,portable only 12.54 lbs, 13x6.3x11.4" size !.
  • ✅【2T & 4T 】2T(Manual) / 4T(Semi-auto) switch is available, you can release your finger for long time welding job when on 4T. 2T is suitable for the re-tack welding, transient welding or thin plate welding. 4T is suitable for welding medium thickness plates..
  • ✅【SAFETY and ENERGY SAVING】Automatic Compensation with Voltage Fluctuation, Over-voltage protection, Under Voltage Protection, Over Current Protection, Over Load Protection,Fan dormancy..
  • ✅【EXCELLENT WELDING PERFORMANCE】 Tig welding thickness 0.5-5.0mm under 10-200A output.
  • application of tungsten electrodes diameter: 1.0/1.6/2.0/2.4/3.0mm. Suitable for welding different metals such as steel, stainless steel, carbon steel etc. (Can’t weld aluminum). ARC welding thickness 2.0-8.0mm under 20-150A current , application of electrodes diameter: 2.5/3.2mm..
Check Stock

VEVOR TIG Welder 3 in 1, 110V High Frequency TIG/Stick/Clean Welding Machine w/IGBT Inverter, 155Amp Digital Arc Welder

  • High-performing 3-in-1 TIG Welder: Our welder machine has HF TIG, ARC, and a clean mode. It also comes with a TIG torch. The arc success rate of the TIG is 100%. The TIG and hand MMA welding provide an easy arc start, stable current, minimum spatter, and good shaping. Get clean and beautiful welding easily by using clean mode after welding..
  • Safety First & Overheat Protection: The unique air channel design increases the heat dissipation of the power device and control circuits. It also extends the welding time drastically. The IGBT inverter will greatly improve the performance and reliability of the 3 in 1 welder. The outstanding 60% duty cycle can also ensure long-time welding. What are you waiting for? Get ready to feel the difference!.
  • Easy-to-use Panels and Functions: The setup is marked clearly by a name and graphic representation of each knob’s function. The 2T/4T switch is available to add convenience. A gas shield set makes your welds pristine. It is simple to operate for both beginners and skilled welders..
  • Suitable Welding Thickness: Delivers a 155A current output, making the welder machine suitable for welding stainless steel, iron, mild steel, copper, and nickel. (The maximum welding thickness is 0.1″/3 mm.). Whether you are a hobbyist, ....
Check Stock

MARSWARE TIG Welding Tungsten Electrode Rod 2% Thoriated 3/32''×7'' (Red, WT20) 10-pack Ground Finish Arc Starts Easier and More Stable

  • 【Premium Quality Tungsten Electrodes】：The tig welding tungsten electrodes rod is perfect for tig welding. Durable. Good conductivity. Arc starts easier and more stable. Hardness ensured..
  • 【High temperature-resistant, Non-melting】：2% Thoriated. Annealed brittled for easier sizing. Melting point can reach 3,410 degrees Celsius. Conform to ANSI/AWS A5.12M/A5.12:2009 ISO 6848:2004 MOD..
  • 【A Wide Range of Suitable Base Metal Type】：Good for Stainless steel, carbon steel, nickel titanium, copper and its alloys, etc..
  • 【Upgraded Vacuum Package】：10 pcs 3/32''(2.4mm)×7''(175mm) ground finish tungsten electrodes. Anti-oxidation vacuum packaging. Ensure product quality and longer preservation time..
  • 【Worry-free Purchase】: Selling directly from MARSWARE factory. Returnable within 30 days of receipt of shipment. Experienced and professional customer service team to help you solve any issue..
Check Stock

HONE Stick Welder 110V/220V Actual 140Amp ARC Welder Machine IGBT Inverter Digital Display LCD Welding Machines with Hot Start Arc Force Anti-Stick High Efficiency for 1/16 -1/8 Welding Rod.

  • ➠【Digital IGBT Inverter Technology】This ARC welder come with advaced unique IGBT control mode improves the reliability of welding machine. Powerful Arc-force provide smoother welding and deeper penetration, keep arc stability, consitant welding current, the pretty nice beads, specially when in small welding current..
  • ➠【Suitable for Series Welding Rod】The welder has amazing hot-start, is ideal for the rods AWS E6013 E7018 E6011 of 1/16"-1/8"(1.6mm-3.2mm), you just take the rod touching the workpiece, arc striking immediately, also can handle E6010 cellulose electrode, capable of welding mild steel, carbon steel, stainless steel and cast iron..
  • ➠【Safe and Stable】This welding machine has Anti-stick function easy the electrode removal from the workpiece, and closed-loop feedback control and multiple protection functions set internally, to prevent over heat, over current, over-voltage, under-voltage and short circuit damage to make sure safely operation..
  • ➠【Easy to Operate】The soldadora inverter 110V 220V equiped with digital display and trouble indicate, the real welding current be shown, is so easy to use that it can be used by novice or master welder. No matter is man or woman welders..
  • ➠【Portable and Support】HONE welder with ....
Check Stock

bestarc TIG Welding Tungsten Electrode 2% Thoriated 3/32' x 7' (3/32'', Red)

  • 2% Thoriated Tungsten Electrodes for TIG Welding (Red WT20).
  • Good effect of welding stainless steel, adequate for DC welding.
  • Wide application range, suitable for welding stainless steel / carbon steel / copper / iron / nickel and other metals.
  • Longer storage time, sealed vacuum packaging to avoid oxidation.
Check Stock