Reviews Water Pump Motors

Rule 500 GPH 25SA Electronic Sensing Bilge Pump-500

  • Head: 4.0M, Wire Lead: 1M, Outlet Dia: 29mm(1-1/8"), Dimension: 5.92“*4.21"/150.5mm*107mm..
  • 【Switch】Built-in float switch: No float switch required.Pump turns on when water level rises & shuts off when water is removed. Snap-off strainer for easy cleaning.
  • 【Long life motor】 :Water cooled motors for long life, with anti airlock design and moisture tight seals.Heavy duty motors with stainless steel shafts and tough thermoplastic bodies..
  • 【Durable】: All (Auto) Bilge Pumps are built with compact, rust and corrosion protected stainless steel shaft, high-impact durable and thermoplastic ABS plastic housing..
  • 【Fast Speed】When water level rises,pump can turn on bout 1 1/2 inch when it’s sitting in the bottom of the bilge at the back of the boat. It definitely pumps the water out fast! 5 Gallons underneath motor and the pump spit it out in about 20 seconds..
Check Stock

creatorele Submersible Marine Auto Boat Bilge Pump 1100GPH Electric Boat Plumbing Automatic 12V

  • Connections: For 19mm (3/4") bore hose for 600GPH &750GPH, 29mm hore hose for 1100GPH. Output: Up to 1100 gallons/hour. Max. recommended discharge head 2.5m..
  • All-in-one pump & switch - No float switch required.Pump turns on when water level rises & shuts off when water is removed. Snap-off strainer for easy cleaning..
  • Water cooled motors for long life, with anti airlock design and moisture tight seals.Heavy duty motors with stainless steel shafts and tough thermoplastic bodies..
  • Totally submersible and ignition protected.Compact pump for smaller vessels. Tough plastic body.Limited one year warranty..
  • Can be used with switch panel for manual override.Includes comprehensive user manual with installation instructions and wiring diagram..
Check Stock

SAILFLO Boat Marine Shower Sump Pump Drain Kit System - 12v - 750 GPH - Multi-Port Inlet

  • All-in-one pump & switch – No float switch required.
  • Pump turns on when water level rises & shuts off when water is removed.
  • Water cooled motors for long life, with anti airlock design and moisture tight seals. Heavy duty motors with stainless steel shafts and tough thermoplastic bodies..
  • Output: 750 gallons/hour, Max. recommended discharge head 3.0m..
Check Stock

Ogrmar Automatic Boat Bilge Pump Float Switch Moisture Tight Seals 12/24/32VDC Ignition Protected Mercury

  • Compact efficient long life motors: Small volumn and portable bilge pump is made of long life motors .It can Improve work efficiency.
  • Exclusive Moisture Ting Seals: Bilge pump is made from heavy duty marine sealant and corrosion material Protection.
  • Cleanable Strainer: The pump base is used by high qulity easy clean snap lock strainers. the life-span of the bilge pump could be prolonged..
  • Easy to Install: Design common installation location and it can use with the bilge switch.
  • Wide Application : Bilge pump can be used in aquarium,fishing boats,fountain and other places to easily drain the water.
Check Stock

Dilwe RC Boats 370 Water Cooling Pump with Motor Waterproof JR Plug Pump for RC Aircraft Carriers, Warships, Battleships

  • Waterproof DesignThe RC water pump is waterproof and works well in water, JR plug suitable for plug into the receiver, plug and play..
  • Long Working TimeUnder the condition of 5V voltage, the pump works continuously for 15 hours and pumps water continuously..
  • Application forPut it to work normally, the temperature will be hot, but it belongs to the normal range and will not affect the use, suitable for RC aircraft carriers, warships, battleships, etc. on a series of remotecontrolled ships that require water cooling for motors and ESCs..
  • Stable PerformanceThe power supply method is not to take power from the receiver, the battery used is greater than 2S and the voltage is between 728V, which is need to use a stepdown module to make the operation more stable..
  • Special NoteThe RC water pump is suitable for installation on remote control boats that require water cooling with watercooled motors and without waterabsorbing steering gear..
Check Stock

Johnson Pumps - 22102 PROLINE Bilge Pump 1000 GPH 2.5A

  • No one wants to worry that their boat is slowly taking on water because the bilge pump has failed. Well, you can sleep soundly with the reliable 2000 bilge pump on the job.Small size, high efficiency, low current (low cost switching power supply supporting).
  • to achieve a small size perfect combination of high flow..
  • It is non-automatic and must be paired with a float switch or sensor and ON/OFF/AUTO switch. Unique automatic "discharge" function can bear the long-term continuous operation under nearly congestion condition Impact resistant ABS housing.
  • Used in a boat,you can also use it in solar powered waterfall for your backyard, in a battery back-up sump system,etc. It empties the bilge roughly 25% faster than 1500gph bilge pump,and will continue to pump even when it encounters some minor debris.
  • Heavy duty motors with stainless steel shafts and tough. thermoplastic bodies submersible bilge pumps are tough enough for any bilge.Tough, efficient, long life motor.Offer high capacity output Water cooled long-life motors.
  • Ignition protection Water/moisture tight seals.
  • Snap lock strainer base for easy installation and removal.
Check Stock

ABN Water Pump Sprocket Retainer Tool - Full-Circle Sprocket Holding Tool Compatible with 2.2L GM Vauxhall Opel

  • [Protect Your Vehicle from Engine Damage] Secure the water pump sprocket with the ABN Water Pump Sprocket Holder to prevent engine vibration and....
  • [Ensure Easy Maintenance] Remove the access plate then line up holes on the water pump tool to your sprocket.
  • Use included bolts and cover bolts to....
  • [Fits Your Vehicle] Water pump sprocket retainer holding tool is compatible with 2.2L Ecotec motors found in GM, Vauxhall, and OPEL vehicles.
  • [Built to Last] Heavy-duty steel provides maximum strength and durability while the black-oxide finish resists corrosion.
  • [Package Contents] Each water pump pulley holder tool includes (1) water pump holding tool and (3) 5.5mm water pump bolts with 1.4-inch (3.5cm) length.
Check Stock

YaeMarine 12V 800gph Livewell Baitwell Pumps Live Bait Tank Aerator Pump Submersible Cartridge Boat Bilge Pump

  • The internal anti-airlock fins ensure even flow of water to your livewell Smaller profiles to fit in more confined spaces, The cartridge is easy to remove for cleaning or replacement..
  • Pump is fully submersible and utilizes tin-coated, 16-gauge wire for safety 90° threaded intake, 125mm long Includes two different outlet hose tail configurations - Straight and 90°..
  • Water cooled motors for long life, with anti airlock design and moisture tight seals. Stainless steel shafts suitable for fresh or salt water, Extra length for thicker transom..
  • High-impact durable plastic housing Extremely efficient, very low current draw and offer high capacity output Water cooled long-life motors..
  • Totally submersible and ignition protected, Ignition protection to protect the pump against high current Water/moisture tight seals Silent and vibrationless operation Anti-airlock protection..
Check Stock

Amarine Made 12V 1100 GPH Auto Submersible Boat Bilge Water Pump with Float Switch 3/4 inch Outlet, Automatic All-in-one 3.2A Ignition Protected Marine Emergency Pump for Saltwater Freshwater

  • Head: 2.5M, Wire Lead: 1M, Outlet Dia: 28.5mm(1-1/8"), Dimension: 155*90*115mm.
  • ✔Built-in float switch:Compact, automatic, fully submersible electric pump,Built-in float switch! (No separate float switch is needed).
  • ✔Long life motor :Water cooled motors for long life, with anti airlock design and moisture tight seals.Heavy duty motors with stainless steel shafts and tough thermoplastic bodies..
  • ✔Durable: All (Auto) Bilge Pumps are built with compact, rust and corrosion protected stainless steel shaft, high-impact durable and thermoplastic ABS plastic housing..
  • ✔No power use until pump is activated by internal float switch (when water level rises).Pump turns on when water level rises & shuts off when water is removed. Snap-off strainer for easy cleaning.
Check Stock

MUKCHAP 4 PCS Fan Clutch Wrench, 32mm Automotive Cooling Fan Clutch Nut Wrench & Water Pump Holder Removal Tool Kit for BMW Ford and More

  • The water pump sprocket retainer holding tool is used for holding timing chain in place so water pump can be removed for service. Prevent engine vibration and whining and to keep the timing chain in place to avoid camshaft readjustments.
  • The water pump sprocket retainer holding tool is compatible with GM, Vauxhall, and OPEL 2.2L 2.4L Ecotec motors, also fit for Chevrolet fit for Oldsmobile fit for Pontiac and Saturn vehicles.
  • Easy to Use: Simply remove the access plate, line up holes on the water pump tool to your sprocket.
  • Use included bolts and cover bolts to install the tool.
  • Made of higher carbon steel, high hardness, not easy to break, The exterior is coated with black antioxidant layer, extended service life. Water pump sprocket tool has a 3.9-inch (9.9cm) diameter and a 1.3-inch (3.3cm) depth.
  • The water pump pulley holder tool includes 1 pc water pump holding tool, 3pcs 5.5mm water pump bolts with 1.4-inch (3.5cm) length.
Check Stock

Performance Tool W89210 Water Pump Sprocket Holder For GM Ecotec GM 2.2L and 2.4L Chevrolet Oldsmobile Saturn Pontiac Ecotec engines

  • Holds Water Pump Sprocket on 2002 to current GM Ecotec motors so water pump can be serviced..
  • Special design allows easy application regardless of sprocket orientation..
  • Saves costly loss of time by holding the water pump sprocket in place while removing pump..
  • Use on GM 2.2L and 2.4L Chevrolet, Oldsmobile, Saturn, Pontiac Ecotec engines..
Check Stock

ARES 70074 - 2-Piece Fan Clutch Wrench Set - 32mm Fan Clutch Nut Wrench - Water Pump Holder Removal Tool Kit

  • ... easy to operate. Simply remove the access plate from the front cover, and then line up holes on the water pump tool to the sprocket. It can be easily installed regardless of the orientation of the timing chain..
  • 【Application】The water pump retainer tool saves costly loss of timing on fit for GM 2.2L 2.4L Ecotec motors found in fit for Chevrolet, fit for Oldsmobile, fit for Pontiac, fit for Saab, and fit for Saturn platforms, service range 2002 to current..
  • 【Necessary Tool】The water pump holding tool is a necessary tool for you to replace the water pump. At the same time, it can prevent engine vibration and whining, effectively save your working time and improve workshop productivity..
Check Stock

SmarTopus Electric Liquid Transfer Siphon Pump for Diesel, Fuel, Oil, Water and More,Battery Operated Power Siphon Pump for Gasoline(By SmarTop)

  • 【Upgraded Power Designed by SmarTop】: The siphon fuel transfer pump can transfer 6-7 quarts of water per minute. The motors of siphon pump has long service life. The motor of gas pump is low mute, and there will be no noise to bother you..
  • 【Widely Application】:This portable handy transfer pump can be used for any non-corrosive Liquids such as Kerosene, Light Oils, Diesel Oils, Chemical Insecticides, Toluene, Light Solvents, Gasonline, Water (Not for Drinking Water) Alcoholic Drinks etc.Useful in garage, aquarium, home, yard, basement, bathroom and so on..
  • 【Clean and Easy to Use】: All you have to do with this siphon pump is press a button! The fuel transfer pump operate with two "D" batteries(not included). Unscrew the cap on the gas pump handle and insert the batteries. Switched it on, siphon pump can move liquid. Press again, liquid transfer pump stopped..
  • 【Makes Transferring Liquids A Breeze】:Safely and easily transfer liquids with this convenient handheld pump to pumps gas, water, oil and other non-corrosive liquids.No more struggling with pouring by hand and using a funnel that never seems to work correctly, and thereby spilling gas down the side of your vehicle..
  • high-quality】: Fuel transfer pump is made of food gra....
Check Stock