Reviews Welding Accessory

Makita PR00000034 1-3/8\ Welding Nozzle

  • WELDING NOZZLE SUPPORT: PVC floor round welding nozzle with wheels, can be used with welding wire, with rollers to guide the welding seam straighter..
  • WELDING NOZZLE WITH WHEEL: The welding nozzle with wheel can be directly fixed on the hot air gun. When there is a wheel, the wheel can be directly attached to the gap, and the gap can be filled evenly along the line of the gap, which can solve the manual filling of the weld. The filling is not straight..
  • WELDING ROD SPECIFICATIONS: Hot Air Gun Welding Nozzle can use 3mm/4mm/5mm..
  • WELDING NOZZLE WITH WHEEL ADAPTER: 8mm inner diameter of the heat gun nozzle, which can be matched with any other welding nozzle with an outer diameter of 8mm..
  • MATERIAL: 304 stainless steel alloy, with good corrosion resistance and heat resistance, can withstand high temperatures of 800-1000℃, will not rust, oxidize, and deform under high temperature for a long time. It is an ideal accessory for plastic welding..
Check Stock

WeldingCity 100-ft 2-AWG USA-made Heavy Duty Welding Cable Highly Flexible Durable EPDM Rubber Jacket 600V -50C-105C Black

  • ...ils, and acids and is also weather, ozone and sunlight resistant. Available welding cable sets: welding cable only.
  • cable set with terminal lugs and cable set with Dinse connectors..
  • Welding Cable Set With Terminal Lug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp and three zinc-plated copper terminal lugs (1/2" stud hole)..
  • Welding Cable Set With Dinse Plug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp, one zinc-plated copper terminal lug (1/2" stud hole) and two Dinse-type 35-50mm male connectors..
  • Heavy duty 300-amp stick electrode holder with strong jaw spring.
  • both upper and lower jaws made of copper (brass) with increased operator comfort. Zinc-plated steel 300-amp work clamp with strong spring, copper plated jaw, copper braid, copper plated hex screw for secured cable connection. Dinse-type twist-lock cable connector (male) with heat and oil resistant covers and accessories.
  • 1/2" (12.7mm) pin. Accepts cables AWG #2-1/0 (nominal cable area 35-50mm²)..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buy....
Check Stock

WeldingCity TIG Welding Torch Accessory Kit Large Gas Lens Setup 1/8 Collet-Large Gas Lens-Cup-Gasket-Back Cap for Torch 9 20 and 25 Series Lincoln Miller Hobart ESAB Weldcraft CK AHP T45

  • Premium TIG welding torch accessory kit (large gas lens set-up) for air-cooled and water-cooled TIG torch 9, 20 and 25 series for use with Tungsten....
  • Accessory kit contains torch consumables 13NL-series collets and 45VS large gas lens collet bodies (0.040", 1/16", 3/32" and 1/8"), 53N/57N-series....
  • Detailed content description for each accessory kit is shown in listed parts table and pictures. Compatible with TIG welding torches from Lincoln,....
  • For use with air-cooled TIG welding torch 9-series (125-amp), water-cooled 20-series (250-amp) and 25-series (200-amp)..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

WeldingCity MIG Welding Gun Accessory Kit .035 Contact Tip-Gas Nozzle-Gas Diffuser-Nozzle Adapter for Lincoln Magnum 200/250 and Tweco #2 180-250 Amp

  • Premium MIG welding gun accessory kit includes consumable parts of contact tips, gas nozzles, nozzle adapter and gas diffusers for use with Lincoln,....
  • Work with 180-250 Amp MIG welding gun such as Lincoln Magnum 200/250 series, Tweco #2 and other equivalent MIG guns..
  • Content in each accessory kit: Tweco style consumables.
  • 2-pcs slip-on gas nozzles 22-50 (1/2"), 2-pcs gas diffusers 52, 2-pcs nozzle adapter 32 and....
  • For welding wire size: 0.023" (0.6mm), 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm). Please refer to all listed pictures for part compatibility..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

DEWALT Die Grinder, 1-1/2-Inch (DWE4887)

  • 4.2 amp, 25,000 rpm motor of the die grinder provides high power and speed for all 1-1/2-inch grinding applications.
  • AC/DC capacity pf the electric die grinder works off welding machines and generators for increased productivity and versatility.
  • DEWALT die grinder has a convenient paddle switch with lock-on button for easy gripping.
  • Precision 1/4-inch collet securely holds all proper accessories (1/8-inch reducing sleeve as optional accessory).
  • 4.2 Amp, 25,000 rpm motor provides high power and speed for all 1-1/2" grinding applications.
  • AC/DC capacity works off welding machines and generators.
  • Paddle switch with lock-on button for easy gripping.
  • Precision 1/4" collet securely holds all proper accessories (1/8" reducing sleeve as optional accessory).
Check Stock

Neiko 10909A Fiberglass Fire Retardant Welding Blanket | 6' x 8' | Brass Grommets | Thermal Resistant, clear

  • [DURABLE]: 100% flame retardant, thick, durable, and general purpose welding blanket prevents property damages from sparks, spatter and protects..
  • [HEAVY DUTY]: 19.8 oz. per sq.yd. fiberglass to provide excellent thermal protection up to a working temperature of a 1000 degrees Fahrenheit for any type of light to heavy duty welding application..
  • [DESIGN]: 30 x 30 per square inch for added durability and stands up to long term repeated use withstanding wear and promotes fire suppression and safety..
  • [REINFORCED HEM]: 3/8” I.D. brass grommets every 11” for secure and easy hanging making for the perfect welding accessory..
  • [STORAGE]: Easy to fold welding blanket is flexible and can be stored away with ease..
Check Stock

COLIBROX Professional Portable Oxygen Acetylene Oxy Welding Cutting Weld Torch Tank Kit

  • General Maintenance Work - Extremely Popular General Maintenance Work, Automotive Repair, Metal Sculpture, Air Conditioning, Refrigeration etc.
  • Ideal Use - For iron or steel welding, braze-welding, plus brazing, cutting, bending & forming.
  • Waterproof Storage Compartment - Carrier is made of tough, lightweight polypropylene.
  • Regulator Type - Rear entry regulators for better balance on the small cylinders Oxygen Regulator Type: (CGA540) Acetylene regulator Type: (CGA200).
  • Complete Set - Compatible gas-welding accessory kit includes a 20cu. ft oxygen tank and 10cu. ft acetylene tank with regulators, along with full brass torch assembly.
Check Stock

Mig Welding Gun Accessory .030

  • Mig Welding gun accessory kit 0.030" for Miller Hobart with mig welding contact tip,gas nozzle,gas diffuser for Miller Millermatic M-10, M-15 and Hobart H-9,H-10.
  • Including:20pcs Contact Tips 000-067 0.030" + 2pcs gas nozzles 169-715 1/2"+ 2pcs gas diffusers 169-716.
  • Fits for Miller Millermatic M-10, M-15 and Hobart H-9,H-10.
  • Amazon satisfied customer service & fast ship.
Check Stock

Mini Welding Machine 110V Plug, 250A Stick MMA Welder Machine IGBT Digital Smart VRD Hot Start with Wire、Tongs, Ground Wire, Clip, Mask and Gloves.fits Below 3.2mm Welding rods

  • ... body, and a colorful hard carton packaging for easy storage and portability. Whether you work indoors or out, this welding machine is your go-to welding tool..
  • Every Miuezuth IGBT rod stick welder machine is inspected before leaving the factory to ensure that it meets the high standards we set. Every semiconductor, accessory, cable, electronic board, and spare part has been thoroughly inspected..
Check Stock

Professional Portable Oxygen Acetylene Oxy Welding Cutting Torch Kit W/Gas Tank Torch Cutting and Welding Portable Kit

  • General Maintenance Work - Extremely Popular General Maintenance Work, Automotive Repair, Metal Sculpture, Air Conditioning, Refrigeration etc..
  • Ideal Use - For iron or steel welding, braze-welding, plus brazing, cutting, bending & forming..
  • Waterproof Storage Compartment - Carrier is made of tough, lightweight polypropylene.
  • Regulator Type - Rear entry regulators for better balance on the small cylinders Oxygen Regulator Type: (CGA540) Acetylene regulator Type: (CGA200)..
  • Complete Set - Compatible gas-welding accessory kit includes a 20cu. ft oxygen tank and 10cu. ft acetylene tank with regulators, along with full brass torch assembly..
Check Stock

Reliancer 3-Tier Rolling Welding Cart MIG TIG ARC Plasma Cutter Machine Heavy Duty Welding Welder Cart 180 Lbs Weight Capacity with Tank Storage & 2 Cable Hooks & Safety Chain Plasma Cutting Equipment

  • The bottom shelf is 17.7"(L) x 11.6"(W)x15.7"(H).
  • 【A Practical Tool for Welding Work】If you are seeking for a practical welding cart for convenience in welding task,this Reliancer professional welder cart is highly recommended for you!It’s a piece of must-have accessory for weldors,handymen and sculptors,perfect for transporting and storing most MIG,TIG,ARC welding machines,plasma cutter,gas cylinder,hoses,helmet and other welding accessories and supplies,and keep them organized in one place.Suitable for use in home garage,workshop,repair shop.
Check Stock

Ball Lock Keg Posts 304 Stainless Steel Ball Lock Post Homebrew Keg Ball Lock Post Connector Adapter Poppet Female Thread Gas + Liquid 9/16in18 Brewing Accessory Beer Brewing Kegs Kegging

  • Pressure Resistance--Without welding, higher pressure resistance, corrosion resistance and pressure resistance..
  • Good Sealing--Ball lock with Oring, with good sealing performance to prevent leakage of gas and liquid connections..
  • Portable Design--It is compact and portable, no need tools, can be installed and used directly to help you brew craft beer..
  • Stainless Steel--Selected highquality 304 stainless steel material, high hardness, strong and durable.Without welding, higher pressure resistance, corrosion resistance and pressure resistance..
  • Practical Brewing Accessory--Exquisite workmanship, long service life, which is a practical home brewing accessory..
Check Stock

Welding Gas Regulator Valve CO2 Gas Regulator Flowmeter Brass Welding Regulator Valve Brass Flowmeter Gas MIG Welding TIG Welding Equipment

  • 0 to 25LPM Output Flow: The output flow of CO2 gas regulator is adjustable from 0 to 25lpm. and represented by a ball moving up and down in flow tube..
  • Reliable Flowmeter: This flowmeter does not use a diaphragm and therefore more reliable than a flowmeter style regulator..
  • Material: The body material is brass that brass flowmeter has excellent ductility..
  • Application: Welding gas regulator valve is a kind of TIG welding accessory which is perfect for most welders..
  • Parameter: Welding regulator valve output flow range is 0-25LPM, pressure gauge range is 0-3500psi,threaded connection is 5/8in x 18 male connector....
Check Stock