Reviews Weld Screw

3/4" Bore Weld on Hub for X Series (Diameter 2" w/ 3/16" Keyway) Farmer Bob's Parts WSH30012

  • 3/4" X-Series Weld on Hub Round Bore w/ Keyway Set Screw Meets ASTM/ANSI Standards B29.62 Fits X Series Weld Sprocket with 2" Diameter Hub for Sprocket Keyway 3/8 X 3/16".
  • 00030012, 20030012, 971-20030012, WSH30012, X3/4.
Check Stock

Stark USA 55009 Spot Welder 1/8\ 120V Electric Single Phase Portable Handheld Welding Tip Gun

  • Single Phase Design - Easily weld together different types of materials with the single phase design. Simple welding mechanism allows you to quickly insert the materials and press to weld.
  • Replacement Tips - Spot welder comes with extra pair of welding tips for multiple uses. Simply twist the tips off when they are ready to be replaced and screw on the new one.
  • Durable Welding Tips - Welding tips are constructed from high quality steel to get the perfect weld for materials that have a thickness.
  • Simple Lever Function - To perform welding applications, simply apply pressure and press down on the lever.
  • Portable Design Machine - The attached handle allows you to quickly transport your spot welder to different job locations quickly.
Check Stock

Weld on Filler Cap, KIMISS Aluminum Alloy Weld On Oil Tank Filler Neck with Cap Filler Neck 1.5'' 1 1/2'' OD for Fuel Tanks Weld In Fuel Cell Cap Weld On Fuel Cap Fuel Filler Neck Aluminum Fill Cap

  • ...er is suitable for oil tank, fuel tank, water tank, dry tank, etc. It is a high-quality, quality-guaranteed auto parts, and Fuel Filler Neck And Cap is your best purchase choice..
  • Product function: Weld On Fill Cap Fuel Filler Neck has smooth finished design, come with a O-shaped sealing ring and a natural aluminium screw on cap. Weld on Cap meets aviation hose fitting requirements, precision machine tool to precision tolerance..
  • High-Quality Material: 2 Inch Fuel Filler Neck Aluminum Fill Cap using premium aluminium alloy materials, which is maximize the durability, reliability, wear resistance, and have long service life. It is more reliable and safer than other similar products. And it will be your Ideal choice..
  • Easy to Install: The outstanding advantage of our Aluminum Weld On Cap Weld in Fuel Cell Cap is that it is simple assembly and disassembly, convenient and practical, you can directly replace the broken or shabby one, helping you save a lot of time and energy. If you want more comfortable for your beloved car, our Weld on Fuel Cap is the best choice for you..
  • Strict quality control: Each of our Weld On Filler Cap are manufactured in strict accordance with standard specifications. We have a set of quality control system to ensure that the produ....
Check Stock

J-B Weld 8257 KwikWood Wood Repair Epoxy Putty Stick - 1 oz. - 2 Pack

  • JB KWIKWOOD: is a hand-mixable epoxy putty, formulated to repair and rebuild wood. After mixing, it cures to the same density as wood and becomes an integral part of the repair..
  • THE ORIGINAL COLD WELD: JB Weld was developed as an alternative to torch welding. Designed to be effective in extreme environments, once it sets, it creates a permanent bond stronger than steel..
  • SIMPLE TO USE: Contains no solvents, will not rot, shrink, crack or pull away. KwikWood has a 15-25 minute work life. After 60 minutes, it can be machined, drilled, tapped, sanded, filed and painted..
  • VERSATILE & DEPENDABLE: Ideal for dry rot, knot holes, window & door frames, screw holes, insect damage, furniture and carvings, gouges & cracks and PVC trim board..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B. Our heavy duty adhesives repair & restore it right the first time. JB Weld delivers the legendary performance of the World's Strongest Bond..
Check Stock

J-B Weld 8257 KwikWood Wood Repair Epoxy Putty Stick - 1 oz. (New Version)

  • JB KWIKWOOD: is a hand-mixable epoxy putty, formulated to repair and rebuild wood. After mixing, it cures to the same density as wood and becomes an integral part of the repair..
  • THE ORIGINAL COLD WELD: JB Weld was developed as an alternative to torch welding. Designed to be effective in extreme environments, once it sets, it creates a permanent bond stronger than steel..
  • SIMPLE TO USE: Contains no solvents, will not rot, shrink, crack or pull away. KwikWood has a 15-25 minute work life. After 60 minutes, it can be machined, drilled, tapped, sanded, filed and painted..
  • VERSATILE & DEPENDABLE: Ideal for dry rot, knot holes, window & door frames, screw holes, insect damage, furniture and carvings, gouges & cracks and PVC trim board..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B. Our heavy duty adhesives repair & restore it right the first time. JB Weld delivers the legendary performance of the World's Strongest Bond..
Check Stock

2 Pieces 3 Heavy Duty Weldable Hinges 12 Ga Welding Long Lasting Steel Butt Hinge Corrosion and Rust Resistant Metal Weld on Hinges for Trailer Door Heavy Gates

  • What You Will Get: you will receive 2 pieces of weldable hinges, the size of them is about 3 x 3 inches, and the thickness is about 12 Ga, the weight is about 0.34 lb, besides, each hinge can bear about 25 lb of weight, you can choose them according to your needs.
  • Strong and Reliable: this weldable metal hinge is made of steel, strong and reliable, and it is with nice bearing capacity, suitable for heavy gates and doors, it is not easy to break, you can use the hinge for a long time.
  • Easy to Install: these heavy duty gate hinges do not need to be fixed with screws or other fasteners, only need to be welded at the place you want.
  • These heavy duty gate hinges are dark gray and don't have coating, they can be painted to match the metal surface to which they are attached.
  • Using Method: you can weld the metal gate hinges directly to the door, or you can drill holes and screw them on the doors (screw is not included), you can choose the installation method according to your needs.
  • Applicable Occasion: you can take these weld on steel hinges for home door use, and they are also suitable for yard gate, trailer and other occasions, strong and safe to use.
Check Stock

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock

Upower 2.5 inlet 4.5 outlet Blue Burnt Exhaust Tip Carbon Fiber Stainless Steel Exhaust Muffler Tip Tail Pipe 2.5 to 4.5 inch 6.7 Long Bolt-on for Diesel Trucks Car

  • Design: Bolt On Or Weld as your like- Dry Carbon Fiber Sleeve - Angle Cut..
  • Material : Made of high quality stainless steel with Carbon Fiber Cover. Durable and Anti-corrosive,protect the original tips from Sun and Rain,avoid....
  • Wide Application: Universal fits 2.5" Inlet diesel trucks pickup car exhaust tail pipe..
  • Easy Installation: No weld and drill needed. Just fix the screw to the appropriate location of tailpipe by Wrench..
Check Stock

Grog Squeezer Marker 10 FMP (Mini) (Neon Green)

  • 3/4-inch cap dauber fits Weld-On Primer and Solvent quart cans.
  • Dauber is conveniently attached to the bottom of the screw cap for application of primer and cement.
  • Cap creates a tight seal, preventing primers and solvent cements from drying out.
  • Practical design ensures you always have an applicator on hand.
Check Stock

Pro Series by HHIP 8017-0100 Screwdriver Type Ball Plunger, M4 x 0.7

  • SBDs (Pack of 4) 'POP' Pull Pin 1" Diameter x 1-1/2" Length Weld ON Steel Barrel | 1/2" Diameter Spring Loaded Zinc Plated Steel Plunger | Plastic T HANDLE Knob | Knurled Round Nut w/Grub screw Lock..
Check Stock

KINSPORY 10Pc Colourful Pig Nose Shape Children Rock Climbing Holds Indoor Outdoor Kids Playground Build with Two Blue Handles - Mounting Hardware Kit Included

  • Used for any jungle gym accessories, wooden playset, playground.
  • Made with durable weather resistant plastic construction, each Pig rocks has 2 mounting holes for a secure attachment to the climbing set.
  • Rock climbing will motivate children to exercise, improve their agility, endurance, flexibility, and strengthen the balance of the body, just have fun with our pig climbing holds..
  • LIFETIME WARRANTY – If these climbing wall holds give you any trouble, ever, we will make it right. That is it. We stand behind our quality and customer service. Know your rock wall will be there to entertain kids for years to come..
  • Package Included: Pig Stones(10 set), Cap Screw(2 per hold) , Weld nuts(1 per Screw), Flat Washer(2 per Screw), Allen Wrench, Two Handles.
Check Stock

Weld On Grab Chain Hook G70 3/8\ Weld On Chain Grab Hooks Bucket Flatbed Trailer Wrecker Tow Tie Down Forged Steel Working Load Limit: 6600 lbs

  • Weld-on Type, Grab, Hook. Working load limit 6600 lb.. Size 3/8 inch, Grade 70, for use with 3/8 in chain.
  • The best hook-used for welding on the tractor bucket, it is very suitable for any field of use, and can be used with the following statements: weld on hooks weld chain hook weld on clevis weld-on clevis grab chain hooks weld tow hook weld hooks for buckets forks weld hook3/8 weld hook grab hooks 3/8weld on grab hook weldable hooks weldon hooks weld clevis hook 3/8weld on chain hooks.
  • Grab hooks work well with chains and ratchet binders for securing your load or for tow anchors..
  • Material: Forged Steel，Package Includes:4pcs hooks.
  • Note: Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. We make every effort to provide customers with satisfactory service. Feel free contact us by emails if you have any problems..
Check Stock

ABN Butt Welding Clamps - 8 Piece Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • [Perfectly Align Panels] Use the ABN Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • [Fits your Project] Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • [Easy to Use] Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 8 clamps for larger projects, then joint weld between them.
  • [Built to Last] Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • [Contents] Welding accessories set includes 8 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock