Reviews Weld Assembly

Weld on Filler Cap, KIMISS Aluminum Alloy Weld On Oil Tank Filler Neck with Cap Filler Neck 1.5'' 1 1/2'' OD for Fuel Tanks Weld In Fuel Cell Cap Weld On Fuel Cap Fuel Filler Neck Aluminum Fill Cap

  • ... alloy materials, which is maximize the durability, reliability, wear resistance, and have long service life. It is more reliable and safer than other similar products. And it will be your Ideal choice..
  • Easy to Install: The outstanding advantage of our Aluminum Weld On Cap Weld in Fuel Cell Cap is that it is simple assembly and disassembly, convenient and practical, you can directly replace the broken or shabby one, helping you save a lot of time and energy. If you want more comfortable for your beloved car, our Weld on Fuel Cap is the best choice for you..
  • Strict quality control: Each of our Weld On Filler Cap are manufactured in strict accordance with standard specifications. We have a set of quality control system to ensure that the products are of high quality. At the same time, we will only ship products if they are in good condition. You can buy with confidence. If you have any product questions, please contact us in time..
Check Stock

Northern Brewer - MegaPot Stainless Steel Brew Kettle with Volume Markings (10 Gallon w/Valve and Thermometer)

  • 10 Gallon (40 quarts / 37.8 liters) capacity.
  • 4mm Tri-Clad Bottom. All Stainless Steel Construction.
  • Graduated Volume Markings inside the kettle.
  • Weld-less Ball Valve Assembly and Weld-less Thermometer.
Check Stock

Titan Attachments DIY 24' Weld On Backhoe Thumb Hoe Clamp .5' Steel Plate Assembly CNC Plasma Cut

  • Easy to assemble and weld. Plasma cut for tight tolerances.
  • Includes: 2 jaw plates, 1 gusset plate, 1 backplate, 2 side plates, 1 hinge tube, 3 clevis pins with keeper pins.
  • 1/2" Teeth Bars, and 3/8" body assembly plates Comes unpainted and ready to weld.
  • Please measure your bucket before ordering to ensure a proper match..
Check Stock

Powerblanket Cure PRO 3' x 4' Heated Concrete Curing Blanket - Rugged Industrial Pro Model

  • Fit **Please measure your bucket before ordering to ensure a proper match. A mismatched thumb will result in damage to your backhoe, as larger backhoes have more bucket force. For example: if you mount a 25” thumb on a hoe that requires a 31” one, you will probably bend or break your equipment. Make sure that this thumb is at least the length of your bucket when measured from boom to the teeth or the warranty may voided if damage occurs.**.
  • Easy to assemble and weld Please measure your bucket before ordering Plasma cut for tight tolerances High quality steel Adjustable teeth bars Easily removable.
  • Condition: Brand new, Color: Black, Material: Steel, 5/8" tine plates, and 3/8" body assembly plates , Tine length: 32".
  • The 36" weld on backhoe thumb from us is perfect for anyone that needs to add a high quality thumb to their excavator. Simply weld it to the boom and its ready for work. When not in use, you can just remove the teeth bars and store them away. Made from heavy duty 5/8" thick steel plates, this pro-duty implement is ready for just about any job..
Check Stock

Stick Electrode, 1/8 in. dia., 10 lb.

  • 200 AMP Electrode Holder – The comfortable, lightweight electrode holder is rated for 200 amps of current at a 20% duty cycle..
  • 12.5 FT Cable Length - The assembly features a flexible copper welding cable which is 12.5 FT in length..
  • Twist-Mate / Dinse Connector – The assembly features twist-mate / dinse connector is which is compatible with the Power MIG / Weld-Pak 140, Power MIG 180, Power MIG 210mp, SquareWave TIG 200 and many other Lincoln or competitor power sources..
  • TRUSTED BY PROFESSIONALS – This electrode holder assembly is used by professional fabricators on a daily basis..
  • For use with 3/32, 1/8 or 5/32 Stick (SMAW) electrodes..
Check Stock

ORISTACO Work Safety Boots Breathable Lightweight Reliable Durable Steel Toe Industrial Construction Shoes High Cut 01 Black 46

  • MULTI-PROCESS WELDER- 3 in 1 Stick Welder, MIG Welder and DC TIG Welder (Accessories for TIG Welding not included) everything you need in one machine.
  • EASY TO USE- Easy start makes every strike EASY! Three position switch allows you to change process quickly.
  • CONTROL YOUR WELD- Infinite voltage and wire feed speed controls allows you to dial in the perfect weld. Rated output voltage range- 12 - 23V. Rated....
  • RUGGED- All metal case, Built to take the day to day. Big enough to handle 2 and 10 pound rolls of wire. Full metal wire drive assembly.
  • WELDER INCLUDES- 10' MIG gun, 8' electrode holder, 8' ground clamp, Integrated handle with torch wrap, 20A - 15A adapter and one additional .030"....
Check Stock

SBDs (Pack of 1) POP Pull Pin 1/2\ Diameter Spring Loaded Steel Plunger - 1\ Diameter x 1-1/2\ Length Weld ON Steel Barrel - Jumbo Round Designer Hard Plastic Knob | Knurled Round lock Nut.

  • SBDs (Pack of 1) POP Pull Pin 1/2" Diameter Spring Loaded Steel Plunger - 1" Diameter x 1-1/2" Length Weld ON Steel Barrel - Jumbo Round Designer Hard Plastic Knob | Knurled Round lock Nut..
  • * Spring-loaded pull pin for locating, fastening, and quick change operations. This spring loaded pull pin allows you to retract and engage the plunger for locating, fastening and quick change operations. It consists of a housing (barrel) and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle retracts the plunger fully into the pin housing. Releasing the handle allows the plunger to extend..
  • The plunger pull up force is approximately 5 to 10 lbs. The Barrel has Solid round housing for Weld-On. Can be Painted or Powder Coated..
  • Heavy duty spring action pins , used for height and length adjustments on racking systems, fitness and rehabilitation equipment and many other uses..
Check Stock

Weld On Grab Chain Hook G70 3/8\ Weld On Chain Grab Hooks Bucket Flatbed Trailer Wrecker Tow Tie Down Forged Steel Working Load Limit: 6600 lbs

  • Weld-on Type, Grab, Hook. Working load limit 6600 lb.. Size 3/8 inch, Grade 70, for use with 3/8 in chain.
  • The best hook-used for welding on the tractor bucket, it is very suitable for any field of use, and can be used with the following statements: weld on hooks weld chain hook weld on clevis weld-on clevis grab chain hooks weld tow hook weld hooks for buckets forks weld hook3/8 weld hook grab hooks 3/8weld on grab hook weldable hooks weldon hooks weld clevis hook 3/8weld on chain hooks.
  • Grab hooks work well with chains and ratchet binders for securing your load or for tow anchors..
  • Material: Forged Steel，Package Includes:4pcs hooks.
  • Note: Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. We make every effort to provide customers with satisfactory service. Feel free contact us by emails if you have any problems..
Check Stock

Single Tab Weld Nut with Target - Spot Weld Nuts 5/16-18 - Weld Nuts/Spot/Offset Hole - Low Carbon Plain Steel (10)

  • 10 Pack 5/16-18 Spot Weld Nuts - Single Tab - With Target.
  • This Tab Spot Weld Nut is a recessed electrode guide greatly facilitates welding to thin materials. It is ideal for use when a self-locating spot-weld nut is needed. This weld nut can be used in restricted areas such as corners, channels, and other confined areas..
  • This Tab Spot Weld Nut is extremely versatile and will provide a robust spot weld connection in a wide range of applications and conditions. If your product or application has fastener space constraints, you should consider the use of this weld nut..
  • This weld nut has a narrow body that is well suited for use in confined areas..
  • The weld nut features a strong single button projection which gives a deeper, more penetrating weld than is ordinarily obtained from other types of projections..
Check Stock

Portable Backhoe Plans DIY Track Hoe Excavator Garden Digger Build Your Own

  • High Quality Steel: The base is a solid piece that is formed so it is stronger and with this design the stress is on the base with the solid  one piece base there is no chance of smashing in your hoe's arm.
  • Powder Coated Surface: Adjusting powder coated surface, our backhoe excavator thumb are able to resist corrosion. Made for longivity, this pro-duty implement is ready for just about any job.
  • 1/2 Inch Thick: Made from heavy duty 1/2" thick steel plates, make sure that this thumb is at least the length of your bucket when measured from boom to the teeth.
  • Bolt-on Design: This backhoe excavator thumb is easy to assemble and weld, each part is plasma cut for tight fit and easy assembly.
  • Easy to Adjust and Fold Away: This easy to assemble DIY backhoe thumb is perfect for anyone that needs a high quality thumb and knows how to weld, simply folds out of the way when not in use.
Check Stock

J-B Weld Original Epoxy, Steel Reinforced Epoxy, High Strength - 2 Pack, Dark Grey (8265S-2)

  • J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces. Perfect for DIY household, automotive, marine, craft repair and much more..
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey..
  • VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid..
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

Rotary Welding Positioner, 110V Light Duty Welder Turntable Table Mini 2.5' 3 Jaw Lathe Chuck 10KG (USA Stock)

  • ★【The Main Functions】Light Positioner is mainly used for welding of annular weld. The main function of the machine is to tilt, turn the workpiece, so that the weld in the horizontal, ship-shape, such as the best position to apply welding..
  • ★【High-quality DC Motor】High-quality DC motor, the worktable running smoothly, welding speed can be stepless regulation, large adjustment range, high adjustment precision..
  • ★【Multifunction】The device can be fixed on the working table or specific tooling for clamping workpiece with manual welding, can also be used with welding operation machine to achieve automatic welding, but also for cutting, grinding, assembly, testing and other processes..
  • ★【High Positioning Accuracy】Clamp and worktable Choose simple mechanical connection way, high positioning accuracy.
  • Especially suitable for under 10KG flange, steel pipe and other seam welding..
  • ★【Easy to Operate】Using foot switch control table rotation, easy to control rotation.
  • Light weight, easy to use, handling, easy to operate..
Check Stock

The Woodhaven 3 Foot Firewood Log Rack

  • Easy Assembly. No bolts or tools required..
  • We are proud to say all components of this Woodhaven are made in the USA.
  • Robotic welded ends sections for strong precision arc weld ends..
  • Environmentally friendly powder coat finish..
Check Stock