Reviews Weld Hardness Testing

EEEkit 15 Pack Rotary Spot Weld Cutter Sets Double Sided, 3/8" HSS Spot Weld Cutter Remover Drill Bits Hex Sheet Metal Hole Cutter Remover for Power Drill Spot Welding

  • SPOT WELD CUTTER TOOL: It is easy to replace when the electric drill blades begin to dull. The package includes a 15 PCS 3/8 inches spot weld cutter..
  • WEAR RESISTANCE: Made of high-speed steel material, high hardness, and wear-resistant. The Center pin on the bit is spring-loaded. Sharp double-sided blades for high efficiency..
  • EASILY SEPARATION: Spot weld cutter drill bit for easily separate spot-welded panels without distorting the sheet metal. Separate Spot-welded sheet metal, panel, etc, and cut small access holes..
  • DOUBLE-SIDED WELD CUTTER: This weld cutter is a double-sided rotary cutter blade that separates spot-welded panels more effectively than a panel cutter. Double-sided 3/8 inch rotary blade and Hex Shank fit most drills..
  • APPLICATION: Suitable for thin stainless steel sheets, iron sheets, aluminum sheets, F.R.P, or other thin metal sheets..
Check Stock

Spot Weld Cutter Set，13 Pcs 3/8" Rotary Spot Weld Cutter Remover Drill Bits Tool and 2 Replacement Blades,Metal Hole Cutter Remover for Power Drill Spot Welding

  • ...etal plate can be perfectly removed without deforming the metal or damaging the underlying panel. Suitable for stainless steel, iron, aluminum, F.R.P, or other metal sheets.
  • [Material]: The preferred material is high-quality steel, which has excellent heat resistance, high hardness, and wear resistance. The blade diameter is 3/8 inch, and the handle size is standard 1/4 inch..
  • [Easy to separate] The spot welding cutter drill can easily separate the spot welding plate without distorting the metal plate. The spot-welded panel or metal plate can be perfectly removed without deforming the metal or damaging the underlying panel..
  • [Package includes]: 1 drill bit with cutter, 2 guide pins., 10 x additional 3/8 "cutters. Also known as: spot weld drill bit, spot weld bit, spot weld cutter drill bit, spot weld drill cutter, spotweld drill bits, spot weld cutter, Rotary Spot Weld Cutter Sets Double Sided, Power Drill Spot Welding.
  • [Quality Service] If you have any doubts or dissatisfaction after receiving the product, please contact us immediately, and we will provide you with a satisfac....
Check Stock

5\ Weldable Barrel Hinges Heavy Duty Bullet Hinges Weld on Steel, Detachable Ball Bearing Gate Door Hinges for Metal Swing Door,Trailer Ramp Gate,3/4\ Dia Pin,600 lbs Load Capacity(2Pcs)

  • Size：4.8 x 1.3 inch / 123 x 34 mm (L x W), 0.75 inch (19 mm) diameter Pin. 600 lbs load capacity..
  • High Quality Materials：Heavy duty weld on barrel hinges are made of carbon steel Q235B, high strength, high load capacity and hardness for long service life..
  • Smooth & Mute：Bullet hinges weld on steel with ball bearing can be rotated 360 degrees, low friction, more smoother and quieter..
  • Application：Male to female weldable gate door hinges can widely for sliding door, metal door, swing gate, trailer ramp gates, garage door, windows or anywhere you need a hinge to weld on..
  • Easy to use：Hinge pins are welded to either the outer frame or the gate/door and then inserted into the welded hinge pin to create custom, heavy-duty hinges..
Check Stock

Isoflex Topas L32 1 X 370g Cartridge

  • Hardness Tester: Determine material hardness with this hardness testing file set by sliding the file across the object's surface.
  • Color-Coded: The file toolset, with six color-coded files, indicates hardness from 40 to 65 HRC.
  • included chart also shows the appropriate Vickers Hardness (HV).
  • Easy to Store: The hardness test kit comes conveniently packaged in a leath­er-like case with a Velcro-lined flap.
  • the files are approximately 0.157" in diameter and 7" in length.
  • Set Includes: Six color-coded files indicate hardness from 40 to 65 HRC and a vinyl case.
Check Stock

1 X 10-inch Hand Auger Wood Dril, Hexagon Embedded Welding Bushcraft Hand Auger Wrench Scotch Eye Auger Manual Bushcraft Auger Set w/Leather Case Survival Tools -by MinliGUY

  • [Upgraded Welding Scotch Eye Wood Auger Not Easy to Break] Embedded weld which increases the weld area and makes the weld of scottish eye and bushcraft drill more sturdy..
  • [Sharp Scottish Eye Save Effort to Cut]The edge thickness of the bushcraft auger scotch eye is 1/64" hammering it into the wood easier and faster suitable for the hole you drill in the project.
  • [Processed with Hardening Quenching]MinliGUY long scotch-eyed auger bit is made of high-quality hardened carbon steel with super strong high-temperature hardness making this bushcraft auger tool not easy to deform when cutting or drilling..
  • [Sharp Bit& Cutting Edges]The tip of the manual wood drill bit dowels the drill down into the wood with ease. The cutting edge of the bit is professionally ground sharp and clean without burrs..
  • [Package Details]Coming with 1"*10" survival wood drill& 1 protective cover& 1 blow fire tube& 1 portable PU leather case. Commonly used for camping backpacking hiking etc..
Check Stock

uxcell Round Weld Nuts, M10 x 14mm x 13mm Weld On Bung Female Nut Threaded - 201 Stainless Steel Insert Weldable 4pcs

  • 【HIGH QUALITY】-All the weld nuts are made of high quality carbon steel, have high hardness, perfect wear and rust resistance, smooth surface without burr..
  • 【ADVANTAGE】-Flat solder joints, high-quality steel ,good weld ability, thread size accuracy..
  • 【SIMPLE TO USE】-First, clean the welding surface, using sandpaper or steel brush to remove the joint oxide.
  • Second, welding a little bit and adjust the verticality of the thread.
  • 【MULTI APPLICATION】-Used for pipe furniture, tables and chairs, shelves, vehicles, trolley casters and other threaded connection..
Check Stock

Forney 42405 Supercote Hardfacing Welding Rod, 5/32-Inch, 5-Pound

  • Excellent low cost rod for moderate abrasion and low impact application in all positions.
  • Features smooth arc action and easy slag removal.
  • Typical applications include surface buildup on new or worn machine parts of cast steel and manganese steel.
Check Stock

YYS SJMJ 1000pcs Welding Rods Hot Staple Repair Machine Plastic Welding Hot Stapler for Repair Machine Car Bumpers Dashboards Lamp Holders Plastics Rings Daily Plastics Supplies 0.8 0.6mm(Wave Shape)

  • 【Package includes】- You will receive 1000 pieces hot staples of 2 different size, includes 500 x 0.8mm and 500 x 0.6mm. The abundant quantity can satisfy your daily maintenance work on various plastic products..
  • 【Excellent material】- The hot stapler with low melting point, hardness and toughness, can restore your broken parts, prolong its service life,strong for shock and twist after repairing, they are suitable for using with hot stapler to repair..
  • 【Easy to use】- Welding hot stapler can be applied directly, and it is suitable for primary welding operators to weld completely. Only small heating device is needed,very convenient and easy to weld..
  • 【Nice effect】- Our hot stapler plastic repair kit can bridging cracked areas together where added strength；The repaired kit is very sturdy as just like fresh one, the strength of weld seam is generally higher than the parent metal strength..
  • 【Wide usages】- The welding staples are suitable for repairing bumper,dashboard,lamp holder,plastic ring,radiator,car and motorcycle plastic device,which can be welded almost all white metal, including aluminum, aluminum alloy, cast aluminum, zinc alloy, zinc die casting, magnesium alloy, etc., nice to repair most plastic materials like ABS PVC nylo....
Check Stock

HOJILA Leeb Hardness Tester Metal Stainless Steel Alloy Copper Hardness Testing Gauge Meter HRB HRC HV HB HS HL

  • Hardness Tester: Determine material hardness with this hardness testing file set by sliding the file across the object's surface.
  • Color-Coded: The file toolset, with six color-coded files, indicates hardness from 40 to 65 HRC.
  • included chart also shows the appropriate Vickers Hardness (HV).
  • Easy to Store: The hardness test kit comes conveniently packaged in a leath­er-like case with a Velcro-lined flap.
  • the files are approximately 0.157" in diameter and 7" in length.
  • Set Includes: Six color-coded files indicate hardness from 40 to 65 HRC and a vinyl case.
Check Stock

TFCFL Turntable Table, DC24V 20W Rotary Welding Positioner Turntable Table High Positioning Accuracy Suitable for Cutting, Grinding, Assembly, Testing and Other Seam Welding (10KG)

  • ...asy Operation】Structure of precision, light weight, easy to operate, flexible to use. The device can be fixed on the working table or specific tooling for clamping workpiece with manual welding, can also be used with welding operation machine to achieve automatic welding, but also for cutting, grinding, assembly, testing and other processes..
  • √ 【High Accuracy】The main function of the machine is to tilt, turn the workpiece, so that the weld in the horizontal, ship-shape, such as the best position to apply welding. Using foot switch control table rotation, easy to control rotation.
  • Clamp and worktable Choose simple mechanical connection way, high positioning accuracy.
  • Anti-electromagnetic design, efficiently reduce high frequency interference on TIG welding..
  • √ 【Rotary Welding Positioner Turntable Table Application】Especially suitable for under 10KG flange, steel pipe and other seam welding. Used for annular welding, cutting, polishing, assembling etc. Support CO2 welding, MIG, MAG, TIG welding etc. Also for cutting, grinding, assembly, testing and other processes..
Check Stock

Water Hardness Test Kit: 125 Strips Hard Water Test Kit, TESPERT Water Hardness Test Strips for Water Softener Dishwasher Well Spa Pool

  • GET HEALTH AND CLEAN WATER: Hard water test strips can help you to monitor water hardness levels to prevent corrosion, scale formation, turbid water, or excess foam..
  • MULTIPLE PURPOSES: Water hardness tester are ideal for water filtration systems, fish tanks, swimming pools, spas, laundry, cloth diapers, dishwashers, industrial processes, educational experiments, and homeland security applications..
  • FAST AND EASY: Dip, wait 15 seconds and get instant results in 30 seconds. Compare with the color chart on the bottle, ideal range marked on bottle..
  • LONG-TERM STORAGE: Each test kit contains 125 strips. The quality of the water hardness testing kits can be last for 24 months if they are stored in cool condition and away from light..
  • TEST EXPERTS: We have our own professional research center, high efficient manufactory, and online customer services. Choose TESPERT, get your private testing expert..
Check Stock

PHR-1 Small Portable Rockwell Hardness Tester (PHR-1)

  • Portable indentation hardness tester. Single hand operation.
  • Easy conversion. The test results can be converted to HB, HR,HV and HW easily through conversion table..
  • High sensitivity. Featured with 100 scales, much more sensitive than Webster hardness testers applied in aluminum alloys industry..
  • Wide valid testing range equivalent to Brinell hardness 25-150HBW..
  • Barcol Impressor is mainly applied to test aluminum and aluminum alloys..
Check Stock

Rotary Welding Positioner, 110V Light Duty Welder Turntable Table Mini 2.5' 3 Jaw Lathe Chuck 10KG (USA Stock)

  • ★【The Main Functions】Light Positioner is mainly used for welding of annular weld. The main function of the machine is to tilt, turn the workpiece, so that the weld in the horizontal, ship-shape, such as the best position to apply welding..
  • ★【High-quality DC Motor】High-quality DC motor, the worktable running smoothly, welding speed can be stepless regulation, large adjustment range, high adjustment precision..
  • ★【Multifunction】The device can be fixed on the working table or specific tooling for clamping workpiece with manual welding, can also be used with welding operation machine to achieve automatic welding, but also for cutting, grinding, assembly, testing and other processes..
  • ★【High Positioning Accuracy】Clamp and worktable Choose simple mechanical connection way, high positioning accuracy.
  • Especially suitable for under 10KG flange, steel pipe and other seam welding..
  • ★【Easy to Operate】Using foot switch control table rotation, easy to control rotation.
  • Light weight, easy to use, handling, easy to operate..
Check Stock