Reviews Way Oil Valve

3/4\ Brass Electric Solenoid Valve,  110V Air Valve Normally Colsed for Water Air Gas Fuel Oil 2W-200-20

  • High quality 3/4inch Brass Electric Solenoid Valve： Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc.  .
  • Normally closed electric solenoid valve: 2 way solenoid valve,Model: 2W-200-20.
  •   3/4" NPT port,   Working temperature range: -5 ℃~80 ℃.
  •  Operating  Pressure: MIN.0kg/cm - MAX.10kg/com  .
  • This solenoid valve 110v was manufactured with a VITON seal,two-way inlet and outlet ports with standard female thread NPT connectionsm and heat and oil resistant Viton gasket.   .
  • Applicable Irrigation Controls (garden, Farm,etc.), Liquid Controls ( Pipeline, Artificial River Etc. and Air Controls ( Lab, Factory, Etc.) -3/4 inch Brass Electric Solenoid Valve Also known as110v solenoid valve,electric solenoid water valve,brass liquid solenoid valve. .
  • This valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, We will gladly replace it..
Check Stock

ValvoMax Quick Twist Oil Drain Valve – the Fastest, Easiest, Cleanest Way to Change Oil at Home – No Tools, No Mess, No Cleanup – for M12-1.75 - Stainless Drain Hose Attachment

  • CHANGE YOUR OIL AT HOME IN 10 MINUTES OR LESS WITH NO MESS. The fastest, easiest, and cleanest way to change your oil at home with the ValvoMax Quick Twist Oil Drain Valve. Replaces your drain bolt. Find your vehicle using the Amazon Confirmed Fit search tool. Free returns, no oil leaks guaranteed, lifetime warranty, 100% satisfaction, made in USA, veteran owned..
  • THE COMPLETE SOLUTION. Includes Quick Twist valve, steel cap with embedded rubber seal, drain tube assembly, and washer for installation. Eliminate the need for extra tools, no stripped or frozen drain plugs, avoid hot oil burns, and drain oil hot. Prevent spills, eliminate injuries, promote sustainability, controlled sampling, lower cost, reduce time, and more!.
  • PREMIUM BUILD. Features rugged Stainless-Steel construction that’s built to last, wave spring technology allows for FAST oil drain, premium VITON O-rings, safety cap with embedded rubber seal. Nothing comes close to the durability offered. Material you can TRUST! Designed with 3 redundancies in mind to eliminate any chance of leak..
  • NO LEAKS GUARANTEED. The Quick Twist valve has 3 backup mechanisms to p....
Check Stock

EONLION 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Gear Gearbox

  • Function-10L capacity pneumatic air suction pump will help you quickly change (pump/distribute) the vehicle's ATF oil..
  • Why Need It- Pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy..
  • Advantage- Fluid extractor can insert into engine dipstick tube to extract and refill engine oil or transmission fluid directly, no more need to crawl about under lifted vehicles and avoid mess..
  • Simple Operation-load more fluid at once. Pneumatic operation, easy to suck or pump oil. Equipped with pressure gauge (0-80 psi/0-6 bar), which can accurately read data..
  • Fitment- Suitable for a variety of models, such as compatible with Audi/Benz/BMW/Ford/Mini Cooper/Honda/Hyundai/Infiniti/Kia/Lexus/Nissan/Skoda/Toyota/Porsche/Volvo/Volkswagen DSG/Volkswagen CVT..
Check Stock

YSTOOL 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Differential Transfer Case Gear Gearbox Power Steering Coolant with Pump Assembly Tank

  • ...i, Infiniti, VOLVO and Lexus. You can find appropriate models by applicable manual.
  • YSTOOL pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. Absorb, transport and distribute liquids under safe and clean conditions. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy. Pneumatic tool, works with vacuum pump to extract and with air pump to refill, ensuring high efficient and labor-saving.
  • Pump assembly incorporates the container cover, the handle trigger with lock, 2-way control valves for conversing evacuate and dispense, safety valve for automatically releasing excessed pressure (above 43psi /3bar), 1/4" American style air inlet plug, pressure gauge (0-80psi/0-6bar) for monitoring the pressure change, quick coupler for connecting main hose. 10L big capacity well constructed container, is marked with accurate scale to help observe the amount of liquid. Stable base avoids dumping.
  • The main hose is 80" long, with a quick plug on one side to connect the container, and a quick coupler on the other side to connect the dipstick tubes or ATF adapters. There is a ball valv....
Check Stock

BOXI Left Side Radiator Side Engine Valve Cover w/Gasket fits for Nissan 350Z Infiniti FX35 G35 M35 2003 2004 2005 2006 2007 2008 VQ35DE 3.5L V6 Engine (Replaces # 13264-AM610 13270-8J112)

  • Fitment: Compatible with VQ35DE 3.5L V6 Engine / Motor.
  • Replaces number: 13264-AM610,13270-8J112.
  • Among the most important parts of any engine is the oil that is contained within it. There are a variety of moving parts that depend on the oil for lubrication. The valve cover goes on top of the engine and is designed to keep the oil from leaking out. Underneath the valve cover, there is a gasket that helps to add additional sealing. Without a functional valve cover gasket, it will be very hard for you to keep your engine oil where it belongs..
  • Notes:Please check the OEM Number before purchase. This is the best way to confirm the fitment. Instruction is not included. Professional installation is recommended.
Check Stock

Mesee 2 Pcs Non Return One Way Check Valve, Aluminium Alloy Petrol Diesel Water Fuel Line Check Valve for Car/ Motorcycle/Ship

  • What You Get: 2 pieces 8mm/ 5/16 inch fuel one-way check valves..
  • One Way Check Valve Design for inhibiting backflow in a line, arrow marked on valve, showing fluid flow direction..
  • Made of aluminum alloy, high performance and anti-corrosion, suitable for water, petrol, diesel, oil, and other fluids. (not applicable to methanol)..
  • Ideal fuel check valve for carburetor and low-pressure fuel systems of Peugeot cars, Renault cars, ships, helicopters, ships, motorcycles and others..
  • Easy to install and replace, just according to the little arrow on the valve, connect the fuel line. can make the pipes don't drop off with some hose clamps.
Check Stock

3M Particulate Respirator 8576, P95, with Nuisance Level Acid Gas Relief (Pack of 10)

  • NIOSH approved P95 for at least 95 percent filtration efficiency against certain oil and non-oil based particles.
  • Carbon filter material helps provide relief against nuisance levels of acid gases*.
  • Adjustable M-noseclip adjusts easily for fewer pressure points and greater comfort.
  • 3M Cool Flow Exhalation Valve – proprietary one way valve for easy exhalation and cool comfort.
  • Suited for work situations involving heat, humidity, or long periods of wear.
Check Stock

1/2\ Brass Electric Solenoid Valve,110v Ac Brass Electric Solenoid Valve for Water Air Gas Fuel Oil

  • High quality normally closed electric solenoid valve:Model:2W160-15.
  • Size:1/2 inch,Working temperature range: 23-176°F；Pressure range：0-145Psi.
  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc.Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This solenoid valve 110v was manufactured with a VITON seal,two-way inlet and outlet ports with standard female thread NPT connectionsm and heat and oil resistant Viton gasket..
  • Applicable use in many fields: Irrigation controls (garden, farm,etc.), liquid controls ( pipeline, artificial river etc. and air controls ( lab, factory, etc.).
  • Satisfaction guaranteed! Try any product we sell for a full 30 days. If not completely satisfied, return it to us for a no-hassle refund or credit..
Check Stock

FXTUL Transmission Fluid Pump, 8L Pneumatic Transmission Oil Extractor Pump Set with 20 PCS Filling Adapters 2 Way Manual ATF Refill System Dispenser ATF Pump Compatible with BMW, Ford, Audi etc.

  • ✯✯✯【Ultra-safe Design】Includes a pressure monitoring gauge to observe the flow of liquid and a safety valve (preset at 43 PSI) to relieve pressure in case of overload. Extraction working pressure: max. 170psi. / Dispensing working pressure: max. 43psi. Our transmission fluid pump is made of corrosion-resistance material, and it can withstand high pressure and also easy to wash. There will be no air leakage, cracking or liquid spilling, and also guarantee your safety..
  • ✯✯✯【Configured with 20 adapters for superb compatibility】The fluid transfer pump comes with 20 common adapters, that fit a variety of automobiles, including famous cars like BMW, Porsche, VW, Honda, Audi, and many others. Simple push-on coupler design, You can flush and change the oil for your vehicles. All the adapters are installed in a toolbox, with clear model identification..
  • ✯✯✯【8L Capacity】Our pneumatic ATF pump has an 8L large capacity. 2M PU hose with one touch controller gun to connect with transmission filling adapter enables the steady operation of the flow volume and easy to do the dispensing jobs. Without the splashing during the work. It provides an easy way to extract and dispense transmission fluid quickly and cleanly. It's an ideal tool for ....
Check Stock

Moroso 68841 Breather Kit

  • Provides an easy way of adding a breather to Moroso LS valve cover with an oil fill bung.
  • Remove knurled cap on valve cover and screw in the Part No. 68841 Breather Kit.
  • Features a billet aluminum baffled screw in adapter with a 1" breather.
Check Stock

Yamaha YACLVO Lite Valve Oil

  • The Yamaha LVO Light Superior Valve Oil is based on a newly developed synthetic formula that is more consistent than mineral-based oil to provide superior performance in all playing environments.
  • The LVO Light Oil is made up of even-sized molecules to allow the oil to evaporate smoothly, guaranteeing a longer life with extremely responsive action.
  • The Light Superior Oil is designed for instruments with tight valve tolerances, such as custom and professional trumpets and is the same oil included with all Yamaha Professional and Artist Series Custom Instruments.
  • The Yamaha LVO Light Superior Valve Oil is available in a 1.
Check Stock

Little World Shower Arm Diverter Valve - 3 Way Shower Diverter Valve, G1/2 Solid Brass Shower Head Valve Diverter for Universal Hand Held Showerhead and Fixed Spray Head Shower System (ORB, Black)

  • Lever Handle - Three-way diverter valves let you choose between the individual shower heads or both shower heads at the same time. There is NO option to close the diverter valves.
  • Universal Connection - This shower diverter valve is one G1/2 Shower Arm Inlets, and two G1/2 Shower Hose Outlets. Suitable for most shower heads.
  • Quality Brass Material - 3 way diverter valve shower is made from good quality solid metal brass in one-piece, which is durable and preservative. Don’t worry about the brass shower diverter breaking when you use it.
  • Easy Installation - The shower diverter valve has a flexible and convenient installation angle. You only need to tighten it with a wrench, and you can use it conveniently.
  • Fashion Finish - Made with Oil Rub Bronze, this 3 way chrome shower diverter perfectly matches most bathroom fixtures. Make your bathroom look more advanced and fashionable.
Check Stock

Leadrise 12V Electric Fuel Pump Universal Inline Fuel Pump Universal Low Pressure Gas Diesel Fuel Pump 2.5-4psi HEP-02A

  • ★【SPECIFICATIONS: 】 Inline Fuel Pump, Output Pressure : 2.5-4 psi, Voltage : 12 Volt, Flow Rate : 30 GPH, Hose Size : 8 mm ( 5/16 inch ).
  • ★【Electric Fuel Pump Performance:】 Low Pressure Fuel Pump, build-in check valve design to prevent back flow, light-weight and small size, Using a plunger-type of fuel supply way, suction stronger, oil supply more stable..
  • ★【12 Volt Fuel Pump: 】Upgrade check valve provides optimum traffic, reducing the noise of the pump so we can operate quietly. The Oil Absorption Capacity is Strong Enough to Ensure the Supply of Fuel.
  • ★【Easy to Install:】Universal Electric Fuel Pump 2 bolt fixing, 2 wires design, build-in check valve designed to prevent back flow. It can be used as booster, standby unit or as a completely independent fuel pump installation and mounted anywhere..
  • ★【WIDE APPLICATION:】Electric fuel pump Fit all 12 Volt Cars such as Toyota, Ford, Honda, Mazda, and any other suitable car Trucks , Boats & Generators..
Check Stock