Reviews Welding Earth Clamp

Jacazooy Welding Electrode Holder 4.9ft Stick Copper Plier Ground Clamp MMA Mini Welding Rod Copper Clamp Tool Accessories With Cable

  • ✔️The goods are mixed in black and white and shipped randomly. Please don’t take the order if you mindThe Welding Electrode Holder is made of all copper clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use..
  • ✔️The Welding Ground Clamp is suitable for a welding arc.Features wide grip jaws to ensure a firm connection.Grounds work to be welded to a good electrical ground earth..
  • ✔️ This welding accessories is made of copper clamp head, strong current.It is not easy to scald with pure copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion..
  • ✔️The welding accessories have a common advantage: Copper guide, pure copper wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force..
  • ✔️ The Welding Electrode Holder with cable is 6.5ft long and the Welding Ground Clamp with cable is 4.9ft long. Please allow the manual measurement data to deviate slightly. (0.1-0.2ft error).
Check Stock

300A 16㎡ Copper Clad Aluminum Cable Dinse 10-25 Connector Plug Welding Leads Assembly Set 9.8ft Welding Electrode Holder and 6.5ft Stick Plier Ground Clamp for ARC Stick MMA Mini Welding Rod Welder

  • ✨ This kind of Welding Electrode Holder is made of Copper Clad Aluminum clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use.
  • ✨ The Welding Ground Clamp is also suitable for stick,tig,mig or cut welding.Features wide grip jaws to ensure a firm connection.Grounds work can be welded to a good electrical ground earth.
  • ✨ 9.8ft long Welding Electrode Holder with cable and 6.5ft long Welding Ground Clamp with cable. 16㎡cable,Dinse 10-25 connector.*-*Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits*-*.
  • ✨ This Welding Leads Assembly Set has a strong current(300A).It is not easy to scald with copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion.You will receive a ready to use fully assembled lead, no tools required.
  • ✨ This set of welding accessories have a common advantage: Copper guide, Copper Clad Aluminum wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force.
Check Stock

QWORK 260/300/500A Ground Welding Earth Clamp, Brass A-shape Welding Ground Clamp Cable Copper Grip for Welding Machine ( 260A )

  • Brass: QWORK Ground Welding Earth Clamp is made of high-quality brass, excellent conductivity, oxidation resistance and long service life..
  • Wear-resistant: The A-type clip is not easy to fall off, it is safe and reliable to use, electroplated, and wear-resistant..
  • Various types of welding: Suitable for argon arc welding, submerged arc welding, resistance welding, stud welding and other welding equipment..
  • Easy to operate: Simple structure, convenient operation, stable performance, high reliability, it is a perfect substitute for manual welding machine..
  • Wide range of uses: Widely used in shipyards, machinery manufacturing, petroleum exploration, automobile manufacturing and other industries..
Check Stock

A Dark Heart (Elders and Welders Chronicles Book 2)

  • ️【★TIG&ARC Strong Point】High Frequency Start TIG,Non-Contact Arc Initiation That Reduces Tungsten And Material Consumption.Rated Input Frequency 50/60Hz, Duty Cycle 85%，Improves The Performance Of The Welding Machine..
  • ️【★Feature】TIG/ARC 2-in-1,Tig& ARC Welder With Tig Torch, Earth Clamp, Electrode Holder,Welding Tong.
  • ️【★Portable And Powerful】TIG Welding Thickness 0.3-4.8mm,Stainless Steel, Alloy Steel, Mild Steel, Copper, Cast Iron And Chrome.ARC Welding Thickness 15-42mm.
  • ️【★Energy Saving】Portable Handle Makes It Easier To Operate, The Lightweight Makes It More Convenient To Carry.Suitable For Stainless Steel, Alloy Steel, Carbon Steel, Copper, Copper Alloy And Other Non-ferrous Metal Welding.
  • ️Automatic Compensation For Voltage Fluctuation, Over-voltage Protection, Under Voltage Protection, Over Current Protection, Over Load Protection.
Check Stock

Mig Welder Machine Inverter Gas Gasless RBM1500 Mig Stick Tig 4 in 1 Flux Core 220V Supports 2LB Wire Automatic Feed for Beginner

  • [Multiprocess MIG Welding] gasless(flux core wire) and gas(solid wire) welding :supports 2lbs .030’’ or .040’’ wire to weld over .030’’ thickness carbon steel stainless steel/mild steel..
  • [Stick Welding] switch to “MMA” on the panel and adjust the current as needed,welding well with 3.2mm rod 7018 1/8″, 6013 and 7018 3/32″as well.
  • [Generator Supported] this welder works well with a generator,but we suggest a 5000W above generator【30A breaker suggested for 220V】.
  • [Warranty] buy this welder with confidence as Reboot offers 1-year limited warranty and free consumables guarantee,besides,you will get a local supports for any assistance.Click on the add to cart button now!.
  • Packing List : 1X dual Mig150,1X earth clamp,1X electrode holder,1X welding torch,1X 2lbs flux cored wire,1X welding hose.
Check Stock

Magnetic V-Pads Kit,Strong Hand Tools,Magnetic Welding Clamps,Adjustable V Type Welding Clamps,Pipe Magnets,Magnets On Both Pad Face & Bottom Pull Force 12 lbs 4 Pack

  • Strong Hand Tools, Magnetic V-Pads Kit,Magnetic Tack Welding Tool,Welding accessories and tools,Magnets on both pad face and the bottom,Each v-pad....
  • Adjustable welding magnet, Magnetic welding holder, hold and position round, flat, and square parts in light duty substructure applications! Time....
  • Perfect spot welding clamp: Hold tabs, gussets, plates and odd shaped pieces in position for tack welding.Widely applied: Widely used on doors, tool....
  • 4 Pack strong hand magnet(XDV4: 2"),Pull Force 12 lbs. Our V-type magnetic welding clamps are made of high quality stainless steel, sturdy and....
  • Heat Warning: Avoid Pronlonged exposure to high heat. Rare-earth Magnets may demagnetize with temp. exceeding 185°F. Feel free to contact us by....
Check Stock

110V Welding Machine, IGBT Portable MMA Welder Machine Gun, 6 Variable Current Handheld Welding Machine for 1/16”-1/8” size Arc Welding Rods

  • The welding machine with IGBT inverter technology not only increases efficiency, but also reduces the weight and size of the arc welder..
  • MMA welding machine, perfect appearance, high quality internal structure, small body, light weight, energy efficient, easy to carry and use, whether you are working outdoors or indoors..
  • Multi-purpose MMA welder is versatile and suitable for repair, metal fabrication, outdoor repair, truss. Suitable for welding alloy steel, carbon steel, copper and other non-ferrous metals..
  • ARC welder fits all 1/16”-1/8” size welding rod.
  • Kit includes: 1*ARC welder, 1* Earth Clamp, 1× brush, 1*user’s manual and 1*tool pouch.
Check Stock

TRRAPLE Magnetic Welding Clamps, Adjustable V-Type Fixture Clamp, 2/4 Pcs Durable Stainless Steel Tab Holder Corner Butt Welding Panel Clamps Tools

  • HIGH QUALITY WELDING CLAMPS -- Our v-type magnetic welding clamps are made of made of high quality stainless steel, sturdy and durable, can be used for a long time..
  • MAGNETIC HOLDERS -- One rare earth magnets in each pad provide secure gripping power for rapid, and convenient, holding and positioning..
  • EASY TO USE -- Pads pivot to hold onto round, square, or flat metal surfaces, easy to install and apply..
  • PERFECT SPOT WELDING CLAMP -- Hold tabs, gussets, plates and odd shaped pieces in position for tack welding..
  • WIDELY APPLIED -- Widely used on doors, tool boxes, windows, wooden case, furniture and so on..
Check Stock

Goflas 160A MIG Welder, 110/220V Flux Core Welder MIG/Lift TIG/Stick 3 in 1 Welding Machine with IGBT Inverter Gasless Welder with Welding Gun, Electrode Holder, Earth Clamp and 2lb Welding Wire

  • 【Multifunctions】3 in 1 Welder Machine Suitable for Gasless Flux Wire MIG Welder, Stick Welder and Lift TIG Welder. (Need to buy extra Lift tig torch).
  • 【IGBT inverter technology】160A Welding Machine adopts advanced IGBT inverter technology, which improves the reliability of the welder. Powerful arc force makes welding more stable, efficient, convenient, deeper penetration, constant welding current to keep the arc stable, especially in low current welding..
  • 【Gasless Flux-cored Welding Machine】160A Flux core Welder is a versatile flux core arc welder, specifically designed to use self-shielding flux-cored welding wire.This eliminates the need for gas and regulators that normal MIG welders require..
  • 【Synergic Control】Through a knob to adjust the welding current, other welding parameters (wire feeding speed, welding voltage, inductance value, etc.) automatically matched with it. It has the feature of easy adjustment. It is suitable for both professional welders and novices..
  • 【Package includes】: 1* 160A MIG Welder, 1* MIG Torch, 1*Electrode Clamp, 1* Earth Holder, 1* .030"/2lb Flux Cored Wire, 1* 0.8MM/.030" Contact Tips, 1* 0.9MM/.035" Contact Tips, 1* Brush&Hammer, 1* User Manual..
Check Stock

Plasma Cutter Welder Combo Pulse TIG Welder Stick Welder 3 in 1 Welding Machine, 50A Plasma Cutting, 200A TIG Welding (Pulse), Arc/MMA Welder More Stable Arc Dual Voltage 110V/220V 520TSCPF

  • ✅【Plasma Cutter】10-50Amp DC current output. The cutting machine offers a variety of welding and cutting abilities.
  • Compact plasma cutter has a Handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum..
  • ✅【 Pulse TIG Welder】10-200AMP DC TIG electric current output.
  • The newly added PULSE function makes the welding shape more beautiful and improvers tungsten life. Quality TIG welding on stainless or steel and precise welding of thinner-gauge materials. Easy work with foot-pedal (it is not included in standard accessories). Please make tungsten head sharp before using TIG welder, can get better welding in this way..
  • ✅【STICK/MMA/ARC Welder】Output current 10-180Amps, Hot arc starting, Anti-Stick, Deep welding pool and nice welding surface and few spark. Suitable for welding different acid and basic welding rod size from #1.6mm to #4.0mm..
  • ✅【Multiple Uses 】The welding machine suitable for weld stainless steel, alloy steel, carbon steel and nonferrous metals.
  • ideal for a welding enthusiast or hobbyist with....
Check Stock

COMPLETE ALUMINIUM WELDING GUIDE: Complete beginners guide on aluminium welding, tips, benefits of aluminium and tips for mig welding

  • 【2 IN 1 MACHINE】MIG160 is MIG and MMA 2 function- 2 in 1 modes what you need. Welding Machine can be plugged into 110V / 220V dual voltage. The application of IGBT technology has significantly enhanced the welding machine's reliability and turned them into a lighter and compact version ..
  • 【OVERLOAD SAFETY PROTECTION】 - FORTON MIG160 welder come with a safety feature where the welder is automatically turned off when it it too hot or the volt or current exceed their range. This function will keep you and your welder safe. Internal fan-cooling system,there is a fan helping to air cooling the welder when working..
  • 【EASY TO CONTROL WELDING】 -This MIG160 welding machine is an amazing portable welding unit. The adjustments are simple, the sound is smooth and the welds are outstanding quality. Automatic settings are pretty accurate. The welding machine case is metal and sturdy. 100% satisfied with the fast wire feed rate way wether it welds thick or thin matel. Less splash, simple usage and great welding seam..
  • 【WIDE APPLICATIONS】This machine is super portable and light. In addition, the machine is with powerful functions and suitable for wide occasions. It can be used for hardware welding materials, home DIY, industrial installation, autom....
Check Stock

NewPosition MIG/MAG/MMA 3-in-1 Welder, 160A Stick ARC Welding Machine, Flux Core Welder, Gas/Gasless IGBT Inverter,110V

  • ...es an advanced IGBT inverter design. It has the following advantages: stable wire speed, high no-load voltage, with good compensation of arc force, easy arc starting, less spatter, stable current, and no electromagnetic noise. This machine has both voltage adjustment and current adjustment, which can provide better welding performance to the workpiece..
  • 【MULTIFUNCTIONAL】This powerful welder has three functions of MIG welding, MAG welding and MMA welding. You can use it with CO2 gas, mixed gas or without gas. It’s suitable for welding sheet of low-carbon steel, alloyed steel and stainless steel..
  • 【WELDING WIRE & ELECTRODE】This machine uses 2Lbs solid wire(0.030’’), 2Lbs flux cored wire(0.030’’), or basic electrodes with a diameter of 3/32’’-1/8’’..
  • 【PORTABLE DESIGN】This welder features an easy carrying handle, compact design, easy for translation and storage. It’s suitable for moving jobs and working at height. It’s quite small, easily carried to any Do-It-Yourself, Maintenance, Repair, Metal Fabrication and Hobbyist project..
  • 【COMPLETE PACKAGE】This model is supplied with full accessories with MIG torch, electrode holder with cable, earth clamp with cable, brush and mask. Ready to use! Note: The diameter of the contac....
Check Stock

FOITECHY 4 Pcs Magnetic Welding Clamps,Adjustable V Type Welding Clamps,Adjustable V-Type Fixture,Magnetic V Pads Kit, Magnetic V-sharp Tab Holder Corner for Tack Welding

  • 1.djustable V-Type Fixture Clamp: Magnetic welding clamps provide secure gripping power for rapid,hold and position round, flat, and square parts in light duty substructure applications.
  • 2.4 Pack strong hand magnet(XDV4: 2"),Pull Force 12 lbs. Our V-type magnetic welding clamps are made of high quality stainless steel, sturdy and durable, can be used for a long time.
  • 3.The V-type magnetic welding clamps are suitable for holding tabs, gussets, plates and odd shaped pieces in position for tack welding. They are widely used in doors, tool boxes, windows, wooden boxes, furniture, and other equipment..
  • 4.Heat Warning: Avoid Pronlonged exposure to high heat. Rare-earth Magnets may demagnetize with temp. exceeding 185°F.
Check Stock