Reviews Welding Cable Terminal Ends

WARN 22680 Quick Connect Winch Power Cable Connector Plugs, 1 Pair

  • {INSULATED FLAME-RETARDANT SHELL}: The shell of the battery quick connect/disconnect is made of high-quality PC flame-retardant material, with a fire rating of UL94 v-0, safe, wear-resistant, and compression-resistant, ensuring stability in use in complex and harsh environments.
  • {SILVER COPPER PLATED TERMINAL}: The thicker copper-plated silver of the battery quick connect disconnect set greatly enhances the electrical conductivity, which helps prevent ignition when large current passes, and ensures stable current transmission.
  • the copper terminal of battery quick disconnect kit is convenient for cold pressing, welding, and faster and firmer wiring.
  • {SPECIFICATIONS AND PACKAGING of the BATTERY QUICK CONNECTOR SET } Voltage: 12-36 volts DC.
  • the package contains 6 groups of 6 to 10 battery quick connectors, including 6 connectors, 12 terminal pins, 6 caps, the quantity is enough to meet your different Demand or replacement.
  • {EASY TO INSTALL}: You can quickly install the plugs of these battery quick disconnect connectors, insert the wires into the terminal pins, and then perform welding or crimping. The ends of the connectors are the same, so both ends are suitable for connecting to the power or load side.
Check Stock

KINGQ Welding Cable Joint Quick Connector Pair DINSE-Style 100Amp-200Amp (#6-#4) 16-25 SQ-MM 2-set

  • Premium Dinse-type insulated cable connector pair (male/female) and female terminal adapter (threaded stud to Dinse male connector) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
  • Insulated Dinse-type male connector is with .355" pin diameter (25-series) and 1/2" pin diameter (35/50/70-series). 45° angle terminal adapter with 17/32" stud hole and female acceptor for 1/2"-pin male plug..
  • Compatible with Miller 25-70 series Dinse twistlock connectors/adapters and fit other mainstream welders (Lincoln, ESAB, etc.) with Dinse connection: Miller 25-series (small 25-mm, #4-#3, P/N 127836/127835).
  • 50-series (35-50mm, #2-1/0, P/N 129527/129526).
  • 70-series (50-70mm, 1/0-3/0, P/N 134460/136600). Female terminal adapter is compatible with Miller 232728 (50/70-series, 1/2"-pin)..
  • All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

AWBLIN Battery Terminal Connectors, 2PCS Quick Release Disconnect Multiple Car Battery Terminal Replacement with Hex Wrench, Positive Negative for SAE/JIS Type A Posts

  • 4WAY BATTERY TERMINALS: This Car Battery Connector Multiple has 4 post for wire connection. Well Designed for multiple cable connections. Wiring is easy to modify. Really Convenient wiring and firm connection. This Heavy Duty Battery Terminals can fit on round post auto batteries SAE/JIS Type A posts..
  • POSTIVE & NEGATIVE: Positive (19mm/0.75in) Battery Terminal Clamps + Negative (17mm/0.67in) Battery Terminal Clamps. The Positive Negative Battery Terminal ends is Suitable for Most Battery models. This Car Battery Cable Ends work great for replacing worn out and corroded terminals..
  • DIMENSION: For wires diameters 0.20in – 0.29in (AWG gauges 1 – 4) or section 16 – 35mm². Max wire clamp: 8mm/0.31in. After the Quick Release Battery Terminals installing battery, connects to the battery posts by pressing down the lever, so no tools needed. The Battery Post Terminals do easy to operation..
  • HIGH QUALITy: The Battery Terminal Ends are made of tinned copper, with good electrical conductivity and corrosion resistance, which can reduce voltage distortion and transmission loss..
  • WIDE APPLICATION: These Automotive Battery Terminals can be used for Cars, Vans, Caravan, Motorhomes, Truck Batteries,RV etc. Just make sure that the Battery Clamps connect the correct....
Check Stock

Car Battery Terminals Connectors with 4 Ways Battery Clamps Quick Disconnect Battery Terminal with Hex Wrench Tinned Copper,Positive&Negative Applicated in Car Truck RV etc.

  • 【4WAY BATTERY TERMINALS】This Car Battery Connector Multiple has 4 post for wire connection. Well Designed for multiple cable connections. Wiring is easy to modify. Really Convenient wiring and firm connection. This Heavy Duty Battery Terminals can fit on round post auto batteries SAE/JIS Type A posts..
  • 【POSTIVE & NEGATIVE】 Positive (19mm/0.75in) Battery Terminal Clamps + Negative (17mm/0.67in) Battery Terminal Clamps. The Positive Negative Battery Terminal ends is Suitable for Most Battery models. This Car Battery Cable Ends work great for replacing worn out and corroded terminals..
  • 【DIMENSION】For wires diameters 0.20in – 0.29in (AWG gauges 1 – 4) or section 16 – 35mm². Max wire clamp: 8mm/0.31in. After the Quick Release Battery Terminals installing battery, connects to the battery posts by pressing down the lever, so no tools needed. The Battery Post Terminals do easy to operation..
  • 【HIGH QUALITY】The Battery Terminal Ends are made of tinned copper, with good electrical conductivity and corrosion resistance, which can reduce voltage distortion and transmission loss..
  • 【WIDE APPLICATION】These Automotive Battery Terminals can be used for Cars, Vans, Caravan, Motorhomes, Truck Batteries,RV etc. Just make sure that the Battery C....
Check Stock

WeldingCity 100-amp 10-ft Air-cooled MIG Welding Gun Torch Stinger Replacement for Miller Millermatic MIGmatic M-Series M-100/M-10 (248282)

  • Premium quality 100-amp/150-amp/250-amp with 10-ft, 12-ft and 15-ft cable air cooled MIG welding gun, ideal replacement for Miller MIGmatic M-series. Control cable is with 2-pin Amphenol type terminal..
  • M-series MIG gun M-100/M-150/M-25/M-40 can be found in many Miller machines like Millermatic, DVI, Passport, Challenger, Pulser, Vintage or Hobart IronMan, etc. See all listed pictures for details of front consumables, rear plug and control cable type. CHECK YOUR WELDER MANUAL FOR MATCHING..
  • Referenced part number from Miller: 248282 (M-100/10-ft).
  • Front consumables come with 000068 (0.035") contact tip, 169715 (M-100/M-150) and 200258 (M-25) nozzle, 169716 (M-100/M-150) and 169728 (M-25) gas diffuser, 169729 (M-25) nozzle adapter and 194011 wire liner. Current rating: 100A, 150A and 250A.
  • Cable length: 10-ft, 12-ft and 15-ft. Control cable terminal: 2-pin Amphenol type..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

EZSync HDMI to Terminal Block Adapter Kit, 2X Pack, Solderless Breakout Board, Plastic, EZSync912

  • The EZSync912 HDMI to terminal block adapter connects all 20 signals(including shielding) from a HDMI connector to two 10-position terminal block connector. The two 10-pin terminal blocks support screw-type wiring with enclosure and cable strain relief suitable for heavy duty industrial wiring applications..
  • Plastic case. Solderless terminal block. Compatible with HDMI 2.0, 1.4 and 1.3. Distance will be depending on cable quality..
  • Each package contains 2x sets of adapter kit. Size: Body-50mm x 23mm x 18mm.
  • Wiring diagram provided in image is for typical installation. The actual wiring could be different depending on your equipment..
  • If you don't know the wiring order on the other end of the cable, you need to ohm it out if you have a meter or cut the other end and re-wire both ends.
Check Stock

TKDMR 2Pairs Car Battery Cable Terminal Clamps-Connectors - Battery Terminal with Plastice Cover,Good Contact,Corrosion Resistance,Applicated in Car,Van.

  • √【Package Includes】: Our kit includes 2 pair of Negative and Positive Battery Cable Terminal Clamps Connectors and 4 pieces Pure Copper Wire Lugs Battery Cable Ends Copper Eyelets Tubular Ring Terminal Connectors..
  • √【High Quality】: Our Wire Lugs Eyelets Tubular Ring Terminal all are made of pure copper.And the Battery Terminals connectors has plastic cover, which is connected better than zinc alloy and has better corrosion-resistance..
  • √【Size】: Positive Battery Terminal Connectors:11/16"(17mm).
  • Positive Battery Terminal Connectors: 5/8"(16mm).
  • √【Applicated Scene】: It is used for automobiles, trucks and caravan battery terminal connector..
  • √【Quality Guarantee】: We are manufacturers. So don't worry about quality. We are highly confident with our products.you won't regret it if you got it! Buy it now!.
Check Stock

EVERGEAR Jumper Cables 4 Gauge 20 Feet with Smart-7 Protector, 600A Heavy Duty Booster Cables for SUV, TRUCK, CAR, ETL Certified, Battery Status Tester, -40℉ to 167℉, 5 Year Warranty, Carry Bag

  • .... The jumper cables are PVC insulated remain flexible at -40F/-40C to 167F/75C which have a high temperature rating, and are oil resistant. They tend to be large gauge wires and can work well as jumper cables..
  • 【1000A Strong Clamps】 - Clamp jaw designed for side and top post. Strong spring make the clamp hold up terminal well and no falling off. The battery cables gauge ends feature large alligator clamps with strong jagged teeth and an inside tongue for double connection with the battery terminal in tight spots..
  • 【ETL SAE UL Certified】 - The jumper cable with SAE standards & ETL, UL Certified, and Copper Coated Aluminum for outstanding electrical conductivity and power transfer gives you the best conductivity and power transfer you could ask for. These cables are color-coded red and black for positive and negative identification..
Check Stock

150pcs Battery Cable Ends, Copper Wire Lugs Assortment Kit AWG 2 4 6 8 10 Gauge - 70Pcs Battery Cable Lugs Ring Wire Terminal Connectors and 80Pcs Heat Shrink Tubing Kit for Marine Electrical Supplies

  • ...resistant purple copper to ensure the reliability of the connection. Surface pickling mitigates oxidation. Standard lugs opening facilitates wire insertion. The inspection window is designed to check the correct and complete cable insertion. Each wire lugs has a specification mark, so you can quickly find the right terminal. Copper wire lugs can be easily and safely crimped or soldered to the cable..
  • [EASY INSTALL] Battery lugs are used in conjunction with heat shrink for power draw or grounding, making wiring safe, reliable and work professionally. Flame retardant and insulated heat shrink is made of polyolefin, which is pre-cutting into common sizes for selection to improve working efficiency. Crimp or solder cable into copper wire lugs, insert heat shrink, apply to heat. It will shrink quickly and wrap cable well. Red and black color make us quickly identify positive and negative cables..
  • [COPPER LUGS KIT] For electrical, various sizes of wire lugs are needed to carry sufficient amperage between components. 150pcs wire connectors kit has a assortment of terminals for you to freely choose, Including 10 types of 70PCS of AWG 2 4 6 8 10 copper wire lugs, 3 size....
Check Stock

Schumacher BAF-MT1 Zinc-Plated Marine Terminal Ends – Fits 3/8-inch and 5/16-inch Posts

  • DESIGNED FOR MARINE USE: Easily replace your boat battery’s terminal ends with a high-performance alternative..
  • RELIABLE: The Schumacher BAF-MT1 Zinc-Plated Marine Terminal Ends are three times more conductive than other terminal ends..
  • USABLE: The BAF-MT1 includes one positive 3/8-inch terminal end and one negative 5/16-inch terminal end..
  • BUILT GREEN: Meets the standards established for RoHS (Restriction of Hazardous Substances) compliance..
  • SUPERIOR CONSTRUCTION: The BAF-MT1 replacement Marine Terminal Ends feature heavy-duty zinc-plated construction..
  • LONG-LASTING QUALITY: Trust Schumacher Electric for reliable and well-made battery accessories. Schumacher has been producing quality automotive products since 1947..
  • EASY TO USE: The BAF-MT1 replacement terminal ends feature easy-to-tighten wing and hex nuts for a secure connection..
Check Stock

Broadfashion Mig Welding Gun Torch 15AK Welding Machine Stinger Replacement Accessories Flexible Torch Fit for Mig Mag Welding Equipment Tool

  • 【Safety Product】High-quality replacement MIG gun, stinger vacuum, stainless steel wire, standard welding torch head, international high-quality cable, safe welding. MIG/NBC-200S, MIG/NBC-200Y, MIG/NBC-200F, MIG/NBC-250Y, MIG/NBC-250F and other welding machines..
  • 【Portability Use】High quality 100Amp stinger gun to replace MIG gun, 10 feet cable. The 50A-125A European-style machine interfaces are all usable, very small and very suitable for families, farms, shops and light-weight bodies..
  • 【Scope of Application】MIG gun can be used for SP-85, SP-100, SP-100I, SP-100T, SP-125 Plus, SP-130T, SP-135 Plus, SP-140I, SP-155, SP-170, SP-170I, SP-170T, SP-175 Plus, SP-175T, the blowtorch is very suitable for most people, and the light and balanced curved handle provides a comfortable grip and reduces fatigue..
  • 【Flexibility and Bendable】The cutting torch has flexibility, foldability and bendability, and its welding range can be extended to dead ends. Use advanced technology to manufacture high-pressure hoses. Make it resistant to oil, aging, corrosion, acid and alkali. The one-piece design is particularly resistant to high temperature and splash, and has a long service life..
  • 【Tensile Performance】Bending spring: Reinforce both ends of the joint. T....
Check Stock

Hammer Lug Crimper Tool, Huazu Hammer Crimper Wire Terminal Crimper for Crimps Battery and Welding Cables 8 AWG to 2/0 Wire Gauge

  • FEATURES: All steel material, sturdy and durable. Tight riveting, small size and easy to carry. The elasticity of the compression spring acts on the crimping port, so that the port is in contact with the terminal at all times for easy operation..
  • WIRE GAUGE: 8 AWG, 6 AWG, 4 AWG, 2 AWG, 1 AWG, 1/0 and 2/0 (American Wire Gauge) cable..
  • EASY TO USE: Adjust the size of the wire terminal crimper according to the wire. The V-shaped channel can fix the terminal in place and prevent it from sliding. Then put the connector and cable under the hammer crimping machine to keep it stable, and finally hit 1-2 times with a hammer to clean crimps. It is recommended to use a larger hammer..
  • CRIMPING TOOL: Hammer Lug Crimper Tool is ideal for batteries and welding cables..
  • PRODUCT GUARANTEE: You can enjoy our first-class service with 12-MONTH Warranty and 24-hour support for customer service. Please feel free to contact us if you have any issues..
Check Stock

WeldingCity 100-amp 9-ft Air-cooled MIG Welding Gun Replacement Torch Stinger for Clarke Welder 130EN 180EN 140T

  • Premium quality 100-amp with 6-ft and 9-ft cable air cooled MIG welding gun, ideal replacement for Clark 130EN, 180EN and 140T. Reference Clark P/N: WE23000037..
  • With trigger direct plug, gas line and power cable lug terminal designed for easy replacement to many Clarke or Shark welders 85EN, 130EN, 180EN, 140T etc. with Tweco style torch. See all listed pictures for details of front consumables, rear plug and control cable type. CHECK YOUR WELDER MANUAL FOR MATCHING..
  • Front consumables comes with Tweco style 11-35 (0.035") contact tip, 21-50 nozzle and 35-50 gas diffuser. Current rating: 100-amp..
  • Small, lightweight gun that's great for most home, farm and small shop projects, auto-body work and light maintenance or repair applications..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock