Reviews Weld Flux

AZZUNO 135 Amp MIG Welder, 3 in 1 Multiprocess Welder 110V Flux Core Welder Flux MIG/Lift TIG/Stick Welding Machine Synergic Control IGBT Inverter Welder (volts, 110)

  • Synergic Control: The welding parameter is built-in with precise data. It will choose the voltage, amperage and feeding speed that is needed based on welder data, making it much easier for new welders..
  • Multi-functions in one machine: Suitable for MMA, Lift TIG, flux MIG..
  • Weld up to .030″(0.8mm) and .035″ (0.9mm)with flux core wire.Can Handle E7018 basic electrode..
  • Powerful And Safe Machine:This 135A Welding machine can weld mild up to 3.0mm plate,equipped with overload and overheating system,feel free to use,it’s very safe..
  • This Flux Core Welder fits .030″(0.8mm) &. 035″ (1.0mm) flux core wire. ARC mode fits rods: E7018, E6013..
Check Stock

GZ GUOZHI 200A MIG Welder, 110V/200V Dual Voltage 6 in 1 Stick Welder/Gas MIG/Gasless Flux Core MIG/Lift TIG/Spot welding/Spool Gun Multi-Process Welding Machine with Dual LED Digital Display

  • 【Upgraded Mig Welder & Excellent Display】: GZ GUOZHI Multifunctional Welding Machine has double LED display for easy viewing. Current can be stepless adjustment（MIG: 40A-200A,MMA:20A-180A,TIG:10A-180A). The voltage and current can be preset, can use the welder without adjusting next time, more convenient to use..
  • 【Synergic Control】: GZ GUOZHI MIG welder has MIG unitary design, Automatic change of the voltage & wire feeding speed by adjusting amperage. It is easy for both beginners and professional welders to operate it.You can also switch to manual mode and adjust machine parameters freely..
  • 【Advanced Technology】: MIG welder with Gas MIG and FLUX MIG, 2 pounds /10 pounds dual purpose. FLUX MIG can weld 0.03" & 0.035" Flux core wire, GAS MIG can weld 0.03" & 0.035" solid wire. This welder ideal for welding rods below ф0.2" with ARC function and also can weld stainless steel if you buy a extra TIG lift torch with Lift TIG function. With 2T/4T/wire test/gas test functions, with spool gun connector, can weld with a spool gun..
  • 【Dual-Voltage & High-Quality Accessories....
Check Stock

Welding Basics: An Introduction to Practical & Ornamental Welding

  • 130 AMP MIG STYLE WELDER: Mig welder is easier for beginners than tig or stick style welders. Includes welding gun, ground wire clip (1.6m), Included accessories, cleaning brush, protective mask, 110v adapter.
  • GAS OR FLUX CORE: Digital MIG Welding Machine uses 0.6-0.8mm flux-cored wire. Can also be used with gas setup.
  • FULL BRIDGE CIRCUIT: Full bridge circuit provides professional level stability. Make sure to avoid models with only half bridge circuits. 60% rated duty cycle allows you to weld for six minutes then rest for four minutes.
  • DUAL VOLTAGE 110V/220V: MIG welder includes 220v plug and 110v adapter, machine features up to output that allows you to weld steel up to 0.08” plate steel. Supports, wire feeder 24V w/ 0.7KVA/1.8KVA maximum and minimum power.
  • ADJUSTABLE SPEED WIRE FEED: Adjust up to 6.7m per minute, dial in the perfect weld. Test data supports stable performance & output voltage. Automatically adjust the inverter pulse width through closed-loop control to ensure output stability.
Check Stock

TOOLIOM Aluminum MIG Welder 250A 110V/220V Dual Voltage MIG/Lift TIG/Stick 3 in 1 Welding Machine

  • Multi-functions in one machine, suitable for Gas MIG/Flux MIG/Stick/ Lift TIG..
  • Can weld aluminum ,compatible with a spool gun or MIG torch with graphite wire feed tube..
  • MIG synergistic setting & MIG manual setting, good choice for both novice and professional..
  • Can be used with various welding wire, .040" solid/flux/aluminum wire,035" solid/flux wire,030"solid/flux wire,024" solid wire..
  • Dual voltage input design: Welding machine can be plugged into 110/220V dual voltage (Automatic fitting)..
Check Stock

Forney Easy Weld 261, 140 FC-i Welder, 120V, Green

  • EASY TO USE-140 FC-I MIG machine uses 0.30, flux core wire. It has infinite voltage and wire feed speed control so you can dial in the perfect weld! Perfect entry level welder.
  • POWERFUL- Up to 140 Amp output that allows you to weld mild steel up to 1/4 in plate.
  • PORTABLE WELDER- Lightweight 19 lbs. easily carried to any Do-It-Yourself, Maintenance, Repair, Metal Fabrication and Hobbyist project.
  • RUGGED- All metal case, Built to take the day to day. Big enough to handle 2 and 10 pound rolls of wire.
  • WELDER INCLUDES- 8' MIG gun, 8' ground clamp, Integrated handle with torch wrap and a 20A-15A adapter. Backed by a 12-month warranty.
  • PRODUCT SPECIFICATIONS- Dimensions: 16.75" (425.45 millimeters) x 8.125" (206.38 millimeters) x 12" (304.8 millimeters), Weight: 19 lbs. (8.62 kilograms), Gasless/flux-core welding only, Portable, Torch wrap, Infinite voltage and wire feed speed control, 120-volt input, 140 AMP output, Welds up to 1/4 in. (6.35 millimeters), Handles .030 in. or 0.35 in. wire, Includes: 8' MIG gun, 8' ground clamp and 20A - 15A adapter, Duty Cycle 30% @ 90A.
  • RECOMMENDED ACCESSORIES- Contact Tips (60170, 60171 and 60172),Welding Nozzles: (85336 and 85337), Diffuser: (85339), Flux Core MIG Wire: (42300 and 42301), Anti-Spatter Spray: (37030), Nozzle ....
Check Stock

J.W. Harris Company 40022 Stay-Silv White Brazing Flux

  • It is a powder flux formulated for brazing gold and silver..
  • Jar of welding powder brazing flux powder welding cast consumables jewelry weld repair supply.
  • There are 250 grams in this jar, which will definitely meet your needs..
  • The powder melts at 700 degree centigrade.​.
  • Brazing powder improves the weldability of metal in the process of high temperature welding..
Check Stock

ARCCAPTAIN 130A MIG Welder 110V Flux Core MIG Welder/Lift TIG/Stick 3 in 1 Welding Machine with Synergy IGBT Inverter Portable Gasless Welder Equipment with Welding Gun and 2lb Welding Wire

  • SYNERGIC CONTROL: The recommend current and wire feeding speed will be automatically matched after selected diameter of the welding wire(you can choose 0.8/0.9/1.0 flux core wire). The MIG welder is easier for beginners or those that are learning to weld and want to make small repairs around the house..
  • 3-IN-1 WELDER: 3 welding modes Flux Core Gasless MIG/ Lift TIG/ MMA meet your different requirements (Need to buy extra Lift tig torch). Adjust the current and 10-speed variable feed controls for perfectly managed flux-cored welding of carbon steel, stainless or even thicker steel, Ideal for home DIY, outdoor repairs, rusty metal, farm and road equipment, and maintenance and repairs..
  • SAFETY PROTECTION: The welder comes with an attached MIG torch and power cable, you can weld after unpacking the box, it’s convenient to use. Built-in over-current protection, over-load protection, overheating, and over-voltage function that extend the lifespan of the machine..
  • PORTABLE AND COMPACT: The machine weighs only 11.79 pounds, and you can freely carry it anywhere with a handle or shoulder strap. Package includes 1* MIG130 Welder, 1* MIG Torch, 1*Ground Clamp, 1* Electronic Holder, 1* .030"/2lb Flux Cored Wire,1* 0.8/.030" conductive Nozzle,1* 0.9/.035" cond....
Check Stock

SereneLife MIG Welder Flux Core Welding Machine with Gas and No Gas, 130A DC 110V 220v IGBT Inverter Welder with Automatic Wire Feed, Welding Gun, Ground Wire, Brush, Mask, Dual Voltage Adapter

  • 130 AMP MIG STYLE WELDER: Mig welder is easier for beginners than tig or stick style welders. Includes welding gun, ground wire clip (1.6m), Included accessories, cleaning brush, protective mask, 110v adapter.
  • GAS OR FLUX CORE: Digital MIG Welding Machine uses 0.6-0.8mm flux-cored wire. Can also be used with gas setup.
  • FULL BRIDGE CIRCUIT: Full bridge circuit provides professional level stability. Make sure to avoid models with only half bridge circuits. 60% rated duty cycle allows you to weld for six minutes then rest for four minutes.
  • DUAL VOLTAGE 110V/220V: MIG welder includes 220v plug and 110v adapter, machine features up to output that allows you to weld steel up to 0.08” plate steel. Supports, wire feeder 24V w/ 0.7KVA/1.8KVA maximum and minimum power.
  • ADJUSTABLE SPEED WIRE FEED: Adjust up to 6.7m per minute, dial in the perfect weld. Test data supports stable performance & output voltage. Automatically adjust the inverter pulse width through closed-loop control to ensure output stability.
Check Stock

Hobart Handler 125

  • Broad output range of 25 – 130 amps. Allows you to weld up to 1/8 in. Steel with flux-cored wire..
  • Four output voltage settings. Provides a broad operating window for each wire, with quick and easy adjustment for different thickness and joints..
  • Factory-installed Gas solenoid. Makes it easy to change from flux-cored wire to MIG welding.
  • Built-in Contactor. Eases use and excellent safety feature which makes wire electrically “cold” until gun-trigger is pulled..
  • Durable feed head with quick-release drive roll tension lever. Positive feed with adjustable tension Plus easy accessibility to thread new wire..
Check Stock

HZXVOGEN MIG Welder 100V/220V 200Amp Weld Aluminum Wider LCD Display Smart Control IGBT Inverter MIG Stick TIG Mix Gases Gasless Flux Cored Solid Core Wire Welding Machine Model HBM2280

  • THE MOST ADVANCED MULTIFUNCTIONAL WELDER - HZXVOGEN HBM2280 MIG welder with wider LCD displayed, it is a smart control welder. It is super easy and....
  • CAN WELD ALUMINUM - This welder can weld aluminum, iron, carbon steel, stainless steel, etc. This mig welder came with qualify accessories: MB24 Mig....
  • MIG FUNCTION - 1. MIX GAS can use 0.6/ 0.8/ 0.9/ 1.0mm flux wire. When using 0.6/ 0.8/ 0.9mm wire, it can weld 0.7 ~ 3.4mm thickness. When using 1.0mm....
  • TIG FUNCTION - Can use 1.6mm and 2.4mm tungsten.When using 1.6mm tungsten can weld 0.7 ~ 4.8 thickness, using 2.4mm tungsten can weld 1.2 ~ 6.4mm....
  • MMA FUNCTION - Current 10 ~ 170 amp. Can weld 2.5/ 3.2/4.0mm electrode. Using 2.5/ 3.2mm rods, can weld 1.6 ~3.4mm thickness. Using 4.0mm rods, can....
Check Stock

Welding Machine 3 in 1 Gasless Mig Welder 110/220V, Flux Core/Lift TIG/Stick Welder 160A

  • Welding Machine 3 in 1: 3 in 1 combo gasless flux core welder, stick welder and Lift TIG welder. (TIG torch need purchasing separately)..
  • Dual Voltage Input Design: Welding machine can be plugged into 110V / 220V dual voltage (automatic matching)..
  • 160A Welder: Up to 160A output current that can weld mild up to 5/32 inch (4.0mm) plate. The welder comes with 10pcs welding rods..
  • Gasless MIG Welder: Release hard moving of gas cylinder, and work with flux core wire perfectly( welder suitable for 0.030/0.035" flux core wire), comes with 1pcs 0.030"/2 lbs flux core wire, 2pcs 0.030" mig tips, 2pcs 0.035" mig tips..
  • Synergic Control: Through a knob to adjust the welding current, other welding parameters (wire feeding speed, welding voltage, inductance value, etc.) automatically matched with it. It has the feature of easy adjustment. It is suitable for both professional welders and novices..
Check Stock

OPTICO MIG 135E Welder Machine 110/120V IGBT Welding Machine Gasless Flux Cored Welder Automatic Wire Feed Welder with 40-100A for Beginner DIY Home Portable Welding Machine Kit with Mask

  • ✔【Great Welder for Home Repairs】Use 1 kg (0.8 mm) flux cored wire to weld on (0.5 mm-5mm) workpieces. Suitable to weld carbon steel, low alloy....
  • ✔【Beginner Friendly】One-Knob Intelligent control system. This mig welder machine will auto control the voltage and current to achieve smooth....
  • ✔【Intelligent Protection】This mig welding machine has automatic protection functions of overcurrent, overvoltage and overheating. After the....
  • ✔【Portable Welder】Lightweight and Portable - IGBT inverter gasless flux welder machine, only 15.2 lbs and 12.52 X 5.31 X 9.45 inches. With....
  • ✔【Professional CSA Certificate】This Welding Machine have CSA certificates that recognized in both the United States and Canada. Package Content:....
Check Stock

TOOLIOM E71T-GS .030\ Diameter 2-Pound Spool Flux Core Self-shielded Carbon Steel Mig Welding Wire for TL-135M TL-250M Pro

  • AWS E71T-GS Self Shielding Gasless flux cored welding wire .030” Diameter, 2 Pound Spool.
  • Self-shielded: No need for external gas or flux.All positions, Single and multi pass welding..
  • Good penetration, Less splash, Beautiful weld bead appearance , Easy slag removal.
  • Great for Welding Outdoors or in Drafty Conditions.
  • To be used on TOOLIOM TL-135M,TL-250M Pro MIG Welder (Flux Core MIG Welding).
Check Stock