Reviews Welding Cable Twist Lock Connector

ABN L5-50R Connector – 50 Amp Twist Lock Inlet Locking Power Cord Connector Locking Power Inlet Plug 50A 125/250V

  • CONNECT YOUR CABLE: Use your generator, transfer switch, welding equipment, trailer, RV camper power inlet with this ABN Inlet Locking Connector.
  • KEEP OUT PESTS: Replace your power cord with this twist lock connector so the cord can be removed and stored without leaving an opening that mice or....
  • SECURELY HOLD CABLE: This connector comes with strain reliefs that mount inside the base of the connector to hold the cable (clamp for the cord).
  • PERFECT SIZE: Approximate measurement across the face is 2 inches (5.1cm).
  • Across the back where the cord enters adds 0.25 inch (2.25 inches / 5.7cm....
  • Remove housing by loosening face screws and slide over cable (If a weather-resistant boot is used, slide this over....
Check Stock

Stick Electrode, 1/8 in. dia., 10 lb.

  • 200 AMP Electrode Holder – The comfortable, lightweight electrode holder is rated for 200 amps of current at a 20% duty cycle..
  • 12.5 FT Cable Length - The assembly features a flexible copper welding cable which is 12.5 FT in length..
  • Twist-Mate / Dinse Connector – The assembly features twist-mate / dinse connector is which is compatible with the Power MIG / Weld-Pak 140, Power MIG 180, Power MIG 210mp, SquareWave TIG 200 and many other Lincoln or competitor power sources..
  • TRUSTED BY PROFESSIONALS – This electrode holder assembly is used by professional fabricators on a daily basis..
  • For use with 3/32, 1/8 or 5/32 Stick (SMAW) electrodes..
Check Stock

NewFantasia HiFi Cable with 2.5mm Trrs Balanced Male Compatible with Sennheiser HD598 / HD598 SE / HD598 Cs / HD599 / HD569 / HD579 Headphones and for Astell&Kern AK240 AK380 AK320 onkyo DP-X1 FIIO

  • Length: 150cm/5.9ft/59inch, this cable is made with the OCC Wire, Silver Plated cable.
  • Connector: 2.5mm Trrs Balanced Male to 2.5mm connector with Twist-to-Lock connector deign Compatible with Sennheiser HD598, HD598 SE, HD518, HD598 Cs,....
  • The 2.5mm connector with Twist-to-Lock connector deign Compatible with Sennheiser HD598, HD598 SE, HD518, HD598 Cs, HD598 SR, HD599, HD569, HD579....
  • The 2.5mm Trrs Balanced male is compatible with Astell&Kern AK240 AK380 AK320 compatible with onkyo DP-X1 compatible with FIIO X5III XDP-300R....
Check Stock

200 Amp Welding Electrode Holder Lead Assembly - Dinse 10-25 Connector - #2 AWG cable (15 FEET)

  • Heavy Duty Welding Lead Assembly manufactured with Made in USA Flex-A-Prene highly flexible cable. Cable Size: #2 AWG - 0.418" O.D..
  • Electrode Holder compatible with AF-3. Constructed with Heavy Duty Nylon body. High conductivity jaws and cable connectors. High strength coiled spring for a maximum grip of the electrode. Holds Electrodes up to 1/4"..
  • Cable Connector Options: LC-40 (Cam-Lock), Dinse 10-25, Dinse 35-70 or Terminal Lug. ***Please select your option from the menu, check the connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits***.
  • RATED: 200 AMP @ 60% Duty Cycle. ***Please Check you welder´s maximum amperage and look for a cable assembly that matches or exceeds that amperage rating***.
  • Choose the Cable Length from the Menu. These leads are assembled to customer specifications the same day the order is received, they are packed and shipped on a cardboard box or a white USPS Flat Rate Package. You will receive a ready to use fully assembled lead, no tools required..
Check Stock

200 Amp Welding Ground Clamp Lead Assembly - Dinse 10-25 Connector - #2 AWG cable (15 FEET)

  • Heavy Duty Welding Lead Assembly manufactured with Made in USA Flex-A-Prene highly flexible cable. Cable Size: #2 AWG - 0.418" O.D..
  • Ground Clamp compatible with EG-300. Constructed in Zinc-Plated Steel. Large hex screw cable connection assures a tight and safe cable connection. It has a large contact area for an effective ground connection. Its design eliminates arc blowing and facilitates fast grounding spot changing.
  • Cable Connector Options: LC-40 (Cam-Lock), Dinse 10-25, Dinse 35-70 or Terminal Lug. ***Please select your option from the menu, check the connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits***.
  • RATED: 200 AMP @ 60% Duty Cycle. ***Please Check you welder´s maximum amperage and look for a cable assembly that matches or exceeds that amperage rating***.
  • Choose the Cable Length from the Menu. These leads are assembled to customer specifications the same day the order is received, they are packed and shipped on a cardboard box or a white USPS Flat Rate Package. You will receive a ready to use fully assembled lead, no tools required..
Check Stock

300A 16㎡ Copper Clad Aluminum Cable Dinse 10-25 Connector Plug Welding Leads Assembly Set 9.8ft Welding Electrode Holder and 6.5ft Stick Plier Ground Clamp for ARC Stick MMA Mini Welding Rod Welder

  • ✨ This kind of Welding Electrode Holder is made of Copper Clad Aluminum clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use.
  • ✨ The Welding Ground Clamp is also suitable for stick,tig,mig or cut welding.Features wide grip jaws to ensure a firm connection.Grounds work can be welded to a good electrical ground earth.
  • ✨ 9.8ft long Welding Electrode Holder with cable and 6.5ft long Welding Ground Clamp with cable. 16㎡cable,Dinse 10-25 connector.*-*Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits*-*.
  • ✨ This Welding Leads Assembly Set has a strong current(300A).It is not easy to scald with copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion.You will receive a ready to use fully assembled lead, no tools required.
  • ✨ This set of welding accessories have a common advantage: Copper guide, Copper Clad Aluminum wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force.
Check Stock

Insignia 1/4'-to-3.5mm Mini Headphone Jack Adapter - Black

  • Perfect for replacing worn out plugs for headphones or making a cable to a desired length or replacing a broken connector..
  • Easy to handle,you really don't have to be a professional to do this. Just insert the cables in the hoops, twist and lock in place, and only then solder..
  • Suitable for the cable up to 5mm, if your cable is too thin, just use some sleeve to hold it properly to avoid the movement.
  • Package include: 4 Pack connector + Some shrinkle tubing.
Check Stock

Monster Prolink Studio Pro 2000 Speaker Cable: Straight to Straight, 6 ft, Straight 1/4 Plugs

  • HIGH-POWERED PERFORMANCE: Get high-fidelity sounds and clear signal transfers from your speaker system.
  • ADVANCED SOUND TECHNOLOGY: Multi-Gauge wire networks and high-frequency windings provide accuracy, dynamic range, and audio clarity.
  • DYNAMIC AUDIO QUALITY: Uses an advanced Bass Control Conductor and Magnetic Flux Tube for incredible dynamics.
  • SELF-LOCK CONNECTOR: Features custom self-locking twist-lock connector for effortless plugging or unplugging.
  • LIFETIME CABLE WARRANTY: Covered by Monster's 100% replacement guarantee.
Check Stock

Journeyman-Pro 2613 30 Amp 125 Volt NEMA L5-30R 2P 3W Locking Female Plug Connector Black Industrial Grade Grounding 3750 Watts Generator Rating L5-30R Female Plug

  • INDUSTRIAL GRADE: NEMA L5-30R, 2 Pole, 3 Wire, Locking Plug Connector Black/Yellow.
  • CLEAR SEE-THRU Wiring Block & Color Coded Positive Crimp Lock Wire Clamps Provides Visual Inspection.
  • 30 Amp - 3750 Watts 125 Volts AC - Grounding Type Twist Lock.
  • HEAVY DUTY Use for Generators, Transfer Switches, Welding Equipment, RV, Trailer & Camper.
Check Stock

Monster Prolink Monster Classic Instrument Cable - 12 ft - Right Angle to Straight

  • BUILT FOR PERFORMANCE: Built with Monster's exclusive Time Correct Windings for deeper bass, and Speakon corrosion-resistant connectors.
  • NOISE REJECTION: The multi-gauge wire construction and high-purity copper conductor shields from signal interruptions and reduces noise.
  • LONG-LASTING QUALITY: The Duraflex outer jacket resists cuts and abrasions and provides lightweight flexibility that makes it easy to manage on stage.
  • SELF-LOCK CONNECTOR: Features Monster's custom self-locking twist-lock connector for secure plugging or unplugging even on the road.
  • LIFETIME CABLE WARRANTY: Covered by Monster's 100% replacement guarantee.
Check Stock

NewFantasia Replacement Audio Upgrade Cable Compatible with Sennheiser Momentum Momentum 2.0 HD1 Over-Ear On-Ear Headphones 1.8meters/5.9feet

  • Replacement Audio upgrade HIFI Cable with Twist-to-Lock connector deign Compatible with Sennheiser Momentum, Momentum 2.0 On-Ear & Wireless, Momentum....
  • Length: 1.8meters(5.9ft), package include: 1 replacement cable ( there is no headphone include ).
  • Cable Diameter : 4mm,cable material:the inside cable is OFC wire,the outside cable is Braided Tangle-Free cable.
  • Jack : 3.5mm Male & 6.35mm adapter to 2.5mm Male(comes with the lock the same as the Original cable).
  • This cable is only compatible with Sennheiser Momentum, Momentum 2.0 On-Ear & Wireless, Momentum 3 Wireless Noise Cancelling, HD1 Wireless....
Check Stock

Miller 129527 Conn,Tw Lk Insul Male(Dinse Type)50 Series

  • Premium quality Dinse-style insulated cable connector pair (male/female) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
  • Insulated Dinse-type male connector is with .355" diameter pin (25-mm) and 1/2" diameter pin (35-50mm, 50-70mm and 70-95mm)..
  • Compatible with Dinse-type twistlock connectors in mainstream welders ( Miller, Lincoln, ESAB, etc.). Available connector sizes 16-25mm (small 0.355" pin, #4-#3), 35-50mm (1/2" pin, #2-1/0), 50-70mm (1/2" pin, 2/0-3/0) and 70-95mm (1/2" pin, 3/0-4/0)..
  • All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

4 Pin RGB Male and Female Connector Wire Cable(10 Pack) with 10 x Male 4 Pin Plugs for 5050 3528 RGB LED Light Strip

  • 1.【Easy Installation】Easy to install no tool installation, no welding connection, 5050 4-pin RGB LED strip connector kit, plug and play.
  • 2.【Flexible】LED Strip Jumper Connector are fully bendable and are perfect for extending a run of LED light strip across a gap, around an obstacle, or for making a bend and the other side contacts are open to stick in..
  • 3.【Use Safety】 The pure copper wires inside are tin-plated, ensuring perfect electric conductivity and longer lifespan,and the conductor is made of tinned copper and PVC insulation sleeve, the insulation layer is soft and flexible..
  • 4.【Attention】When operate this connector,it need to be worked into all contacts touching at the right point and then lock them in, these connectors have little dimples to help lock in strip placement, it needed to be so exact in the placement of the strip..
  • 5.【What you get】10 pack 4 Pin RGB Male and Female Connector Wire Cable with 10 x Male 4 Pin Plugs,when you received the item with any problem,please contact with us for after-sale service..
Check Stock