Reviews Water Sensing Meter

OMEM Reptile Double-Plate Digital Hygrometer Indoor Thermometer Monitor Terrarium Climbing Pet Box Temperature Humidity Gauge

  • Double-plate temperature and humidity meter, real-time test temperature and humidity, good temperature and humidity measurement helper, wide division scale, easy to read clear dial, The value is accurate, at a glance, a dual-use.
  • Fast sensing speed, simultaneous temperature and humidity sensing, multi-function silent temperature and humidity meter, mechanical sensing, no battery required.
  • Temperature measurement range: -30℃to 50℃, humidity measurement range: 0% RH to 100% RH.
  • You can also read clear degrees at long distances, as well as text and color blocks to help distinguish comfort.
  • Caring for pets, suitable for different scenes,Suitable for home, office, greenhouse, in wooden boxes or rainforest tanks, etc.
Check Stock

INA219 High Side DC Current Sensor Breakout - 26V ±3.2A Max

  • 【Mini Split Base Current Transformer】It's the smallest one compared to the similar products (output 100MA).Current Transformer, 100A 100mA AC Current Sensor, Split Core Amp Transformer Sensing Relay, Mini Clip-on Easy to Install CT Without Power Off. current sensor structure sensor.
  • 【Professional Use】Current transducer used for energy meter in special.
  • AC 220v, 380v power supply can both be applied.plit Core Current Transformer,AC Current Sensor,Output Class Analog Sensor,Working Principle Magnetic Sensor, Useful for Measuring Whole Building Electricity Consumption.current sensing relay isolation.
  • 【Good Mechanical Properties】Fully enclosed, good mechanical properties and environmental resistance, strong voltage isolation capability, safety and reliability..
  • 【Snap Joint Structure】The diameter of inner hole is 16mm, the accuracy is 0.5 grade, Using snap joint structure, it can be fixed to the cable directly through nylon ties..
  • 【Easy to use】When you fix the energy meter, you don't need to cut off the power if you use this product. Split Core Current Transformer Coil Sensor for 100A Amp Energy Meter.ac transformer amp meter amp tester.
Check Stock

Garmin Rally RK200, Dual-sensing Power Meter, Compatible with LOOK KEO Cleats

  • Superior pedal design installs like any other pedal and quickly transfers between bikes.
  • Rally RK200 dual-sensing power meter measures total power, cadence, left/right balance, seated versus standing, platform center offset and power phase.
  • Affordable power meter with option to upgrade to dual-sensing system.
  • Works seamlessly with the Garmin ecosystem to allow for easy software updates via your Garmin watch, Edge cycling computers or your compatible smartphone.
  • For postride analysis, data sharing, mapping, route planning and more, sync your data with the Garmin Connect app as well as platforms such as Strava, TrainingPeaks and Zwift.
Check Stock

RC Watt Meter DC 60V/100A Digital LCD Balance Voltage Battery Power Analyzer Wattmeter Tester Checker Watt Volt Amp Meter

  • Measures 0 to 60 Volts. Works on 12, 24, 36, and 48 volt battery bank systems..
  • Precision Alu-Chrom current sensing resistor, with only 0.001 Ohms resistance and circuitry that draws only 7 mA..
  • This is the All-In-One Meter:a power meter, a volt meter, an amp-hour meter, ammeter and energy meter.Digital LCD screen gives clear crisp number readings..
  • Perfect troubleshooting tool:it's indispensable for analyzing, testing and troubleshooting any DIY DC power project..
  • Professional RC Watt Meter is an excellent addition to your RC hobby, DC circuits, Solar system, Boat/RV & Battery Backup systems!.
Check Stock

HiLetgo 10pcs IR Infrared Obstacle Avoidance Sensor Module for Arduino Smart Car Robot 3-Wire Reflective Photoelectric for Arduino Smart Car Robot

  • FLEXIBLE FORCE SENSITIVE SENSOR OFFERS EXTREME SPEED RESPONSE--The flexible sensor has the characteristics of flexible ultra-thin, and extreme speed response, etc.
  • WIDELY APPLICATIONS FOR VARIETY ITEMS' DETECTING--This Force Sensing Resistor has widely applications during daily life, such as off-bed monitoring, intelligent breathing belt, sleep monitoring, electronic shelf.
  • DUAL WATER-PROOF AND PRESSURE SENSITIVE FSR SENSOR--Waterproof and pressure sensitive dual function.
  • DESIGNED WITH HIGHLY SENSITIVE NANO-METER MATERIAL REACHES HIGHLY SENSITIVE DETECTION--Highly sensitive flexible nano-meter materials can realize highly sensitive detection of pressure.
  • GOOD DURABILITY AND HIGH EFFICIENCY FLEX/BEND SENSOR--High sensitivity and long service life.
Check Stock

RCYAGO Dissolved Oxygen Meter with Electrode Filling Fluid

  • Dissolved oxygen meter is a precision instrument for measuring dissolved oxygen and temperature. The dissolved oxygen probe is a thin film with a polarographic sensor and a thermistor for temperature measurement and temperature compensation. The permeable membrane separates the measured solution from the sensing electrode but allows oxygen to pass through the membrane to react, and the concentration can be measured..
  • Dissolved oxygen refers to the concentration of molecular oxygen dissolved in water, generally expressed in mg/L (ppm) and saturation percentage (%), which is the percentage of dissolved oxygen in 1L of water. The oxygen concentration of our dissolved oxygen meter is 0.0-40.0mg/L, most of the range of dissolved oxygen meters on the market is 0.0-20mg/L. When measuring and calibrating, needn't open the protective cover of the electrode, just put the electrode in the solution for measurement..
  • Detachable probe, easy to replace, equipped with 6 probe protective covers and anaerobic water calibration powder. The film inside the protective cover cannot be taken apart. After using it for a period of time, the test value is inaccurate and the calibration is still inaccurate, and the membrane sleeve needs to be replaced..
Check Stock

Fluke 325 Clamp Multimeter AC-DC TRMS

  • Digital clamp meter measures AC current to 400 amp, AC and DC voltage to 600V, and resistance to 4 kilohms.
  • True RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform.
  • Jaw opening measures current in a conductor up to 30mm without touching or interrupting the circuit.
  • Audible continuity sensor confirms that the circuit conducts electricity.
  • Meets IEC safety standard 61010-1, and is rated for CAT IV installations to 300V and CAT III installations to 600V.
Check Stock

IDEAL INDUSTRIES INC. 61-744 Clamp Meter 600 Amp AC with NCV, Voltage Indicator, CATIII for 600v

  • [Auto-Ranging Clamp Meter]: The meter measures AC Current to 600 amp, AC and DC Voltage to 600 V, Resistance to 40MΩ and Capacitance to 4MF. Does not measure DC Current..
  • [True-RMS Amp Meter]: The sensing meter accurately measures distorted waveforms and provides true readings when measuring linear or non-linear loads..
  • [Advanced Functions]: Auto-off of inactivity after 15 minutes, Data Hold, MAX/MIN Reading, Low Battery Indicator and Continuity Loud Buzzer..
  • [Two-Color Backlight and Work Light]: Two-color backlit LCD Display - When the voltage 003e 80V, the current 003e 3A, the LCD backlit screen turns orange to warn you, The LCD Backlit Screen and Work Light make it easy to use in a dark working area..
  • [Suprior Safety and Service]: Standard IEC 61010-1, CAT III 600V. Double insulation. 36 Months product service provided. 7/24 Customer Service..
Check Stock

Fieldpiece SC680 - Wireless Power Clamp Meter

  • Mid-size clamp meter has every parameter for electrical and thermal HVACR testing in one meter.
  • One of the most durable clamp meters in the industry that gives higher accuracy VAC & AAC readings on VFD with True RMS sensing technology.
  • Ranges include temperature, capacitance, microamps DC for flame diode tests, and everyday electrical ranges for HVACR.
  • Auto and manual ranger with safety features including a high-voltage LED and beeper, a continuity warning, push button non-contact voltage (NCV).
  • Detachable leads and alligator probe tips for safe and easy one-handed testing.
Check Stock

Training and Racing with a Power Meter

  • ...ut while only being the size of a bottle cap, weighing less than 0.3 ounce. AROFLY Power Meter is directly installed to cycle rear valve (Only for CLINCHER tires) to monitor how the output from either of your legs change along the ride and keep you focused on your performance..
  • 【Patented Dynamic Pressure Variation Sensing Technology】The AROFLY Power Meter measures your ride power output by monitoring the variating tire pressure and other measurements combined. This is the first ever wheel-based power measurement system for accurate output recording..
  • 【Simple installation】Complete installation in under 10 minutes with no tools required, no modification to your drivetrain. Package contains LINK A1 Transmitter, Cadence Sensor and Power Meter, suitable for most types of bike tires, including Presta & Schrader Valves. AROFLY guarantees the riding experience and training quality of every cyclist through the rare tire pressure monitoring. **NOTE: Only works with Clincher tires, not compatible with Tubular or Tubeless..
  • 【Customer Experience Satisfaction】Your satisfaction is always our priority. We offer a one-year warranty for after-sales service and will give you comprehensive support when any issues occur..
Check Stock

Evangelia.YM Aquarium Fish Tank Thermometer, Glass Meter Water Temperature Sensing Thermometer Gauge with Suction Cup Clearly Easy to Read Scale (Clear)

  • ❀ Clearly readable scale tells you to understand the temperature at two degrees Celsius and Fahrenheit..
  • ❀ It is floating and fixed by the attached sucker..
  • ❀ Easy to install, simply place it in the tank and connect the suction cup to the inside of the tank for easy reading..
  • ❀ Since this thermometer is in the tank, it reads the water temperature exactly as it is.
  • ❀ Aquarium Fish Tank Thermometer, Glass Meter Water Temperature Sensing Thermometer Gauge with Suction Cup Clearly Easy To Read Scale.
Check Stock

Megger MIT310-EN Insulation Tester, 1000 Megaohms Resistance, 250V, 500V, 1000V Test Voltage

  • Insulation tester for testing insulation resistance, voltage, and continuity in electrical installations.
  • Average-sensing meter provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform.
  • Dual digital display with analog arc function to replicate response of analog meters.
  • Measures insulation resistance from 0 to 1,000 megohms, voltage from 0 to 600V, and continuity from 0.01 to 100 ohms.
  • Safety rated to European Standard EN61010-1 Category III, 600V and IP54 rated for protection against dust and splashing water.
Check Stock

Fluke 324 True RMS Clamp Meter

  • Digital clamp meter measures ac current to 400 amp, ac and dc voltage to 600v, and resistance to 4 kilohms.
  • True RMS sensing meter provides accurate readings when measuring linear or non linear loads, regardless of waveform.
  • Jaw opening measures current in a conductor upto 30 millimeter without touching or interrupting the circuit.
  • Audible continuity sensor confirms that the circuit conducts electricity.
  • Meets IEC safety standard 61010 1, and is rated for CAT IV installations to 300V and CAT III installations to 600V.
  • CAT IV 300V/CAT III 600 Volt safety rating.
Check Stock