Reviews Welding Adapter

Hanperal 65mm SDS Plus Shank Hole Saw Cutter Concrete Cement Stone Wall Drill Bit

  • Made of carbide tipped metal material,very durable..
  • Simple operation, easy to use,and fast perforated..
  • Used for drilling walls, stones, bricks,or installation of air-conditioning etc..
  • SDS plus shank, male thread Adapter,Greatly replace the broken adapter with your drill chuck..
  • High-frequency welding technology, welding openings is very strong, smooth inside and outside welding mouth..
Check Stock

Makita PR00000034 1-3/8\ Welding Nozzle

  • WELDING NOZZLE SUPPORT: PVC floor round welding nozzle with wheels, can be used with welding wire, with rollers to guide the welding seam straighter..
  • WELDING NOZZLE WITH WHEEL: The welding nozzle with wheel can be directly fixed on the hot air gun. When there is a wheel, the wheel can be directly attached to the gap, and the gap can be filled evenly along the line of the gap, which can solve the manual filling of the weld. The filling is not straight..
  • WELDING ROD SPECIFICATIONS: Hot Air Gun Welding Nozzle can use 3mm/4mm/5mm..
  • WELDING NOZZLE WITH WHEEL ADAPTER: 8mm inner diameter of the heat gun nozzle, which can be matched with any other welding nozzle with an outer diameter of 8mm..
  • MATERIAL: 304 stainless steel alloy, with good corrosion resistance and heat resistance, can withstand high temperatures of 800-1000℃, will not rust, oxidize, and deform under high temperature for a long time. It is an ideal accessory for plastic welding..
Check Stock

YESWELDER Mig Welding Gun Torch Stinger 15ft (4.5m) 250 Amp Replacement for Miller M-25 169598 fit Millermatic 212 & 252

  • Premium quality 250Amp replacement MIG gun stinger torch, 15-foot (4.5m) cable.
  • This gun is a direct replacement for the GA-20C, GA-21C, and M-25 169598 welding guns..
  • Use standard Miller front consumables uses the same 169 726 gas nozzle, the same 169 728 tip adapter, the same 169 729 nozzle adapter, and the same contact tips as the OEM Miller gun .030-.035(0.8-0.9MM) diameter welding wire.
  • This 15 ft long gun will handle.030-.045(0.8-1.2mm) diameter welding wire,It comes standard with a .035"(0.9mm) diameter tip in the welding gun,and one more .035 and .045 tips in the package.
  • It fits all of the following models: Millermatic 200, 210, 212, 250, 250X, 251, 252, and Vintage.
Check Stock

WeldingCity MIG Welding Gun Accessory Kit .035 Contact Tip-Gas Nozzle-Gas Diffuser-Nozzle Adapter for Lincoln Magnum 200/250 and Tweco #2 180-250 Amp

  • Premium MIG welding gun accessory kit includes consumable parts of contact tips, gas nozzles, nozzle adapter and gas diffusers for use with Lincoln,....
  • Work with 180-250 Amp MIG welding gun such as Lincoln Magnum 200/250 series, Tweco #2 and other equivalent MIG guns..
  • Content in each accessory kit: Tweco style consumables.
  • 2-pcs slip-on gas nozzles 22-50 (1/2"), 2-pcs gas diffusers 52, 2-pcs nozzle adapter 32 and....
  • For welding wire size: 0.023" (0.6mm), 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm). Please refer to all listed pictures for part compatibility..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

Titan Attachments Adapter to Convert Toro Dingo to Full Size Skid Steer QT

  • HEAVY DUTY LIGHTWEIGHT DESIGN: The toro to skid steer adapter weighs only 115 LB, yet is built to allow your toro to mount directly to full size skid....
  • UNIVERSAL SKID STEER CONNECTION: - Compatible with Toro Dingo, Ditch Witch, Multi One, Ram Rod, Vermeer, Finn Eagle, Boxer, Thomas, and others with....
  • A MUST HAVE FOR LANDSCAPING AND CONSTRUCTION: Titan Attachments Low Profile Toro to Skid Steer Adapter now allows you to take advantage of your full....
  • NO WELDING OR MODIFICATION NEEDED: This adapter comes ready to attach directly to your Toro without any modifications, bolting or welding required.....
Check Stock

Titan Attachments 3-Point Quick Hitch fits Cat 1 & 2 Tractors Easily Adjustable

  • CATEGORY 1 OR 2, 3-POINT HOOKUP: This adapter is designed to convert your Category 1 or 2, 3 Point hitch into a quick hitch. This allows you to easily connect your tractor to your 3 Point implements within minutes saving you time and labor..
  • NO WELDING OR MODIFICATION NEEDED: This adapter comes ready to attach directly to your Tractor’s 3 Point hitch without any modifications, bolting or welding required. Back your tractor right up to the back of the adapter, hook into the top link bar, and connect your lower lift pins. It is that easy!.
  • DURABLE CONSTRUCTION: The quick hitch adapter is constructed with 3 x 3-inch tubular steel and reinforced with 9-Gauge steel gusset plates. The Titan Category 1 and 2, 3 Point Quick Hitch is powder-coated Black to protect against rust and corrosion..
  • DIMENSIONS: This adapter is rated at 3,000-pound lifting capacity and is 31-inches wide, stands 23.5-inches high, and has a depth of 8-inches. The lower lift pin hooks sit 29-inches center to center and are 1.25-inches thick. The implement weighs 60-pounds..
Check Stock

Titan Attachments Quick Hitch Cat 1 and Cat 2, 3 Point Green Steel

  • DURABLE LIGHTWEIGHT DESIGN: The quick hitch adapter is constructed with 4 x 4inch tubular steel and reinforced with 9Gauge steel gusset plates. The Titan Category 1 and 2 Quick Hitch is powdercoated to protect against rust and corrosion..
  • CAT 1 OR 2 3PT CONNECTION: This adapter is designed to convert your category 1 or category 2 3 point hitch into a quick hitch. This allows you to easily connect your tractor to your 3 pt implements within minutes saving you time and labor..
  • A MUST HAVE FOR LANDSCAPING AND CONSTRUCTION: Titan Attachments Green Quick Hitch Adapter now allows you to quickly and easily attach your category 1 or 2 implements to your tractors 3 point. Due to the speed and ease at which you can connect these attachments, it becomes an invaluable piece of equipment saving you time and money..
  • NO WELDING OR MODIFICATION NEEDED: This adapter comes ready to attach directly to your Tractors 3Pt hitch without any modifications, bolting or welding required. Back your tractor right up to the back of the adapter, hook into the top link bar and connect your lower lift pins. It is that easy!.
Check Stock

Titan Attachments Green Category 2, 3 Point Quick Hitch Adapter

  • CATEGORY 2, 3-POINT HOOKUP: This adapter is designed to convert your Category 2, 3 Point Hitch into a quick hitch. This allows you to easily connect your tractor to your 3 Point implements within minutes saving you time and labor..
  • NO WELDING OR MODIFICATION NEEDED: This adapter comes ready to attach directly to your Tractor’s 3 Point Hitch without any modifications, bolting, or welding required. Back your tractor right up to the back of the adapter, hook into the top link bar, and connect your lower lift pins. It is that easy! Note, the top link pin is not included..
  • DURABLE CONSTRUCTION: The quick hitch adapter is constructed with 4 x 4-inch tubular steel and reinforced with 9-Gauge steel gusset plates. The Titan Category 2 Quick Hitch is powder-coated Green to protect against rust and corrosion..
  • DIMENSIONS: This adapter is rated at 4,000-pound lifting capacity and is 37.25-inches wide, stands 19.5-inches high, and has a depth of 9-inches. The lower lift pin hooks are 32.5-inches center to center and are 2-inches thick while the top hook is 1.25-inches wide. The implement weighs 97-pounds..
  • NOTE: This unit is designed to receive Category 2 implements and will receive Category 1 implements with the use of conversion bushings on your lower lift pins a....
Check Stock

Titan Attachments Category 2 Quick Hitch 3 Point Powder Coated Steel

  • CATEGORY 2, 3-POINT HOOKUP: This adapter is designed to convert your Category 2, 3 Point Hitch into a quick hitch. This allows you to easily connect your tractor to your 3 Point implements within minutes saving you time and labor..
  • NO WELDING OR MODIFICATION NEEDED: This adapter comes ready to attach directly to your Tractor’s 3 Point Hitch without any modifications, bolting, or welding required. Back your tractor right up to the back of the adapter, hook into the top link bar, and connect your lower lift pins. It is that easy! Note, the top link pin is not included..
  • DURABLE CONSTRUCTION: The quick hitch adapter is constructed with 4 x 4-inch tubular steel and reinforced with 9-Gauge steel gusset plates. The Titan Category 2 Quick Hitch is powder-coated Black to protect against rust and corrosion..
  • DIMENSIONS: This adapter is rated at 4,000-pound lifting capacity and is 37.25-inches wide, stands 19.5-inches high, and has a depth of 9-inches. The lower lift pin hooks are 32.5-inches center to center and are 2-inches thick while the top hook is 1.25-inches wide. The implement weighs 97-pounds..
  • NOTE: This unit is designed to receive Category 2 implements and will receive Category 1 implements with the use of conversion bushings on your lower lift pins a....
Check Stock

SIMDER MIG Welder 140A Flux Core Welder MIG/Stick 2 in 1 Welding Machine Gasless 110V/220v Dual Voltage IGBT DC Inverter Welder

  • 【Easy Start for Beginner】The Synergic mode on this MIG welder will automatically change the voltage by adjusting the current. Very easy to operate and start for beginners. Advanced IGBT&Inverter make this MIG welder a portable and efficient welding tool..
  • 【Dual Voltage ARC&MIG Welders】This is an ARC&MIG 2 in 1 Welding machine. 140Amp DC 110V/220V Dual Voltage MIG welder. Package includes MIG Torch,Electrode holder,Ground clamp, 110V/220V Adapter and etc..
  • 【Multi-Application MIG Welder】This Wire Feed MIG Welder is suitable for welding iron, carbon, steel and etc. Great choice for household welding, or DIY project on steel..
  • 【APPLICABLE FLUX CORE WIRE & RODS】The wire MIG welder apply for .030"(0.8mm) &. 035" (1.0mm) welding wire. ARC mode fits rods: E7018, E6013, E6011..
  • 【What’s more】SIMDER is a professional welding machine manufacturer, we aim to provide a better welding tool and make welding easier. If you have any questions, feel free to contact us.
Check Stock

WeldingCity 200-amp WP-26FV-25R Flexible Head w/Gas Valve Air-cooled TIG Welding Torch Complete Package with 25-ft Power Cable Hose and Adapter 45V62

  • Premium quality 200-amp air-cooled WP-26 complete TIG welding torch package with 12.5-ft or 25-ft 1-piece EPDM rubber power cable. Shipped as un-assembled..
  • 12-pcs torch package includes: 200-amp air-cooled WP-26 series high quality silicone rubber torch body with handle, 1-piece type EPDM rubber power cable hose 46V28R (12.5-ft) or 46V30R (25-ft), Nylon cable cover with zipper.
  • brass cable adapter 45V62 and accessory kit (1/16" and 3/32" collets, collet bodies, ceramic cups and back caps)..
  • Silicone rubber insulated torch bodies are designed for long lasting service. Available head types: WP-26 (regular), WP-26F (flexible head), WP-26V (head with gas valve) and WP-26FV (flexible head with gas valve)..
  • 200-amp air-cooled WP-26 series TIG torches are excellent for TIG welding on medium to heavy gauge materials. With brass cable adapter 45V62 to connect the torch to gas tank and welding machine with standard 1/2" threaded output stud. Ideal replacement of TIG welding torch for all mainstream welders on markets, as well as ideal for many other aftermarket or equivalent welders. See all listed pictures for torch parts and rear plug. CHECK YOUR TIG WELDER FOR MATCHING..
  • U.S. based welding and hardware supplier. Strong technical support with experienced custom....
Check Stock

COMPLETE ALUMINIUM WELDING GUIDE: Complete beginners guide on aluminium welding, tips, benefits of aluminium and tips for mig welding

  • 【2 IN 1 MACHINE】MIG160 is MIG and MMA 2 function- 2 in 1 modes what you need. Welding Machine can be plugged into 110V / 220V dual voltage. The application of IGBT technology has significantly enhanced the welding machine's reliability and turned them into a lighter and compact version ..
  • 【OVERLOAD SAFETY PROTECTION】 - FORTON MIG160 welder come with a safety feature where the welder is automatically turned off when it it too hot or the volt or current exceed their range. This function will keep you and your welder safe. Internal fan-cooling system,there is a fan helping to air cooling the welder when working..
  • 【EASY TO CONTROL WELDING】 -This MIG160 welding machine is an amazing portable welding unit. The adjustments are simple, the sound is smooth and the welds are outstanding quality. Automatic settings are pretty accurate. The welding machine case is metal and sturdy. 100% satisfied with the fast wire feed rate way wether it welds thick or thin matel. Less splash, simple usage and great welding seam..
  • 【WIDE APPLICATIONS】This machine is super portable and light. In addition, the machine is with powerful functions and suitable for wide occasions. It can be used for hardware welding materials, home DIY, industrial installation, autom....
Check Stock

LONGEVITY Tigweld 200sx - 200 Amp AC DC Tig/Stick Welder with Digital Display 110v 200v

  • The unit features high frequency start tig and includes a foot pedal for great tig welding control and operation.
  • The stick welder operates on 110v and 220v volts and is capable of welding 7018, 6013, and other stick welding electrodes.
  • With the flip of a swtich, you are able to weld aluminum in AC mode. Features pre-flow, post flow, and clearance effect (balance) function for greater welding control.
  • Great machine for the hobbyist or professional with an easy to use panel. Excellent heat control.
  • Extemely portable weighing 37 lbs and easily carried to any job on site or offsite. The 110v adapter makes it easy to connect to a standard usa outlet..
Check Stock