Reviews Weld on Camber Plates

YLDEE Magnetic Camber Caster and King Pin Gauge (Red)

  • Robust magnetic gauge mounts onto wheel/hub for quick accurate measurement of camber,castor angle kingpin inclination.
  • Camber gauge with fixed graduation from +5 to -5.
  • Adjustable caster gauge graduated +11 to -3.
  • Kingpin gauge graduated from 0 to 14 left to right.
  • Very solid, well made. Magnets are very strong, reliable and accurate! Suitable for vehicles fitted with steel wheels. To be used in conjunction with steering turntables and rear wheel level plates..
  • Supplied in tough composite carry-case. Suitable case with enough padding will protect the Camber Castor Gauge very well..
Check Stock

Yonaka Compatible with Honda Accord 2013-2017 Spec 2 Full Coilovers Suspension Shocks Springs Struts

  • Fully threaded dual tube advanced shock absorber.
  • Adjustable camber plates (3 degrees camber adjustment).
Check Stock

Powerblanket Cure PRO 3' x 4' Heated Concrete Curing Blanket - Rugged Industrial Pro Model

  • Fit **Please measure your bucket before ordering to ensure a proper match. A mismatched thumb will result in damage to your backhoe, as larger backhoes have more bucket force. For example: if you mount a 25” thumb on a hoe that requires a 31” one, you will probably bend or break your equipment. Make sure that this thumb is at least the length of your bucket when measured from boom to the teeth or the warranty may voided if damage occurs.**.
  • Easy to assemble and weld Please measure your bucket before ordering Plasma cut for tight tolerances High quality steel Adjustable teeth bars Easily removable.
  • Condition: Brand new, Color: Black, Material: Steel, 5/8" tine plates, and 3/8" body assembly plates , Tine length: 32".
  • The 36" weld on backhoe thumb from us is perfect for anyone that needs to add a high quality thumb to their excavator. Simply weld it to the boom and its ready for work. When not in use, you can just remove the teeth bars and store them away. Made from heavy duty 5/8" thick steel plates, this pro-duty implement is ready for just about any job..
Check Stock

MadJax King XD 4" Golf Cart Lift Kit for Yamaha G29/Drive (2007-2016) and Drive2 (2017-Up) with Solid Axle Rear Suspension + 30 lb Counterweight Kit

  • [Innovative Design] The Kingpin design replaces the traditional heim joints providing a simpler and more durable 4" lift kit.
  • [Made to Fit] Designed specifically for Yamaha G29/Drive (2007-2016) and Drive2 (2017-Up) Models with Solid/Fixed Rear Suspension.
  • [Easy Camber/Toe Adjustment] Turnbuckle style camber adjustment makes tire setting more efficient and there's no need to remove tires for adjustment after installation.
  • [Durable Finish] Armor-coated finish with durable urethane bushings offers additional wear protection.
  • [Easy Installation] No-cut, no-weld design reduces installation time by up to 25%, with easy to follow instructions included.
Check Stock

Tenhulzen Automotive - Digital Hands Free Camber/Caster Gauge, 0.1 Degrees Accuracy, No Turn Plates Needed!

  • Measure Camber and Caster at the track or in your garage..
  • Camber measurements accurate to within 0.1 degrees..
  • Measures Caster WITHOUT the need for expensive turn plates..
  • Digital readout can be calibrated for non-level surfaces in a matter of seconds..
Check Stock

Longacre® Racing 79501 Aluminum Toe-In Plates w/Magnets

  • These plates are the quickest and simplest way to check toe-in - any contact with other cars or retaining walls is likely to change the toe setting.
  • Easy to use - rest one of these plates against the tire on each side and measure toe directly using the 2 tape measures (included).
  • Get the most accurate reading - always remember to turn wheels so they are facing straight ahead on level ground and set caster and camber first.
  • The Longacre toe-in plates formed design is rigid for accuracy and stays put against the tire while the magnets hold the tape in place.
  • The dimensions of the Longacre toe-in plates are 23-1/2" x 9" and are sold as a pair with two 3/4" tapes that feature 1/32" increments.
Check Stock

Tenhulzen Automotive 2-Wheel Alignment Tool - All-in-one Camber/Caster/Toe Plates - Made in USA

  • All-In-One Tool Measures Camber, Caster, AND Toe!.
  • Patent Pending wheel stand-offs provide unparalleled accuracy..
  • Camber Accurate to Within 0.1 Degrees (much better than a bubble gauge)..
  • Expensive Turn Plates Are NOT Needed for Caster Measurment..
  • Detailed, Step by Step Video Instructions..
Check Stock

Titan Attachments DIY 24' Weld On Backhoe Thumb Hoe Clamp .5' Steel Plate Assembly CNC Plasma Cut

  • Easy to assemble and weld. Plasma cut for tight tolerances.
  • Includes: 2 jaw plates, 1 gusset plate, 1 backplate, 2 side plates, 1 hinge tube, 3 clevis pins with keeper pins.
  • 1/2" Teeth Bars, and 3/8" body assembly plates Comes unpainted and ready to weld.
  • Please measure your bucket before ordering to ensure a proper match..
Check Stock

Longacre® 52-79505 Deluxe Toe Plates (pair)

  • Consistent results - the thicker material and deeper bend gives you more rigid plates for better accuracy with your toe measurements.
  • The Longacre deluxe toe-in plates feature a higher kick-out bottom that holds the plate against the wheel better, making them even easier to use.
  • Get the job done fast and with less stress - the built in magnets hold the tapes in place while you work, making the job easy for one person.
  • The Longacre deluxe toe-in plates are perfect for cars with high camber left front wheels, such as bump stop cars.
  • Longacre deluxe toe-in plates will help keep your race car at the front of the pack – this set includes two deluxe toe-in plates and two tire tapes.
Check Stock

GTW Club Car Precedent Golf Cart Lift Kit | 6" Double A-Arm (Fits 2004 & Up Gas or Electric Models)

  • [Built to Last] The GTW A-Arm lift kit is made from durable steel and designed to lengthen the wheelbase on your golf cart.
  • [Easy Installation] Our No Cutting and No Weld Design makes for an easy bolt on application.
  • [Adjustable Camber & Toe] Complete with pivot point grease fittings for easy maintenance.
  • [A Better Ride] The lift kit Increases suspension travel providing a smoother off-road experience.
  • [Sleek & Strong] high gloss black powder coated finish and Durable urethane bushings.
Check Stock

GTW 6" Double A-Arm Golf Cart Lift Kit for Club Car DS Gas/Electric 1982-2003.5

  • [Easy Installation] Our No Cutting and No Weld Design makes for an easy bolt on application | Easy to Follow FULL COLOR Instructions Included.
  • [Adjustable Camber & Toe] Complete with pivot point grease fittings for easy maintenance.
  • [A Better Ride] The lift kit Increases suspension travel providing a smoother off-road experience | 6 inch Lift Allows up to 23" Tall Tires.
  • [Sleek & Strong] Durable urethane bushing with a high gloss black powder coated finish.
  • [Important Note] Must have Metal Steel Dust Covers on Front Hub to Fit.
  • if cart has plastic dust covers, alternate lift kit is needed.
Check Stock

91018040 Engine Swap Weld-In Motor Mount Kit Compatible with Chevy Small & Big Block SBC BBC

  • 【COMPATIBILITY】 Universal engine mount compatible with Chevrolet Small & Big Block 350 396 454 Engine. SBC/BBC and 4.3L V6 engines..
  • 【FUNCTION】These brackets allow a LS series engine to be bolted into a vehicle that originally had a small block chevy engine with your existing mounts..
  • 【MATERIAL】Features polyurethane bushing for vibration free performance and long bushing life.
  • 【PERFORMANCE】4 9/5" tall weld on steel frame plates allow for customization to your specific chassis.
  • 【PACKAGE CONTENTS】2x Weld-In Motor Mount,2x Blots,4x Frame Plates .Please contact us if the package you received is missing parts..
Check Stock

Camber Gauge Digital Wheel Alignment Tool -90° to +90° Wide Range Wheel Alignment & Balancing Tools Accurate Caster Camber Gauge with Digital Display & Powerful Magnet & Positioning Bubble & Reset Key

  • 【Professional Digital Caster Camber Gauge】The camber gauge is used to measure the camber and caster angles of wheels or brake discs.Camber gauge allows you to restore the strut to original camber position after disassembling and reassembling the suspension,or to check the camber change before reinstalling. It can help you adjust camber and caster to maintain correct wheel alignment, reduce tire wear, and increase the speed of your car. It can also be used to adjust the levers of the rear wheels..
  • 【Easy-to-read Digital LCD Display & ±90° Wide Range Measurement】Wheel alignment & balancing tool is equipped with a clear digital display,allowing you to quickly read the caster and camber angles.You can check and adjust the castor and camber angles at a glance.This camber gauge also has a backlight for use in dark areas.The camber gauge has an ultra-wide measuring angle range from -90 to +90 degrees.It is suitable for wheel alignment of all vehicles,such as cars, motorcycles, trucks, vans, etc..
  • 【Powerful Magnet&Positioning Bubble Design for Accurate Measurement】There is a magnet with strong magnetic attraction at the bottom of the camber gauge,which can be easily attached to various magnetic surfaces.The magnet attached area of the ....
Check Stock