Reviews Water To Air Intercooler- BestItemr.com

HPS AST-138 6061 T6 Seamless Aluminum Round Straight Tubing, 16 Gauge, 1' Length, 1-3/8' OD, 0.065' Wall Thickness

Great for custom fabrication project such as DIY air intake, cooling systems and turbo intercooler piping setup.
Commonly used in industrial, automotive, marine and aerospace industry.
Great for custom fabrication project such as DIY air intake, cooling systems, turbo intercooler piping.

The 300-620 top-feed plenum entry configuration is designed to allow the included Hi-Ram 105mm plenum top to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications was conceived to package with an air to water plenum mounted intercooler with a shorter overall height than possible with other existing intake manifolds..
The Holley LS1/2/6 Lo-Ram intake manifold kits are designed for GM LS Gen III & IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The fuel rail kits come with 2 sets of brackets: A set for long (usually standard length) fuel injectors & set for short (such as Pico, or LS7) fuel injectors..
NOTE: Total Height: Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top - 9.07" (without intercooler installed) | Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top, w/ intercooler installed - 9.07" + intercooler thickness.
Specs: Brand: Holley EFI | Color: Black | Construction: Cast | Emission Code: 3 | Engine: GM LS1/LS2/LS6 | Finish: Black | Flange Style: EFI | Front Height: 9.07" without Intercooler | Fuel | System Type: EFI | Manifold Type: Lo....

Powder-coated for heat resistance, 3-Piece tube set for perfect fitment and maximum flow, These Hot -Side Tubes direct heated air from the turbos to the intercooler with less restriction.
2.5" Mandrel-Bent Powder-Coated Stainless Steel, for improved flow to intercooler.
this tube upgrade combo outflowed the stock tube by 18 percent and resulted in a maximum gain of 9 horsepower and 11 lbs. X ft. of torque as verified by in-house Dyno.
These intercooler tubes works with aFe or OE Intercooler, High quality clamps and silicone couplings Included for a perfect fit and strength.
All necessary hardware included for a hassle-free installation, This system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
This item is not for sale in California/Non CARB compliant.

compatible with Ford Focus ST 2013, 2014, 2015, 2016, 2017, 2018.
Larger Intercooler Provides More Efficient Cooling Power Equals More Power.
With Wind Deflector To Tunnel Air Into The intercooler.
Instant Horsepower And Torque Gain By Replacing Factory Intercooler.
Included Hardware For Direct Bolt On Installation.
No Install Instructions, Install Perform By Experienced Professional Installer Is Recommended..

12V DC Water /Coolant Pump for Radiator/Heat Exchanger. Perfect for Air to water Intercooler, Super Charger Applications..
Volume: 30L/Min (8 Gal/Min)- Inlet outlet: 3/4" (O.D.)- 9500rpm Brushless Motor- Voltage: 12V DC- Current: 2.8A±10%- Capacity: 30L/Min (8 Gal/Min or....

Material: It is made of 100% high quality silicone..
Structure: Intake Kit featuring high quality silicone construction, 4-ply polyester.
Resistance Temperature Range: Withstands operating temperatures from -40F to 356F(428F) degrees fahrenheit..
Pressure Range: 0.3-2.4MPa, special requirement can reach to 3.0MPa..
Scope of Application: The Pipe delivers much better air flow for greater efficiency. For charge air, coolant and water, on intercooler, radiator, turbocharger and supercharger, and other systems..

Outside Diameter 3.00''/76mm - Wall Thickness 0.07''/1.8mm – Overall Length 23.60''/600mm.
Universal, Polished Aluminum, Bead rolled edges.
Used in automotive, industrial and marine, such as air intake, cooling systems, turbo intercooler piping.
FORTLUFT provides the guarantee for the Universal Turbo Intercooler Piping Aluminum tightness for the 2-year period without any limitation on the mileage after the spare part installation..

This 2.5 Inch intercooler tube kit is universal,fits for all the turbo car's upgrade and replacement(modification required). The pipe kit is largely used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite and admission line..
2.5" piping diameter, Increase 65% air flow and engine displacement,and can greatly increase engine power and torque comparing with other standard piping..
Solid all-welded construction for maximum strength and safety. Not easy to crack or break. This polished surface intercooler pipe kit is protected with anodized aluminum of waterproof and rust prevention..
Quick installation,easy slip-on. Direct replace your original damaged or rusted one. You may require to modify it..
【8-Piece Piping Set Includes】:1 x 28"x7"x 2.5" Intercooler.

CXRacing Aluminum Heat Exchanger For Air to Water Intercooler Applications.
Dual Pass Design with Inlet and Outlet on the Same Side..
Features with Two 1.2" Wide Mounting Brackets, For Easy of Installation..
Universal Fitment, Works For Many Applications..
Overall Size: 30x7x2.25 Inch Core Size: 26x6.5x2 Inch Inlet and Outlet Size: 3/4" Barbed Tube.

Reference number: 18033, 5010005, FO3012101, 44011513, 6C3Z6K775A, 6C3Z6K775A, 3C3Z6K775AA, 4C3Z6K775BA, 4C3Z6K775BA.
Fitment: fits for 2003-2007 F-250 Super Duty 6.0L intercooler.
intercooler for 2005-2007 f-350 f-450 f-550 intercooler 6.0L.
Please check the compatibility in the product description before purchase, any questions please let us know.

Direct-fit for 2019+ Ford Ranger 2.3L EcoBoost.
Dyno-proven max gains of 13.6 wheel horsepower and 13.9 lb-ft of torque when combined with Mishimoto intercooler pipes.
Intercooler increases flow by 18.6% over stock intercooler.
Intercooler pipes improve flow by 25.6% on the hot side and 16.6% on the cold side.