Spot Weld Cutter Set,13 Pcs 3/8" Rotary Spot Weld Cutter Remover Drill Bits Tool and 2 Replacement Blades,Metal Hole Cutter Remover for Power Drill Spot Welding
- [Suitable]: Sharp double-sided blade, which is more effective in separating spot welded panels than panel cutting machines. The spot-welded panel or metal plate can be perfectly removed without deforming the metal or damaging the underlying panel. Suitable for stainless steel, iron, aluminum, F.R.P, or other metal sheets.
- [Material]: The preferred material is high-quality steel, which has excellent heat resistance, high hardness, and wear resistance. The blade diameter is 3/8 inch, and the handle size is standard 1/4 inch..
- [Easy to separate] The spot welding cutter drill can easily separate the spot welding plate without distorting the metal plate. The spot-welded panel or metal plate can be perfectly removed without deforming the metal or damaging the underlying panel..
- [Package includes]: 1 drill bit with cutter, 2 guide pins., 10 x additional 3/8 "cutters. Also known as: spot weld drill bit, spot weld bit, spot weld cutter drill bit, spot weld drill cutter, spotweld drill bits, spot weld cutter, Rotary Spot Weld Cutter Sets Double Sided, Power Drill Spot Welding.
Check StockJ-B Weld 8217 TankWeld Gas Tank Repair - 1 oz.,Dark Grey
- J-B WELD TANKWELD: A hand mixable, steel reinforced two part epoxy putty stick that is formulated to repair and rebuild various holding tanks. J-B Weld TankWeld is chemical resistant against petroleum, hydraulic fluids and many other harsh chemicals once fully cured. TankWeld is certified by the NSF and is safe for contact with potable water..
- CURE AND SET TIME: After kneading the two part formula together by hand, it takes 5 minutes to set and cures in 1 hour. J-B Weld TankWeld set and cure color is dark grey..
- PRODUCT FEATURES AND STRENGTH: J-B Weld TankWeld has lap shear strength of 900 PSI. TankWeld can be molded, shaped, sanded, drilled and tapped..
- MAJOR USES: Fuel tanks, metal radiators, metal fuel or chemical tanks, metal housings and stripped threads. Surface applications include: iron, stainless steel, copper, brass, aluminum, and bronze..
- DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check StockJ-B Weld 8281 Professional Size Steel Reinforced Epoxy Twin Pack - 10 oz.
- JB WELD: Is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Perfect for household, automotive, marine and craft uses..
- THE ORIGINAL COLD WELD: JB Weld was developed as an alternative to torch welding. Designed to be effective in extreme environments, once it sets, it creates a permanent bond stronger than steel..
- EASY TO USE: Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color..
- VERSATILE & DEPENDABLE: J-B Weld has a tensile strength of 3960 PSI & sets overnight. It can withstand temperatures up to 550ºF when cured. Great for use on brick, concrete, metal, fiberglass & more..
- DO IT YOURSELF: Big or small, you can DIY it with J-B. Our heavy duty adhesives repair & restore it right the first time. JB Weld delivers the legendary performance of the World’s Strongest Bond..
Check StockJ-B Weld ClearWeld 14ml w/Static Mixer, (50114H)
- J-B Weld ClearWeld: A clear, quick setting and multipurpose two part epoxy that provides a strong and lasting bond on surfaces including metal, tile, most plastics, ceramic, glass, wood and more. J-B Weld ClearWeld comes in a syringe allowing for an easy 1:1 mix ratio. The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses!.
- Cure and Set Time: After mixing the two part formula with the included mixing tray and stir stick, ClearWeld takes 5 minutes to set and 1 hour to cure. J-B Weld ClearWeld set and cure color is clear..
- Strength: J-B Weld ClearWeld has tensile strength of 3900 PSI..
- Surface Applications: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile, Fiberglass and Glass..
- Do it Yourself: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check StockJ-B Weld ClearWeld 5 Minute Epoxy, Clear, Syringe, 2 Pack, 50112-2
- J-B Weld ClearWeld: A clear, quick setting and multipurpose two part epoxy that provides a strong and lasting bond on surfaces including metal, tile, most plastics, ceramic, glass, wood and more. J-B Weld ClearWeld comes in a syringe allowing for an easy 1:1 mix ratio. The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses.
- Cure and Set Time: After mixing the two part formula with the included mixing tray and stir stick, ClearWeld takes 5 minutes to set and 1 hour to cure. J-B Weld ClearWeld set and cure color is clear..
- Strength: J-B Weld ClearWeld has tensile strength of 3900 PSI..
- Surface Applications: Metal, Most Plastics, PVC, Wood, Concrete, Ceramic & Tile, Fiberglass and Glass..
- Do it Yourself: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check StockPlast-aid Multipurpose Repair Plastic - 6 oz Kit
- J-B WELD MARINEWELD: A two-part epoxy cold weld system that provides strong, lasting repairs to multiple surfaces. Perfect for all DIY marine and....
- CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 16-24 hours to cure. Once cured J-B Weld MarineWeld can be....
- VERSATILE AND DEPENDABLE: J-B Weld MarineWeld is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees....
- SURFACE APPLICATIONS: Aluminum, Fiberglass, Metal, Plastic/Composite, Wood..
- DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld....
Check StockEEEkit 15 Pack Rotary Spot Weld Cutter Sets Double Sided, 3/8" HSS Spot Weld Cutter Remover Drill Bits Hex Sheet Metal Hole Cutter Remover for Power Drill Spot Welding
- SPOT WELD CUTTER TOOL: It is easy to replace when the electric drill blades begin to dull. The package includes a 15 PCS 3/8 inches spot weld cutter..
- WEAR RESISTANCE: Made of high-speed steel material, high hardness, and wear-resistant. The Center pin on the bit is spring-loaded. Sharp double-sided blades for high efficiency..
- EASILY SEPARATION: Spot weld cutter drill bit for easily separate spot-welded panels without distorting the sheet metal. Separate Spot-welded sheet metal, panel, etc, and cut small access holes..
- DOUBLE-SIDED WELD CUTTER: This weld cutter is a double-sided rotary cutter blade that separates spot-welded panels more effectively than a panel cutter. Double-sided 3/8 inch rotary blade and Hex Shank fit most drills..
- APPLICATION: Suitable for thin stainless steel sheets, iron sheets, aluminum sheets, F.R.P, or other thin metal sheets..
Check StockJ-B Weld 50112 ClearWeld 5 Minute Set Epoxy Syringe - Clear - 25 ml
- J-B Weld Clearweld: A Clear, Quick Setting And Multipurpose Two Part Epoxy That Provides A Strong And Lasting Bond On Surfaces Including Metal, Tile, Most Plastics, Ceramic, Glass, Wood And More. J-B Weld Clearweld Comes In A Syringe Allowing For An Easy 1:1 Mix Ratio. The Unique Syringe Has A Re-Sealable Cap That Prevents Drying Out And Leaking, Allowing For Multiple Uses.
- Cure And Set Time: After Mixing The Two Part Formula With The Included Mixing Tray And Stir Stick, Clearweld Takes 5 Minutes To Set And 1 Hour To Cure. J-B Weld Clearweld Set And Cure Color Is Clear.
- Strength: J-B Weld Clearweld Has Tensile Strength Of 3900 Psi.
- Surface Applications: Metal, Most Plastics, Pvc, Wood, Concrete, Ceramic & Tile, Fiberglass And Glass.
Check StockJ-B Weld Original Epoxy, Steel Reinforced Epoxy, High Strength - 2 Pack, Dark Grey (8265S-2)
- J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces. Perfect for DIY household, automotive, marine, craft repair and much more..
- CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey..
- VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid..
- SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass..
- DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check StockJ-B Weld 8272 MarineWeld Marine Epoxy - 2 oz.
- J-B WELD MARINEWELD: A two-part epoxy cold weld system that provides strong, lasting repairs to multiple surfaces. Perfect for all DIY marine and watercraft repairs..
- CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 16-24 hours to cure. Once cured J-B Weld MarineWeld can be tapped, filled, sanded, molded and drilled. J-B Weld MarineWeld’s set and cure color is dark grey..
- VERSATILE AND DEPENDABLE: J-B Weld MarineWeld is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, MarineWeld is waterproof and resistant to petroleum, chemical and acid. It retains strength above & below water..
- SURFACE APPLICATIONS: Aluminum, Fiberglass, Metal, Plastic/Composite, Wood..
- DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check StockJ-B Weld 50101 MinuteWeld Instant-Setting Epoxy Syringe - Dries Clear - 25ml 2
- J-B WELD ORIGINAL PRO SIZE: Professional 5 OZ Tubes of the Original Cold Weld two-part epoxy system that was designed as an alternative to torch....
- CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured J-B Weld Original can be....
- VERSATILE AND DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees....
- SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass..
- DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld....
Check StockJ-B Weld 8265S Original Cold-Weld Steel Reinforced Epoxy - 2 oz.
- VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid..
- SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass..
- DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
- Will set in 4-6 hours, and cure in 16-24 hours.
- Waterproof, petroleum, chemical, and acid resistant when fully cured.
- Can be drilled, tapped, machined, filed, sanded and painted.
- Stong and nontoxic after it has set and temperature resistant up to 500F.
Check StockKUNWU Stainless Steel TIG Welding Rods ER309L 1/16" x 36" (5 Lb) Used to Weld Type 304 and Similar or Dissimilar Base Metals
- Occasionally used to weld Type 304 and similar base metals where severe corrosion conditions exist requiring higher alloy weld metal.
- Also used in dissimilar metal welds, welding of dissimilar steels or overlaying unalloyed structural steels.
- Low carbon content (0.03 percent maximum) increase weld metal resistance to intergranular corrosion.
- Easily use in welding of kitchen, food equipment, furnace, motorbike and exhaust system.
- Straight length of 36 inch packaged in a PVC tube (random color).
Check Stock