Reviews Welded Connection Pressure Relief Valve

Watts Tankless Water Heater Service Valve Kit

  • TANKLESS WATER HEATER VALVE KIT: Watts LFTWH-FT-HCN service valve kit for tankless water heater valves simplify the installation, maintenance and operation of tankless water heaters..
  • SERVICE VALVE KIT FOR TANKLESS WATER HEATER: The tankless water heater service valve kit replaces up to 18 fittings and 16 connections used in typical tankless water heater installations, color-coded tee handle. Optional pressure relief and check valve..
  • MULTIPLE CONNECTION VALVE KIT: They are available in two valve sets or as a single valve with female threaded, union or quick-connect end options. The service valve kits are available with or without a relief valve. Facilitate service and maintenance with cold water inlet and hot water outlet valves certified to NSF/ANSI 61..
  • LEAD FREE VALVE KIT: The wetted surface of our Lead Free products contacted by consumable water contain less than one quarter of one percent (0.25 percent) of lead by weight..
  • WATER SERVICE VALVE KIT: Purge/drain ports allow regular cleaning to remove scale build-up. The kit includes LF4L - Lead free poppet type pressure relief valves for protection against excessive pressure and LFTWH - Lead Free Tankless Water Heater Valves..
Check Stock

Unisex Adult Steampunk Gas Mask Costume Accessory, Gold, One Size

  • TANKLESS WATER HEATER VALVE KIT: Watts LFTWH-FT-HCN service valve kit for tankless water heater valves simplify the installation, maintenance and operation of tankless water heaters..
  • SERVICE VALVE KIT FOR TANKLESS WATER HEATER: The tankless water heater service valve kit replaces up to 18 fittings and 16 connections used in typical tankless water heater installations, color-coded tee handle. Optional pressure relief and check valve..
  • MULTIPLE CONNECTION VALVE KIT: They are available in two valve sets or as a single valve with female threaded, union or quick-connect end options. The service valve kits are available with or without a relief valve. Facilitate service and maintenance with cold water inlet and hot water outlet valves certified to NSF/ANSI 61..
  • LEAD FREE VALVE KIT: The wetted surface of our Lead Free products contacted by consumable water contain less than one quarter of one percent (0.25 percent) of lead by weight..
  • WATER SERVICE VALVE KIT: Purge/drain ports allow regular cleaning to remove scale build-up. The kit includes LF4L - Lead free poppet type pressure relief valves for protection against excessive pressure and LFTWH - Lead Free Tankless Water Heater Valves..
Check Stock

LF10-4H Pressure Switch, 4 Port Air Compressor Pressure Switch Replacement Control NPT1/4 95-125 PSI 20A

  • ✅ [Size]--6.3 mm unloader valve connection, 1/4 inch NPT Female connection. Cut off pressure 95-125 PSI.With relief valve can avoid the overload operation of the air compressor..
  • ✅ [Part number]--LF10-4H-1-NPT1/4-95-125.This pressure switch is designed for a single stage or two stage air compressor pumping up to 125 PSI..
  • ✅ [More conveient to use]--The four-port manifold gives you the option to mount in it any direction and to also have the option to add a relief valve, gauge, or multiple air outlet ports..
  • ✅ [Intelligent handle design]--The handle can be used to cut off air compressor and 4-port base simply the mountion of exhaust valve and pressure gauge.This switch features a built-in On / Off metal lever and also a unloader located on the side of the switch..
  • ✅ [More safer to use]-- This switch comes preset to turn the compressor on at 95 psi and shut off at 125 psi..
Check Stock

Keg Regulator, Kegerator Regulator, Beer Regulator, Co2 Tank Regulator, Beer Keg Regulator, Co2 Regulator Gauge with CGA-320 Inlet, 0-60 PSI Working Pressure, 0-3000 PSI Tank Pressure By MRbrew

  • ????【No Leaks】The co2 regulator wears two tank washers to prevent leakage of the connection between the tank and the c02 regulator.
  • The relief valve on the keg regulator also has a food grade silicone washer to prevent leakage of the relief valve..
  • ????【Maintains Consistent Pressure】The lock ring can be quickly locked without re-adjustment, And maintains steady Co2 pressure with no leaks. Sturdy durable dual gauge beer regulator features a multi-stage body that gives you more precise control when making small adjustments to the output pressure..
  • ????【Easy to Adjust & Read】The kegerator regulator is easily adjustable by hand, Making adjustment effortless even at freezing temperatures. Whether it’s a bar, camping or family gathering, this beer keg regulator is your best choice..
  • ????【Relief Valve & Shut Off Valve】For added safety, The tap regulator has a manual pressure release valve that releases pressure at 55-65 PSI. There is also a shut off valve on the co2 pressure regulator that allows for instantly shutting off pressure to the keg without backing up your gas line and prevents backflow into the beer keg regulator..
  • ????【Care-free Warranty】Please feel free to contact us if any problem, we would try our best to h....
Check Stock

YAKIMA, RoadShower 7G

  • The Patented Design is built strong with welded aluminum construction and durable powder coat finish..
  • Pressurize the tank through the Schrader air valve or a garden hose..
  • Pressurize with hand or electric pump - Built-in pressure relief valve safely and automatically tops out at 55 psi (max)..
Check Stock

The ROP Shop | 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500

  • Specs - Maximum Pressure: 2400 PSI. Maximum Flow: 2.4 GPM. Maximum Pump Speed: 3400 RPM. Shaft Diameter: 7/8". 3 Bolt Pattern: 7 11/16” x 6 3/16” x 6 7/16” & 4" Center to Each Outer Hole. Maximum Water Temperature: 140° F. Inlet Connection Type: Standard Garden Hose. Outlet Tube Connection: 22mm Male. Refer to images 2 and 3 for more information.
  • Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube (come installed).
  • This pump is for vertical gas engine driven units. In some instances, the pump may need to be removed to change engine oil. The mounting flange provides a convenient connection to most 7/8” diameter shaft vertical gas engines in 4.5-7 HP. The pump has a hole in the leg for draining the engine oil. The pump includes a built-in pressure control valve, downstream chemical injection system and thermal relief valve.
  • This has the outlet facing the front. Some specific pressure washers may require longer bolts and spacers to ....
Check Stock

Brio B.P.A. Free 5 Gallon Plastic Crown Cap Reusable Water Bottle Container

  • This non-portable water expansion tank is for closed loop hydronic heating system piping to control the thermal expansion of hot water and maintain system pressure below the relief sett of the relief valve.
  • The carbon steel tank is pre-charged at 12 psi, has a 4.5 gallon volume, and features a durable expansion membrane preventing minimizes loss of the air change and ensures long and trouble-free life for the system.
  • Made of carbon steel with epoxy finish, mounts to supply piping, with 1/2 inch MNPT system connection and .302-32 inch charging valve connection for on-site charging of the tank.
  • Maximum pressure 60 psi and can be used in residential or commercial hydronic heating systems.
  • Use in tandem with your hot water heater to absorb increased water volume ensuring long and trouble-free life for the system.
Check Stock

Clscea Aquarium CO2 Regulator Dual Gauge with Bubble Counter and Solenoid Valve, Single Stage

  • [Hold Constant Pressure & No Leak]Hilangsan two-stage kegerator co2 regulator reduces the high pressure in two steps for maintaining the constant output pressure. Heavy-duty chrome-plated brass construction would last for years with no rust and no leakage. A professional CO2 regulator for draft beer dispenser systems..
  • [Easy-to-Adjust Knob & Safety Relief Valve]Knurled adjustment knobs of the co2 beer regulator are easy to grip and turn for precise fine-tuning CO2 levels from 0-60psi. The shut-off valve can be closed only by turning 90°, no need to turn multiple turns. The pressure relief valve will automatically release the keg pressure at 50psi pressure for safety (not a leak)..
  • [Precise and Clear Gauges]The top two gauges(0-60psi) have an appropriate scale range to allow for precise fine-tuning of keg pressure while avoiding damage to the gauges from overpressure. The left gauge (0-3000psi) is convenient for monitoring the amount of CO2 in the tank at any time. The shockproof case can protect the gauges, making the gauges more durable..
  • [Dual Body CO2 Regulator]The co2 keg regulator has 2 separate output pressur....
Check Stock

Uniweld Products RHP1500 Uni-Weld Nitrogen Regulator 1/4 Fnpt

  • CGA580 Inlet Connection, 1/4 Inch Male Flare Outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots.
  • Nitrogen Regulator, Delivery Pressure 0-400 PSI.
  • Durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system).
  • Large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling.
Check Stock

Dbgogo CGA-320 Keg CO2 Regulator, Brewing Dual Stage Gauge Beer Kegerator Pressure Regulator with 1/4” & 5/16” Quick Disconnect Barb Connectors and Safety Pressure Relief Valve for Co2 Cylinder Tank

  • ...avy-duty forged brass body for sturdiness and durability. CGA-320 co2 regulator fits all standard co2 cylinders tanks with CGA-320 outlet. CGA320 cylinder fitting features a hexagonal design for easy tightening with an adjustable wrench. just put a white sealing washer into gas cylinder connector, which can prevent connection between co2 cylinder and keg regulator from leaking..
  • Stable, easy-to-read, drift-free dual gauge: Dbgogo co2 tank regulator features dual pressure gauges, 0-60 psi output pressure gauge displays amount of co2 pressure provided to beer keg, 0-3000 psi cylinder pressure gauge displays amount of co2 pressure left in cylinder. dual pressure gauge regulator can accurately and stably monitor working pressure in home-brewed beer carbonation system at any time, and reading is simple, which is very suitable for brewing carbonated beverages, beer and tea..
  • Easy to manually adjust system pressure, locking ring maintains stable pressure setting: co2 regulator has 2 manual adjustment knobs to control entire brewing system pressure. you can set beer keg pressure by slowly turning pressure adjustment knob in “+” direction. turn locking ring behind pressure adjustment knob to secure pressure adjustment knob and maintain a stable pressure set....
Check Stock

Watts Brass & Tubular 374A 3/4 Boiler Relief Valve

  • 1/4" male NPT 175 PSI Industrial air compressor / tank pressure safety relief valve..
  • Also known as a "Pop Off" or "Blow Off" valve..
  • This relief valve is manufactured in the United States and is stamped with "UV" & "NB" symbols..
  • The relief pressure of this valve is set at 175 PSI and is accurate within + or - 3% of the set pressure..
  • Features a silicone rubber soft seat relief valve to prevent leaks.
Check Stock

PLUMB eeze Brass Pressure Relief Valve Set @ 75 PSI for Water Well Pressure Tank, 3/4"

  • PRESSURE RELIEF VALVE – 3/4″ Line Connection, 75 PSI.
  • FOR COLD WATER ONLY – Pressure relief valves are recommended for all cold water system installations..
  • PROTECTION – protect against damage to plumbing system, piping and pressure tanks. “.
  • DIMENSIONS – 3/4″” Male thread for screwing into tank/tank tee. 1/2″” female thread for accepting plumbing running to drain. “.
  • LEAD FREE – Made from lead-free brass..
Check Stock

BETOOLL Nitrogen Regulator with 0-400 PSI Delivery Pressure Equipment Brass Inlet Outlet Connection Gauges

  • CGA580 Inlet Connection, 1/4 Inch Male Flare Outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots.
  • Nitrogen Regulator, Delivery Pressure 0-4000 PSI..
  • Durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system).
  • Large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling.
Check Stock