Reviews Wedge Anchor Zinc Plated

3/4 x 7 - 20 PCs Wedge Concrete Wall Anchors Bolt Zinc Plated Heavy Duty Fastener for Concrete

  • Size: 3/4 inch Diameter & 7 inches length.
  • Material: Made of carbon steel & zinc plated surface for corrosion resistant.
  • Feature: These wedge anchors are used on concrete or cement surfaces to secure metal objects.
  • Caution: This wedge anchor can not be pulled out after use, so be sure to determine the insertion point before use..
  • Pack: Total number of 20 PCs 3/4'' x 7'' wedge anchors.
Check Stock

uxcell 10Pcs 9mm-15mm Grip Range Toggle Hollow-Wall Anchor Screw Eye Assortment

  • Wedge anchor provides a secure hold in solid masonry and uncracked concrete.
  • Anchor consists of a 304 stainless steel body, washer, nut, and clip to provide more corrosion resistance than galvanized or zinc-plated steel anchors.
  • Meets Fed. Specs. QQZ-325Z Type II Class 3 and GSA FFS-325 Group II Type 4 Class 1, and complies with Miami-Dade NOA #08-0911.02 code.
  • Ultimate tensile strength is 2,000 lb. at 1-1/4" embedment depth in 4,000-psi concrete with a static load.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

Horiznext 3/8 x 3 Wedge Anchor for Cement and Concrete only zinc-Plated Carbon Steel Screws and lag Bolts （ 30 pcs

  • ➤Made of carbon steel, heavy duty, durable..
  • ➤Great for use in CONCRETE only, and should never be used in block or brick base material.It's strong and great for both indoor and outdoor use. Whether you are attaching a boat lift to a seawall or securing a safe to concrete in your or fence, you can count on Bolt Dropper wedge anchors to hold tight..
Check Stock

Malta Dynamics Reusable Parapet Anchor for Temporary Fall Arrest Anchorage, Fits Parapet Walls from 2.36” to 14.1” Thick, No Installation Tools Required, Black

  • Reusable Parapet Anchor: This reusable parapet anchor is specifically designed to be used on flat roofs that are surrounded by a parapet wall with a minimum wall thickness 2.36". Maximum wall thickness 14.1”. Overall length 25.5”. Overall height 14.25". 9” minimum wall height ..
  • Non-Penetrating Design: Designed to prevent parapet wall penetration, this anchor features rubber protective pads to further eliminate damage to the parapet wall. Dual tightening handles for even force distribution.
  • protective pads eliminate damage during install.
  • Strong & Durable: Meets the standards of OSHA and ANSI Z359.18-2017 Type A. Manufactured with one zinc plated steel D-Ring, this anchor’s body is composed of alloy steel with zinc plated steel screws. Intended to use as part of a personal fall arrest system, it has a 130-310lbs weight capacity range..
  • Easy To Install: No installation tools are required for this parapet wall roof anchor. With its dual tightening handles for even force distribution, this anchor is fully adjustable .Main body: Alloy Steel. D-ring: Zinc Plated Steel. Set Screws: Zinc Plated Steel..
  • Let Us Help Protect You: At Malta Dynamics we have more than 140 years combined developing fall protection gear, we know a good....
Check Stock

BoltHold - SP58 Zinc-Plated Asphalt Anchor 1-1/4 x 10 - with 1.5 Hex Bolt & 2 Washer - Chemical Anchors - for Installation of Sheds Carports Bike Racks & More - 5000 lb Pull Rated - 6 PK

  • ZINC-PLATED ASPHALT ANCHORS: Stop wasting time pouring concrete! BoltHold's industrial in-ground anchors allow you to install anything on asphalt in three simple steps, offering a fast, cost-effective, and reliable solution to asphalt mounting. Measuring 10" long, these SP58 Zinc-Plated Steel Anchors incorporate a 5/8"-11 UNC (coarse) female thread and are pre-installed with a 1.5" long bolt and a 2" diameter washer. Set includes 6 anchors..
  • OUR STRONGEST ANCHOR: Pull rated for 5000 lb! Designed for a very heavy load, BoltHold SP58 chemical anchors resist at least 5,000 pounds pull and 2,500 pounds of high shear force at ground level. Rated for >720 in-lb rotary torque, the anchor's welded spiral offers a strong bond with the grout, while the washer at the top prevents the anchor from dropping below the surface or being pulled up into the mounting plate when tightening the bolt..
  • LONG TERM STABILITY: Creates a stress-free bond that lasts! Due to asphalt's weaker nature, typical expansion-type wedge anchors used in concrete won't hold to the pressure. BoltHold anchors solve this problem by embedding deep into the compacted gravel below the asphalt layer to increase the shear resistance and ensure long-lasting stability—perfect for safely installing....
Check Stock

Powers Fastening Innovations 7434SD1 Power-Stud and Sd1 5/8-Inch by 6-Inch Type Carbon Steel Wedge Expansion Anchor Carbon Steel Clip 25 Per Box

  • Fully threaded, torque-controlled, wedge expansion anchor.
  • Designed for consistent performance in cracked and untracked concrete.
  • Manufactured with a zinc plated carbon steel body and expansion clip.
Check Stock

Powers Fastening Innovations 7454SD1 Power-Stud and Sd1 7/8-Inch by 10-Inch Type Carbon Steel Wedge Expansion Anchor Carbon Steel Clip 10 Per Box

  • Fully threaded, torque-controlled, wedge expansion anchor.
  • Designed for consistent performance in cracked and untracked concrete.
  • Manufactured with a zinc plated carbon steel body and expansion clip.
Check Stock

Powers Fastening Innovations 7404SD1 Power-Stud and Sd1 1/4-Inch by 3-1/4-Inch Type Carbon Steel Wedge Expansion Anchor Carbon Steel Clip 100 Per Box

  • Fully threaded, torque-controlled, wedge expansion anchor.
  • Designed for consistent performance in cracked and untracked concrete.
  • Manufactured with a zinc plated carbon steel body and expansion clip.
Check Stock

Powers Fastening Innovations 7422SD1 Power-Stud and Sd1 1/2-Inch by 3-3/4-Inch Type Carbon Steel Wedge Expansion Anchor Carbon Steel Clip 50 Per Box

  • Fully threaded, torque-controlled, wedge expansion anchor.
  • Designed for consistent performance in cracked and untracked concrete.
  • Manufactured with a zinc plated carbon steel body and expansion clip.
Check Stock

Nylon Hammer Drive Pin Nail in Masonry Concrete Anchors Zinc Nail 1/4 x 3 Qty 250

  • 1/4 inch Diameter Nylon Mushroom Head Nail In Masonry Anchors with Zinc Plated Steel Nails.
  • Using a pre-drilled hole, they are installed with hand tools (typically a hammer).
  • Drive the pin into the anchor body, expanding the anchor, to form a tight fit.
  • Rust resistant nylon and zinc plated nail.
  • Designed for light duty masonry applications.
Check Stock

Nylon Hammer Drive Pin Nail in Masonry Concrete Anchors Zinc Nail 1/4 x 1 Qty 100

  • 1/4 inch Diameter Nylon Mushroom Head Nail In Masonry Anchors with Zinc Plated Steel Nails.
  • Using a pre-drilled hole, they are installed with hand tools (typically a hammer).
  • Drive the pin into the anchor body, expanding the anchor, to form a tight fit.
  • Rust resistant nylon and zinc plated nail.
  • Designed for light duty masonry applications.
Check Stock

100 Push Ups In 6 Weeks - Workout At Home

  • The Web Slide Difference. The Web Slide Exercise Rail System organizes your clinic and streamlines patient training sessions. Any resistance bands/tubing, pulley devices, or other exercise equipment that utilizes a Web Anchor Strap for door attachment can be set up and ready to go in seconds with a Web Slide Exercise Rail—no door required!.
  • Versatile. The Web Slide Exercise Rail System’s compact, space-saving size makes it unobtrusive in the clinic, home, or gym, while still allowing for full-body workouts and rehab exercises at a wide range of anchor points. The system includes fifteen levels of elevation for every point of the body. All pieces included work with the Web Slide Exercise Rail System, most other storage systems, or in any standard door..
  • What's Included. You’ll be ready to work out in minutes with this space-saving unit! This system comes with 3 Zinc-Plated Steel Web Slide Exercise Rails (with mounting hardware and Safety Slides included), 1 Zinc-Plated Steel Storage Rack (with sixteen positions), 1 Exercise Poster, 1 Home Ranger Shoulder Pulley, 5 Unilateral, 5 Bilateral ExerBand Resistance Tubes, and 1 Extremity Strap..
Check Stock

5/16\-18 Double Expansion Shields (Pack of 12)

  • Zamac Zinc Alloy Concrete Anchors for Masonry Screws or Bolts.
  • Four Part design: a two-piece tubular shield, a hollow, wedge-shaped cone and a wedge-shaped nut-- brought together into a single anchor unit.
  • Used in soft masonry with machine screws or machine bolts.
  • Can also be used in harder materials, including stone, brick, concrete or block.
Check Stock