Reviews Welded Hydraulic Cylinder

The ROP Shop | Hydraulic Cylinder 4x24 Bore x Stroke for Dirty Hand Tools 22 Ton 100171, 100950

  • The ROP Shop replacement Hydraulic Cylinder 4x24 Bore x Stroke for Dirty Hand Tools 22 Ton 100171, 100950.
  • Specs - Bore: 4". Stroke: 24". Clevis Mounting Holes Diameter: 1 1/8". Chrome Rod Diameter: 1 3/4" with 9/16" Mounting Hole. Maximum Operating Pressure: 3500 PSI. Welded Design. Double Acting. Rebuildable. Refer to images 2 & 3 for more information.
  • for/fits many of the following brands of log splitters: Tractor Supply Co (TSC), CountyLine, Huskee, MTD, Oregon, SpeeCo & SplitMaster.
  • Please be sure to verify your specs and/or part/model number to ensure correct fitment. Note: this is a new hydraulic cylinder, but may have some spots where paint is chipped off.
Check Stock

VEVOR Double Acting Hydraulic Cylinder 2'' Bore, Top Link Hydraulic Cylinder 10'' Stroke, Retracted 18\ Extended 26 Hydraulic Side Link Swivel Eye Bearing w/Check Valve for Tractors, Category 1, 2

  • High Tensile Steel Structure: This hydraulic lifting cylinder is a welded double acting cylinder. It has a high tensile honed cold drawn hydraulic tube, a polished piston rod, and sturdy threaded glands. With bearing design on base ends. Carbon steel construction ensures its longevity and features a max 6700 lbs pushing force and 4500 lbs pulling force..
  • 2"-2.5" Bore 10" Stroke Top Link: The top link cylinder is built under specific dimensions. Bore: 2"-2.5". Stroke Length: 10". Rod Size: 1". Pin Size: 0.8". With retracted min length 20" and extended max length 28". Double Pilot Check Valve Port Size: G3/8. Max Pressure: 5076PSI. Max Flow Rate: 20 L/ min. Opening Pressure: 50.76 PSI..
  • Swivel Eye Bearing Design: There is a spherical swivel eye bearing design on both ends. Due to the sturdy and flexible bearings, you can quickly fix and install the cylinder on your tractors or min excavators. Joint Bearing Width: 2". Thickness 0.8". Durable enough to hold a lot of force..
  • With Check Valve & Fully Tested: The well-assembled and thoroughly tested tractor top link hydraulic cylinders also come with a double pilot operated check valve to help hold the cylinder and prevent drift. The assembled inside sealing rings guard the high performance of sealing, accessi....
Check Stock

OTC HDJ5P Air / Hydraulic Service Jack - 5 Ton

  • Heavy duty hydraulic performance for garages, equipment dealers, commercial service and more.
  • Welded hydraulic pump and cylinder construction provides increased strength and leak prevention.
  • Chrome plated ram for additional rust resistance, wiper seals protect hydraulic system from contaminants and convenient foot pedal for no load lifts.
  • Front wheels with roller bearings and ball bearing - mounted rear caster wheels provide stability and easy maneuverabilty.
  • Overload and by-pass safety valves prevent use beyond the jacks rated capacity and over extension of the ram.
Check Stock

OTC UA22 22-Ton Under Axle Jack with Air Assist

  • OTC's UA22 22-Ton Under Axle Jack features air-assist operation and a self-retracting, spring return with a long, 47-1/4 in. T-handle that lets you easily position the jack under vehicles with long overhangs.
  • One pull of the handle activates the self-retracting, 4-1/2 in. stroke, 22-ton capacity ram, without having to crawl underneath the vehicle, while large rubber-tired steel wheels ensure maneuverability and movement on most types of terrain.
  • 3 inch diameter, round saddle, with center notch and 3 saddle attachments - 3/4 in. for 17-3/4 in. lift, 1-15/16 in. for 18-15/16 in. lift, and 3-7/8 in. for 20-2/3 in. lift, allowing height adjustments based on vehicle being lifted.
  • Welded hydraulic pump and cylinder construction provides increased strength and leak prevention.
  • Chrome plated ram offers additional rust resistance.
  • Wiper seals protect hydraulic system from contaminants.
  • Specifications: 22-ton capacity, 4-1/2 in. cylinder stroke, 4-1/4 in. extended screw length, 90-145 PSI, 8.27 in. to 20-2/3 in lifting range using longest saddle, 69.87 in. reach, 8.27 in. frame height, 11.73 in. x 22.63 in. footprint, 100 lb. weight.
Check Stock

Baileigh B-CARTX2 Hydraulic Lift Cart 660 Lb Capacity

  • DUAL-SCISSOR SYSTEM: 32" x 20" table raises from 14" to a maximum height of 50"..
  • 660-POUND CAPACITY: Heavy-duty hydraulic cylinder..
  • QUALITY COMPONENTS: Sealed bearings and fully-welded construction..
  • EASY MOBILITY: Rolling swivel casters with locks..
  • CONVENIENT CONTROLS: A foot pedal raises the working platform, and a hand lever lowers it..
Check Stock

K Tool International Hydraulic Jack 22 Ton Blue Air Truck Jack HD KTI63194

  • [22-TON CAPACITY] - K tool International service jack rated to lift up to 22 tons or 44,000 lbs..
  • [TRUCK JACK SPECS] - Minimum Height: 9" (228mm).
  • [BUILT-IN BY-PASS] - K Tool truck jack includes a built-in by -pass device to protect hydraulic system from over pumping damage..
  • [BUILT-IN MUFFLER] - Provides built-in muffler to promote quiet operation, High speed turbo motor for efficient effortless operation..
  • [STRONG/DURABLE] - Heavy duty truck jack (service jack) has a welded cylinder and reservoir for added strength and durability. The truck jack also has chrome plated rams to resist rust and wear..
Check Stock

Strongway 20-Ton Hydraulic Bottle Jack with Welded Base

  • Welded base will not leak oil or other fluid.
  • Constructed of high-grade steel and built to exacting standards for quality and durability.
  • Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust.
  • Paint is oil, grease and dirt-resistant for easy cleanup.
  • High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life.
Check Stock

Strongway 12-Ton Hydraulic Bottle Jack with Welded Base

  • Welded base does not leak oil or other fluid.
  • Constructed of high-grade steel and built to exacting standards for quality and durability.
  • Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust.
  • Paint is oil, grease and dirt-resistant for easy cleanup.
  • High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life.
Check Stock

Strongway 50-Ton Hydraulic Bottle Jack with Welded Base

  • Welded base does not leak oil or other fluid.
  • Constructed of high-grade steel and built to exacting standards for quality and durability.
  • Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust.
  • Paint is oil, grease and dirt-resistant for easy cleanup.
  • High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life.
Check Stock

Strongway 4-Ton Hydraulic Bottle Jack with Welded Base

  • Welded base will not leak oil or other fluid.
  • Constructed of high-grade steel and built to exacting standards for quality and durability.
  • Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust.
  • Paint is oil, grease and dirt-resistant for easy cleanup.
  • High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life.
Check Stock

WEN WT4030 Cross Tube Hydraulic Cylinder with 4 Bore and 30-inch Stroke, Black

  • Double-acting steel-welded design creates pressure up to 3000 PSI.
  • Features a 4-inch bore, a 30-inch stroke, and a 2-inch rod diameter.
  • SAE-8 port (3/4 inch-16UNF) connects easily to your hydraulic hose.
  • Retracted 40-inch cylinder extends out to 70 inches in length.
  • Includes a polished chrome-plated rod, and a two-year warranty.
Check Stock

WEN WT4008 Cross Tube Hydraulic Cylinder with 4 Bore and 8-inch Stroke, Black

  • Double-acting steel-welded design creates pressure up to 3000 PSI.
  • Features a 4-inch bore, a 8-inch stroke, and a 2-inch rod diameter.
  • SAE-8 port (3/4 inch-16UNF) connects easily to your hydraulic hose.
  • Retracted 18-inch cylinder extends out to 26 inches in length.
  • Includes a polished chrome-plated rod, and a two-year warranty.
Check Stock

Strongway 8-Ton Hydraulic Bottle Jack with Welded Base

  • Welded base does not leak oil or other fluids.
  • Constructed of high-grade steel and built to exacting standards for quality and durability.
  • Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust.
  • Paint is oil, grease and dirt-resistant for easy cleanup.
  • High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, which helps to reduce wear and extend service life.
Check Stock